NAVY MIL-DTL-25427 2 B-2009 COUPLING HALF AIRCRAFT MOUNTING HYDRAULIC SELF-SEALING QUICK DISCONNECT《快速断开自密封液压飞机安装的半联轴器》.pdf

《NAVY MIL-DTL-25427 2 B-2009 COUPLING HALF AIRCRAFT MOUNTING HYDRAULIC SELF-SEALING QUICK DISCONNECT《快速断开自密封液压飞机安装的半联轴器》.pdf》由会员分享，可在线阅读，更多相关《NAVY MIL-DTL-25427 2 B-2009 COUPLING HALF AIRCRAFT MOUNTING HYDRAULIC SELF-SEALING QUICK DISCONNECT《快速断开自密封液压飞机安装的半联轴器》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、 MIL-DTL-25427/2 08 December 2009 DETAIL SPECIFICATION SHEET COUPLING HALF, AIRCRAFT MOUNTING, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein sh

2、all consist of this specification sheet and MIL-DTL-25427. FIGURE 1. Coupling half aircraft mounting dimensions and configuration. AMSC N/A FSC 4730 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-25427/2 2FIGURE 2. Type Qfitting e

3、nd per SAE-AS85421/2 style 2 standard beam seal. FIGURE 3. Type Xfitting end per SAE-AS85421/1 style 1 standard beam seal. FIGURE 4. Type Yfitting end per SAE-AS4395 style E standard flared. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-254

4、27/2 3FIGURE 5. Type Zfitting end per SAE-AS4396 style H bulkhead flared. TABLE I. Dimensions and design data. Thread T SAE-AS8879 class 3A Thread S (FED-STD-H28/2) Dash No. Tube OD SAE-AS85421/1 SAE-AS85421/2 SAE-AS4395 SAE-AS4396 Size Class 3A leads B (max) -4 0.250 0.4375-24UNJS 0.4375-20UNJF 0.9

5、375-20UN 10 0.608 -6 0.375 0.5625-20UNJS 0.5625-18UNJF 1.1250-18UN 8 0.742 -8 0.500 0.7188-20UNJS 0.7500-16UNJF 1.1250-18UN 8 0.742 -10 0.625 0.8438-18UNJS 0.875-14UNJF 1.6250-12UN 6 0.869 -12 0.750 1.0000-16UNJ 1.0625-12UNJ 1.6250-12UN 6 0.869 -16 1.000 1.2500-14UNJS 1.3125-12UNJ 1.8750-12UN 6 1.12

6、1 -20 1.250 1.5781-14UNJS 1.625-12UNJ 2.1250-12UN 8 0.936 -24 1.500 1.8438-14UNJS 1.875-12UNJ 2.3750-12UN 8 1.057 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-25427/2 4TABLE I. Dimensions and design data Continued. A (max) C (max) Dash No.

7、 Type Q Type X Type Y Type Z Type Q Type X Type Y Type Z -4 2.020 1.552 1.827 2187 0.991 0.523 0.798 1.158 -6 2.348 1.861 2.122 2.556 1.141 0.654 0.915 1.349 -8 2.415 1.874 2.223 2.739 1.208 0.667 1.016 1.532 -10 2.854 2.238 2.624 3.129 1.452 0.836 1.222 1.727 -12 2.950 2.278 2.730 3.315 1.548 0.876

8、 1.328 1.913 -16 3.198 2.522 2.973 3.511 1.566 0.850 1.301 1.839 -20 3.025 3.312 2.813 3.356 1.545 0.832 1.333 1.876 -24 3.295 2.497 3.038 3.472 1.688 0.890 1.431 1.865 TABLE I. Dimensions and design data Continued. D (max) Dash No Type Q Type X Type Y Type Z E F G -4 0.695 0.290 0.565 0.925 0.21 0.

9、56 0.80 -6 0.734 0.310 0.571 1.005 0.21 0.75 1.03 -8 0.770 0.323 0.672 1.188 0.21 0.75 1.03 -10 0.909 0.387 0.773 1.278 0.23 1.00 1.47 -12 1.005 0.427 0.879 1.464 0.23 1.00 1.47 -16 1.097 0.475 0.926 1.464 0.24 1.24 1.74 -20 1.091 0.472 0.973 1.516 0.24 1.50 1.99 -24 1.261 0.557 1.098 1.532 0.24 1.7

10、5 2.25 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-25427/2 5NOTES: 1. Dimensions are in inches, unless otherwise specified, tolerance decimals + 0.010. 2. Thread “S“ shall conform to FED-STD-H28/2. 3. Thread “T“ shall conform to SAE-AS887

