NAVY QPL-AS81934-2013 BEARINGS SLEEVE PLAIN AND FLANGED SELF-LUBRICATING GENERAL SPECIFICATION FOR.pdf
《NAVY QPL-AS81934-2013 BEARINGS SLEEVE PLAIN AND FLANGED SELF-LUBRICATING GENERAL SPECIFICATION FOR.pdf》由会员分享,可在线阅读,更多相关《NAVY QPL-AS81934-2013 BEARINGS SLEEVE PLAIN AND FLANGED SELF-LUBRICATING GENERAL SPECIFICATION FOR.pdf(110页珍藏版)》请在麦多课文档分享上搜索。
1、QPL-AS819342013-12-24QUALIFIED PRODUCT LISTOFPRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATIONSAE-AS81934BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING, GENERAL SPECIFICATION FOR1 of 110Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2013-12-24If past the certification date, contact Qu
2、alifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This QPL has been prepared for use by or for the Government in the acquisition of products covered by the subject non-Government standard and inclusion of a product is not i
3、ntended to and does not connote endorsement of the product by the Department of Defense. All products included herein have been qualified under the requirements for the products as specified in the latest effective issue of the applicable non-Government standard. This QPL is updated as necessary and
4、 is subject to change without notice. Inclusion of a product does not release or otherwise affect the obligation of the manufacturer to comply with the non-Government standard requirements.THE ACTIVITY RESPONSIBLE FOR QUALIFICATION APPROVAL IS THE NAVAL AIR SYSTEMS COMMAND, (CODE 4.3.5.3), 48110 SHA
5、W ROAD, BLDG. 2187, PATUXENT RIVER, MD 20670-1908.THE ACTIVITY RESPONSIBLE FOR THIS QUALIFIED PRODUCTS LIST IS THE NAVAL AIR SYSTEMS COMMAND (ATTENTION: COMMANDER, NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION, CODE 4L8000B120-3, HIGHWAY 547, LAKEHURST, NJ 08733-5100). Provisions for Government Procure
6、ment. Procurement of these bearings shall be in accordance with FAR 52.225-3 (Buy American Act) and DFAR 52.225-7012 (Preference for Domestic Specialty Metals). The contractor should include these provisions in every subcontract and purchase order.NOTE: 1. Each bearing manufacturer listed in this QP
7、L is approved to supply its approved unplated bearings (listed herein) with the outside diameter zinc-nickel plated according to SAE-AMS 2417, Type 2 or cadmium plated according to QQ-P-416, Type II, Class 2 when plating is specified by the purchaser. The designation for plated parts is characterize
8、d by addition of the letter P to the Non-Government Standards Body (NGSB) designation for the unplated parts. For existing inventories, cadmium plated parts are acceptable.2. Each bearing manufacturer listed in this QPL is approved to supply its approved bearings (listed herein) with oversize outsid
9、e diameters when an oversize bearing is specified by the purchaser. There are two permissible oversize diameter increments (0.010 and 0.020 inch oversize). The designation for an oversize part is characterized by the addition of the letters T or U to the NGSB designation (T for 0.010 inch oversize,
10、and U for 0.020-inch oversize).The addition of the letters PT to the NGSB designation indicates plated oversize bearings.3. Each bearing manufacturer listed in this QPL is approved to supply its approved bearings (listed herein) in all length codes established in Table 2 of the SAE-AS91934/1 and SAE
11、-AS81934/2 specification sheets.4. “Type A“ parts are a suitable replacement for “non-Type A“. The inverse is not true. “Type A“ indicates qualification to 100,000 cycles vs. 25,000 cycles for “non-Type A“. “Type A“ is indicated by an “A“ code following the MS specification number (ex. MS14101A-8 is
12、 a suitable replacement for MS14101-8 however MS14101-8 is not a suitable replacement for MS14101A-8).GOVERNMENT DESIGNATION MANUFACTURER DESIGNATION TEST REFERENCE CAGE CODESupplier TypeCertified StatusStop ShipM81934/1-04A AJB-4TA-XXX NAWCADWAR ltr Ser 435200R08/006195 of 5 Dec 199556644 M Green U
