NAVY MIL-STD-1686 C-1995 ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOS.pdf

《NAVY MIL-STD-1686 C-1995 ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOS.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-STD-1686 C-1995 ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOS.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、DEPARTMENTmEPlMIL-STD-1686C25 October 1995SUPERSEDINGMIL-STD-1686B31 December 1992OF DEFENSESTANDARD PRACTICEIELECTROSTATIC DISCHARGE CONTROL PROGRAM FORPROTECTION OF ELECTRICAL AND ELECTRONIC PARTS,I ASSEMBLIES AND EQUIPMENT (EXCLUDINGELECTRICALLY INITIATED EXPLOSIVE DEVICES)IAMSC NIA AREA RELII.Pr

2、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. MIL-STD-168 6CI. .FOREWORD1. This standard is approved for use by all Departments andAgencies of the Department of Defense.2. This standard covers the establishment andimplementation of an Electrostatic

3、 Discharge (ESD) ControlProgram for any activity that designs, tests, inspects, services,manufactures, processes, assembles, installs, packages, labels,or otherwise handles electrical or electronic parts, assembliesand equipment susceptible to damage by static electricity. Thisdocument provides cont

4、rol program requirements for ESD sensitive(ESDS) items susceptible to damage from discharges of up to15,999 volts Human Body Model (HBM) Classes 1-3. This standarddoes not apply to electrically initiated explosive devices orpart level design requirements. MIL-HDBK-263 provides additionalinformation

5、relative to the implementation of this standard.3. Electrostatic charges are generated by the relativemotion, physical separation of materials or flow of solids,liquids, or gases. Common sources of ESD include personnel,items made of common plastics, an”dprocessing equipment. ESD candamage parts by

6、direct contact with a charged source or bycharges induced from electrostatic fields. Examples of ESDSparts are micro-circuits, discrete semiconductors, thick and thinfilm resistors, hybrid devices and piezoelectric crystals.4. Beneficial comments (recommendations, additions,deletions) and any pertin

7、ent data which may be of use inimproving this document should be addressed to: Commander, NavalSea Systems Command, SEA 03R42, 2531 Jefferson Davis Highway,Arlington, VA 22242-5160, by using the Standardization DocumentImprovement Proposal (DD Form 1426) appearing at the end of thisdocument or by le

8、tter.iiProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-.IMIL-STD-1686CCONTENTSPARAGRAPH1.1.11.21.32.2.12.22.2.12.32.43.4.4.14.1.15.5.15.1.15.25.2.15.2.1.15.2.1.25.2.1.35.2.25.2.2.15.2.2.25.2.2.3FOREWORD SCOPEPurpose Scope Application APPLIcABLE DOCUM

9、ENTSGeneral Government documents. Specifications, standards, andhandbooks Non-Government publications Order of precedence. .DEFINITIONSGENERAL REQUIREMENTSGeneral Tailoring of this standard .DETAILED REQUIREMENTSESD control program plan .Subcontractor control .-Classification of ESDS parts,assemblie

10、s and equipment .Part ESD sensitivity classes andclassification .HBM sensitivity classification .MM sensitivity classification CDM sensitivity classification .Assembly/Equipment classificationand design hardening. Direct contact, non-operatingassembly, 2,000 V body/finger orhand/metalHBMtests. Direc

11、t contact, operating equipment,4,000 V hand/metal HBM test Indirect contact, operatingequipment, 4,000 V furnituremodel test .iiiPAGEii111111112455555557888999911.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILSTD-1686CCONTENTSPAPAGRAPH5.35.45.55

12、.65.75.7.15.7.25.85.95.10Protected areas Handling procedures. .Protective covering. .Training -.-Marking of hardware Assemblies .Equipment Packaging Quality assurance reviews and audits.Failure analysis .6. NOTES6.1 Intended use .6.2 Issue of DoDISS 6.3 Subject term6.4 Changes from(key word) listing

13、 previous issue FIGURE1.2.TABLEI.II.III.IV.Tailoring flow chart .Electrostatic discharge symbol.Classes of ESDS parts. .ESD test standards/methods forclassification of ESDS parts .ESD assembly/equipment designhardening goals ESD test standards/methods forhardening of ESDS assemblylequipment.PAGE1112

14、12121212131313131313141414612-181011ivProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I . .MIL-STD-1686C1. SCOPE1.1 Purpose. The purpose of this standard is to establishcomprehensive requirements for an ESD control program to minimizethe effects of E

15、SD on parts, assemblies, and equipment. Aneffective ESD control program will increase reliability anddecrease both maintenance actions and lifetime costs. Thisstandard shall be tailored for various types of acquisitions.1.2 a. This standard defines the performancerequirements for an ESD control prog

16、ram for electrical andelectronic parts, assemblies, and equipment, susceptible todamage from ESD. Electrically initiated explosive devices andpart level design are excluded from these requirements. Thisstandard covers identification, testing, classification, assemblyand equipment design criteria, pr