11、9. 4. Break all sharp edges and remove all hanging burrs and slivers. 5. Serrated teeth of the lock spring assembly shall engage with the serrated teeth on the inner sleeve of MIL-DTL-25427/6 coupling nut to ensure positive locking. 6. For design feature purposes, this specification sheet takes prec

12、edence over the procurement document. 7. Referenced documents shall be of the issue in effect on date of contract award. 8. This aircraft bulkhead male coupling half shall mate and lock with female hose attaching coupling half when coupled. This aircraft bulkhead coupling half shall be interchangeab

13、le for the same size and pressure class regardless of manufacturers. 9. Connecting and disconnecting of coupling torque shall be in accordance with the procurement specification. REQUIREMENTS: 1. Material-for materials requirements, see procurement specification MIL-DTL-25427. 2. Finish-for finish r

14、equirements, see procurement specification MIL-DTL-25427. 3. Pressure class-for pressure class requirements, see procurement specification MIL-DTL-25427. 4. Aluminum alloy parts. The surface of the aluminum alloy parts, after anodizing, sealing, and surface treatment shall be free from pits, powder

15、coatings, discontinuities such as scratches or breaks and shall be uniform in appearance. 5. External threads. External threads shall be produced by die cutting or machining by the single point method. 6. Marking. Marking shall consist of the complete specification sheet part number and manufacturer

16、s name, trademark, or CAGE code and shall be impression stamped or laser etched and shall be protected from corrosion. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-25427/2 67. Flange. In accordance with MIL-DTL-25427/7. 8. Interchangeabili

17、ty. This coupling half shall be interchangeable having the same tube size and pressure class. This coupling half configuration and dimensions are known to be similar to Parker coupling half 44106, Eaton coupling half 155S/145S, and Hydraulic International coupling half MP/MPB. Suppliers seeking to b

18、e on QPL-25427 are responsible for interchangeability and shall perform the manual operation test to ensure their manufactured coupling half is interchangeable with other suppliers coupling half and vice versa. 9. Operation. Connection and disconnection of this bulkhead coupling half with MIL-DTL-25

19、427/3 hose attaching coupling half assembly or MIL-DTL-25427/4 coupling cap shall be easily accomplished by using one hand with no tool required. This bulkhead coupling half shall function as required in MIL-DTL-25427 when connected to MIL-DTL-25427/3 hose attaching coupling half or MIL-DTL-25427/4

20、coupling cap. When mating with MIL-DTL-25427/3 hose attaching coupling half, the coupled coupling assembly may have a partially coupled and unlocked position that shall remain stable and shall permit fluid flow. 10. Test requirements. The coupling half sample shall be performed in accordance with ap

21、plicable test requirements of MIL-DTL-25427. Suppliers seeking qualification of new couplings are responsible for interchangeability of their coupling half with the existing qualified coupling half or couplings. The qualifying activity will perform the manual operation test of the coupling half prov

22、ided by manufacturers whenever necessary to ensure interchangeability and leakage within the allowable limit. 11. Part or identification number (PIN). The PIN consists of the letter M, the specification sheet number, a dash number from table I, material code, end fitting type, and pressure class. M

23、25427/2 -XX X X -XXXX M Prefix (M=military) Dash No. (see table I herein) Type fitting end Q = beam seal (AS85421/2 style 2) X = beam seal (AS85421/1 style 1) Y = flared standard (AS4395 style E) Z = flared bulkhead (AS4396 style H) Pressure class (3000 = 3000 PSI) (see 1.2 of MIL-DTL-25427) Specifi

24、cation sheet number Material code (see table I of MIL-DTL-25427) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-25427/2 7Example: M25427/2-8CZ3000 represents .5 OD tube carbon steel coupling half, aircraft mounting, hydraulic self sealing, f

25、lared bulkhead fitting end, 3000 PSI operating pressure. 12. Intended use. These coupling halves are mounted on aircraft known as bulkhead halves used as assembly when connected with ground coupling halves for delivery of hydraulic fluid from ground cart to aircraft operating at 1000, 3000, and 5000

26、 PSI with Type II system hydraulic fluid having temperature range -65 F to +275 F. These coupling halves are intended for use in military aircraft and aerospace vehicles where the bulkhead mounting half and protective cap are a part of the aircraft and the hose attaching half and protective plug are

27、 a part of the ground support equipment. CONCLUDING MATERIAL Custodians: Preparing activity: Army-AV Navy-AS Navy-AS Air Force-99 (Project 4730-2008-125) Review activities: Army-AT, MI Navy-SA Air Force-11, 71 DLA-CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-