13、ntil: 24-MAR-15NQPL-AS819342 of 110Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2013-12-24If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GOVERNMENT DESIGNATION MANUFACTU
14、RER DESIGNATION TEST REFERENCE CAGE CODESupplier TypeCertified StatusStop ShipM81934/1-04A AJB-4TA-XXX 56644 P Green Until: 24-MAR-15NM81934/1-04A GBJMS10XX-04A NAVAIR ltr Ser AIR-4.3.5BEW/ 7.4319 of 11 Jun 20010HUZ6 M Green Until: 06-JAN-15NM81934/1-04A GBJMS10XX-04A 0HUZ6 P Green Until: 06-JAN-15N
15、M81934/1-04A KRJ4YB-XXXM NADC ltr 3021 7406 of 9 Sep 197650632 M Green Until: 28-FEB-15NM81934/1-04A KRJ4YB-XXXM 50632 P Green Until: 28-FEB-15NM81934/1-04A KRJ4YB-XXXS NADC ltr 6061 Ser 8906 of 29 Nov 197850632 M Green Until: 28-FEB-15NM81934/1-04A KRJ4YB-XXXS 50632 P Green Until: 28-FEB-15NM81934/
16、1-04A 06-382-04 NADC ltr 3021 2884 of 8 Apr 197609455 M Green Until: 17-JAN-15NM81934/1-04A 06-382-04 09455 P Green Until: 17-JAN-15NM81934/1-04A AD04AXXX (SEE NOTES) NADC ltr 3021 5822 of 16 Jul 197615860 M Green Until: 10-NOV-14NM81934/1-04A AD04AXXX (SEE NOTES) 15860 P Green Until: 10-NOV-14NM819
17、34/1-04A AD04AXXX(L) (SEE NOTES) NADC ltr 3021 5822 of 16 Jul 1976 and NADC ltr 6061/7998 of 10 Jul 198615860 M Green Until: 10-NOV-14NM81934/1-04A AD04AXXX(L) (SEE NOTES) 15860 P Green Until: 10-NOV-14NM81934/1-04A AHJ04AXXX (SEE NOTES) NADC ltr 6061 9477 of 23 Nov 1977S0352 M Green Until: 13-MAY-1
18、6NM81934/1-04A AHJ04AXXX (SEE NOTES) S0352 P Green Until: 13-MAY-16NM81934/1-04A AHJ04AXXX(L1) (SEE NOTES) NADC ltr 6061 9477 of 23 Nov 197715860 M Green Until: 10-NOV-14NM81934/1-04A AHJ04AXXX(L1) (SEE NOTES) 15860 P Green Until: 10-NOV-14NM81934/1-04A HJ341-04A NADC ltr 6061 4076 of 18 Apr 1985027
19、58 M Green Until: 17-JAN-15NM81934/1-04A HJ341-04A 02758 P Green Until: 17-JAN-15NM81934/1-04A KDJ04AXXX-341 NADC ltr 3021 272 of 14 Jan 197697613 M Green Until: 23-JUL-14NM81934/1-04A KDJ04AXXX-341 97613 P Green Until: 23-JUL-14NM81934/1-04A MBAA-4-XXX NADC ltr Ser 6061/04152 of 17 May 198881376 M
20、Green Until: 17-JAN-15NM81934/1-04A MBAA-4-XXX 81376 P Green Until: 17-JAN-15NM81934/1-04A PBE 04AXXX NADC ltr 4123 Ser 6061/00650 of 25 Jan 1988, NADC ltr 4123 Ser 6061/8159 of 11 Sep 1987, and NAVAIR ltr Ser AIR-4.3.5BEW/ 5.4390 of 20 Sep 200173134 M Green Until: 09-APR-15NM81934/1-04A PBE 04AXXX
21、73134 P Green Until: 09-APR-15NQPL-AS819343 of 110Source: QPD at https:/assist.daps.dla.mil - QPL Date: 2013-12-24If past the certification date, contact Qualifying Activity for status.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-GOVERNMENT DESIGN
22、ATION MANUFACTURER DESIGNATION TEST REFERENCE CAGE CODESupplier TypeCertified StatusStop ShipM81934/1-04A PT52004 NAVAIR ltr Ser AIR-4.3.5BEW/ 7.4416 of 07 Nov 2001 (Type III) NAVAIR ltr Ser AIR-4.3.5BEW/ 5.4337 of 27 Jun 2001(Type II) NAVAIR ltr Ser AIR-4.3.5BEW/ 7.4047 of 10 May 1999 (Basic)57606
23、M Green Until: 12-JAN-15NM81934/1-04A PT52004 57606 P Green Until: 12-JAN-15NM81934/1-04A FBPA04AXXX Ser AIR 4.3.5.4BEW/7.4978 of 05 Jun 2006D3279 M Green Until: 19-MAR-15NM81934/1-04A FBPA04AXXX D3279 P Green Until: 19-MAR-15NM81934/1-04A ML04AXXX (SEE NOTES) Ser AIR-4.3.5BEW/7.4670 dtd 13 Aug 2003
24、15860 M Green Until: 10-NOV-14NM81934/1-04A ML04AXXX (SEE NOTES) 15860 P Green Until: 10-NOV-14NM81934/1-04A PBHP04AXX Ser AIR-435BEW/7.5174 dtd 29 Jul 200873134 M Green Until: 09-APR-15NM81934/1-04A PBHP04AXX 73134 P Green Until: 09-APR-15NM81934/1-04A 13BAZ04 Ser AIR 4.3.5BEW/10.5523 dtd 03 Jun 20
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NAVYQPLAS819342013BEARINGSSLEEVEPLAINANDFLANGEDSELFLUBRICATINGGENERALSPECIFICATIONFORPDF

链接地址:http://www.mydoc123.com/p-984602.html