17、otected areas, handlingprocedures, training, marking of hardware, protective coveringand packaging, and provides for quality assurance requirements,audits and reviews.1.3 Application. This standard shall apply to Governmentactivities and contractors, subcontractors, suppliers, andvendors. When this

18、standard is applied to Government activitiesthe term “contractor” shall be replaced with “Governmentactivity” as appropriate.2. APPLICABLE DOCUMENTS2.1 General. The documents listed in this section arespecified ions 3,4, and 5 of this standard. This sectiondoes not include documents cited in other s

19、ections of thisstandard or recommended for additional information or asexamples. While every effort has been made to ensure thecompleteness of this list, document users are cautioned that theymust meet all specified requirements documents cited in sections3,4, and 5 of this standard, whether or not

20、they are listed.2.2 Government documents.2.2.1 Specifications, standards, and handbooks. Thefollowing standards and handbook form a part of this document tothe extent specified herein. Unless otherwise specified, theissues of these documents are those listed in the issue of theDepartment of Defense

21、Index of Specifications and Standards1-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1686C(DoDISS) and supplement thereto, cited in the SOliCitatiOn(See6.2).STANDARDSMILITARYMIL-STD-750 -MIL-STD-883 MIL-sTD-2073-1 -MIL-STD-2073-2 -HANDBOOKM

22、ILITARYMIL-HDBK-263 -Test Methods forDevices.Test Methods andSemiconductorProceduresfor Microelectronics.DOD Materiel Procedures forDevelopment and Application ofPackaging Requirements.Packaging Requirement Codes.Electrostatic DischargeControl Handbook forProtection of Electrical andElectronic Parts

23、, Assemblies,and Equipment (ExcludingElectrically InitiatedExplosive Devices). (Metric)(Unless othemise indicated, copies of federal and militaryspecifications, standards, and handbooks are available from theStandardization Documents Order Desk, Bldg. 4D, 700 RobbinsAvenue, Philadelphia, PA 19111-50

24、94.)2.3 NonGovernment publications. The following documentsform a part of this document to the extent specified herein.Unless otherwise specified, the issues of the documents which areDoD adopted are those listed in the issue of the DoDISS cited inthe solicitation. Unless otherwise specified, the is

25、sues ofdocuments not listed in the DoDISS are the issues of thedocuments cited in the solicitation(see 6.2). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1686CAMERICAN NATIONAL STANDARD INSTITUTE (ANSI)ANSI C63.16-1993 - American National

26、Standard Guidefor Electrostatic Discharge TestMethodologies and Criteria forElectronic Equipment(Application for copies should be addressed to the Instituteof Electrical and Electronics Engineers, Inc., 445 Hoes Lane,P.O. Box 1331, Piscataway, NJ 08855-1331.)AMERICAN SOCIETY FOR TESTING AND NATERIAL

27、S (ASTM)F 1166 Human Engineering Design fOrManned Systems, EquipmentFacilities(Application for copies should be addressed to theSociety for Testing and Materials, 1916 Race Street,Philadelphia, PA 19103.)ELECTROSTATIC DISCHIUtGE (ESD) ASSOCIATIONandAmericanEos/EsD-s5.l -ESD-S5.2 -ESD-S5.3 -EOS/ESD A

28、ssociation Standard for ESDSensitivity Testing, Human Body Model(HBM) - Component LevelESD Association Standard for ESDSensitivity Testing, Machine Model (MM)- Component LevelESD Association Standard for ESDSensitivity Testing, Charged DeviceModel (CDM) - Component Level(Application for copies shoul

29、d be addressed to the ESDAssociation, Inc., 7902 Turin Road, Suite 4, Rome, NY 13440-2069. )ELECTRONIC INDUSTRIES ASSOCIATION (EIA)RS471 - Symbol and Label for ElectrostaticSensitive Devices.(Application for copies should be addressed to theElectronic Industries Association, 2500 Wilson Boulevard,Ar

30、lington, VA 22201-3834.)I . . .3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD1686CINSTITUTE OF ELECTRIW AND ELECTRONICS ENGINEERS (IEEE)IEEE STD c62.38-1994 - IEEE Guide on ESD: ESDWithstand CapabilityEvaluation Methods (forElectronic Equip

31、mentSubassemblies)(Application for coPies should be addressed to the Instituteof Electrical and Electronics Engineers, Inc., 445 Hoes Lane,P.O. Box 1331, Piscataway, NJ 08855-1331.)INTERNATIONAL ELECTROTECHNICAL CONMISSION (IEC)IEC 801-2 - (First Edition, 1984) ElectromagneticCompatibility for Indus

32、trial ProcessMeasurement and Control Equipment, Part2: Electrostatic Discharge RequirementsIEC 801-2 - (Second Edition, 1991-04)Electromagnetic Compatibility forIndustrial Process Measurement andControl Equipment, Part 2:Electrostatic Discharge Requirements(Application for copies should be addressed

