NAVY MIL-G-85536 (1)-1987 GUN SYSTEM 25-MM AIRCRAFT A A49E-10《 A A49E-1025-MM飞机火炮系统》.pdf

《NAVY MIL-G-85536 (1)-1987 GUN SYSTEM 25-MM AIRCRAFT A A49E-10《 A A49E-1025-MM飞机火炮系统》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-G-85536 (1)-1987 GUN SYSTEM 25-MM AIRCRAFT A A49E-10《 A A49E-1025-MM飞机火炮系统》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-G-85536(AS) AMENDMENT 1 24 March i987 MILITARY SPECIFICATION GUN SYSTEM, 25-Mb1, AIRCRAFT A/A49E-10 This amendment forms a part of Military Specification MIL-G-85536(AS) dated 24 May 1984, and is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use

2、by all Departments and agencies of the Department of Defense. PAGE 2 . Paragraph 2.1.2, delete “1395AS104 Drive Unit, Pneumatic“ and substitute “1395AS1016 Drive Unit, Pneumatic“; and add “1395AS109 Drive Assembly Gun“ and 1395AS156 Shaft, Splined Crossover.“ PAGE 3 Paragraph 2.2, under the title, M

3、cDonnell Aircraft Company, add “758732803 Assembly-Nose Fairing, 25-mm Gun Pak.“ PAGE 4 Table I, delete “Pneumatic Drive Unit 1395AS104 and substitute “Pneumatic Drive Unit 1395AS1016.“ PAGE 6 Paragraph 3.2.1.6.2, line 2:delete “The limits specified in Figure 1“ and substitute “675 in-lbs.“ DISTRIBU

4、TION STATEMENT A. Approved for public release: distribution is unlimited. AMSC N/A Page 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-G-85536 (AS) AMENDMENT 1 f PAGE 7 Figure 1: delete PAGE 10 Paragraph 4.2, line 2, add ?Table III tests

5、may be performed without the Gun Pak Nose Fairing (Ref. P/N 75A732803) attached to the Gun Pak (Ref. P/N 75A732506). The Gun Drive Assembly (P/N 1395AS109) and Crossover Shaft (P/N 1395AS156)-may be substituted in Table III tests for data acquisition.? PAGE 11 Paragraph 4.2.3, line 6,delete 360F and

6、 substitute 16OoF, and following line 8 add ?If acceleration and firing rates are recorded below the limits of 3.2.1.2 then retest at 4OOOF. Minimum inlet air is required. PAGE 12 Paragraph 4.2.4, line 3)add ?If visual examination of the ammunition handling subsystem, 25m, Aircraft. CFK-11/49E-10 (1

7、395AS102) result in detection of up to and including five missing external retaining rings (MS16632-4025) from the linear linkless ammunition conveyor assemblies, they shall be replaced without retesting.? 1 Preparing Activity Navy-AS (Proj ect 1005-705 1 Page 2 of 2 o Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-