33、 to the ?unericanNational Standard Institute, 1430 Broadway, New York, NY 10018.)RELIABILITY ANALYSIS CENTER C)VZAP-95 - Electrostatic Discharge SusceptibilityData 1995(Application for copies should be addressed to theReliability Analysis Center, P.O. Box 4700, Rome, NY 13442-4700.)(Non-Government s

34、tandards and other publications arenormally available from the organizations that prepare ordistribute the documents. These documents also may be availablein or through libraries or other informational services.)2.4 Order of precedence. In the event of a conflictbetween the text of this document and

35、 the references citedherein, the text of this document takes precedence. Nothing inthis document, however, supersedes applicable laws andregulations unless a specific exemption has been obtained. .41:Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I1

36、 . .MIL-STD-1686C3. DEFINITIONS3.1 The definitions of terms not defined herein shall be inaccordance with MIL-HDBK-263.4. GENERAL REQUIREMENTS4.1 General. Contractors shall establish, implement, anddocument the ESD control program in accordance with therequirements of this standard. Contractors shal

37、l also apply theESD control program requirements (see 5.1.1) to subcontractors,suppliers, and vendors to provide continuous protection for ESDSparts, assemblies and equipment. Detailed guidance forestablishing, implementing, documenting, and auditing theelements of an ESD control program is provided

38、 in MIL-HDBK-263.4.1.1 Tailoring of this standard. This standard, orportions thereof, may not apply to all acquisitions orapplications. The contractor shall tailor the ESD controlprogram for the acquisition by selecting the applicable elementsof figure 1. The reference numbers in figure 1 are includ

39、ed forready reference to the appropriate sections of this standard.Figure 1 cannot, and does not take precedence Over contractual.delivery order or this standards requirements. Tailoring issubject to approval by the acquiring activity.5. DETAILED REQUIREMENTS5.1 ESD control program plan. The contrac

40、tor shall preparean ESD control program plan that addresses each of the elementsof the ESD control program shown in the tailoring flow chartdepicted in figure 1. The ESD control program plan is theprincipal document for designing, implementing, and auditing theESD control program. The goal is a full

41、y implemented andintegrated ESD control program that conforms to the qUalitysystem requirements.5.1.1 Subcontractor control. The contractor shall ensurethat subcontractors, suppliers and vendors have established andimplemented an ESD control program in accordance with therequirements of this standar

42、d. Tailoring of this standard forsubcontractors, suppliers and vendors shall be the responsibilityof the prime contractor (see 4.1.1) .5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. .MIL-STD-16E6C- - . . . . . . - - -. :.-.I- -.-.-.-.-:II-i- - .

43、. . . . . . . . . - -6.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1686C5.2 Classification of ESDS parts, assemblies and equipment.ESDS classification data shall be used to ensure that the ESDcontrol program (see 5.1), design hardening (s

44、ee 5.2.2),protected areas (see 5.3), and handling procedures (see 5.4)provide the requisite levels of ESD protection in accordance withthe requirements of thts standard. 11 characterization of theESD susceptibility of a part is accomplished by classification tothree defined models: the Human Body Mo

45、del (HBM), Machine Model(MM), and Charged Device Model (CDM). The HBM, MM, and CDMsensitivity classification of parts shall be in accordance withtables I and II. The HBM, MM, and CDM voltage levels do notcorrelate with each other.TABLE I. Classes of ESDS parts.ESD MODEL ESD CIX3S (VOLTAGERANGE )H13F

46、l 1 (OV-1,999V)2 (2,000V-3,999V)3 (4,000V-15,999V)MM Ml (Ov-loov)M2 (101V-2OOV)M3 (201V=400V)M4 (401V-800V)M5 ( 800v)CDM cl (OV-124V)C2 (125V-249V)C3 (250V-499V)C4 (500V-999V)C5 (l,ooov-l,499v)C6 (1,500V-2,999V)C7 ( 3,000V)NOTE: The above Classes may be dividedinto subclasses.Provided by IHSNot for

47、ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-srD-1686cTASLE II. ESD test standards/methods forclassification of ESDS parts.EsD MODEL ESD TEST STANDARD/METHOD I1- CDt4 I ESD-S5.3 15.2.1 Part ESD sensitivity classes and classification.5.2.1.1 HSM sensitivity classific

48、ation. The principalsource of ESD damage is the han body, as modeled by the standards. HBM ESD sensitivity classification of parts shall bedetermined as follows:(a) At the discretion of the contractor, all partsshall be considered as HBM ESD sensitive. In this case, allparts may be classified as falling ”inthe HSM Class 1-3 voltageranges and included in the ESD control program. If thecontractor has definitive data for the specific Part (c VW-95data, Qualified Products List (QPL), Qualified Manufacturer List(QML), or manufacturers data sheets), indicating it is notwithin HBM Cla