NAVISTAR CEMS GT INDEX-2015 Index of GT Test Methods.pdf

《NAVISTAR CEMS GT INDEX-2015 Index of GT Test Methods.pdf》由会员分享，可在线阅读，更多相关《NAVISTAR CEMS GT INDEX-2015 Index of GT Test Methods.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 This document is restricted and may not be sent outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. OCTOBER 2015 Page 1 of 2 NAVISTAR, INC. CEMS (CORPORATE ENGINEERING MATERIAL SPEC

2、IFICATION) NUMBER: CEMS GT Index TITLE: Index of GT Test Methods CURRENT ISSUE DATE: Oct. 2015 WRITTEN/REVIEWED BY: Materials Engineering APPROVED BY: Materials Engineering SUPERSEDES ISSUE OF: Aug 2015 PRINTED COPIES OF THIS DOCUMENT MUST BE VERIFIED FOR CURRENT REVISION This specification may invo

3、lve hazardous materials, equipment, and procedures. This specification does not purport to address all of the safety issues associated with its use. The user is responsible to consult appropriate safety and health practices and to determine the applicability of regulatory limits prior to use. Change

4、 Notice: Made Void GT-24. See MPAPS GT-24 for replacement method Index of GT Test Methods Spec NUMBER TITLE DATE Author CEMS-GT-INDEX Index of GT Test Methods October 2015 Materials Engineering CEMS-GT-1A Nonvolatile Content of Paint by Weight VOID August 2015 Materials Engineering CEMS-GT-1B Nonvol

5、atile Content of Paint by Volume VOID August 2015 Materials Engineering CEMS-GT-2A & 2B Hiding Power of Paint (Wet & Dry Film) VOID August 2015 Materials Engineering CEMS-GT-3B Storage Stability of Paint VOID August 2015 Materials Engineering CEMS-GT-3C Dip Paint Stability VOID August 2015 Materials

6、 Engineering CEMS-GT-3F Storage Stability of Paint in Pressurized Cans VOID August 2015 Materials Engineering CEMS-GT-4B Color Stability of Paint VOID August 2015 Materials Engineering CEMS-GT-4C Toughness of Paint VOID August 2015 Materials Engineering CEMS-GT-4D Hardness of Paint VOID August 2015

7、Materials Engineering CEMS-GT-4E Taping and Recoating Properties of Paint VOID August 2015 Materials Engineering CEMS-GT-4F Wrinkling Resistance of Paint VOID August 2015 Materials Engineering CEMS-GT-4G Curing Properties At Three Months VOID August 2015 Materials Engineering CEMS-GT-4H Properties o

8、f Catalyzed Paint VOID August 2015 Materials Engineering CEMS-GT-4J Bleeding of Paint VOID August 2015 Materials Engineering CEMS-GT-4K Intercoat Compatibility VOID August 2015 Materials Engineering CEMS-GT-5A Adhesion of Paint VOID August 2015 Materials Engineering CEMS-GT-5B Intercoat Adhesion of

9、Paint VOID August 2015 Materials Engineering CEMS-GT-5C Accelerated Adhesion of Paint VOID August 2015 Materials Engineering CEMS-GT-6A Holdout of Paint VOID August 2015 Materials Engineering CEMS-GT-6B Initial Gloss of Paint VOID August 2015 Materials Engineering CEMS-GT-6D Holdout of Paint (Flash-

10、Dry) VOID August 2015 Materials Engineering CEMS-GT-6E Distinctness of Image (D.O.I.) VOID August 2015 Materials Engineering CEMS-GT-7B Sanding Test for Paint VOID August 2015 Materials Engineering CEMS-GT-7D Corrosion Tests to Evaluate Paint or Painted Parts VOID August 2015 Materials Engineering C

11、EMS-GT-7E Humidity Test for Paint VOID August 2015 Materials Engineering CEMS-GT-7F South Florida Exposure Test for Paint VOID August 2015 Materials Engineering CEMS-GT-7G Distilled Water Immersion Test for Paint VOID August 2015 Materials Engineering CEMS-GT-7H Xylene Mineral Spirits Immersion Test

12、 for Paint VOID August 2015 Materials Engineering CEMS-GT-7J Antifreeze Immersion Test for Paint VOID August 2015 Materials Engineering CEMS-GT-7K Engine Oil Immersion Test for Paint VOID August 2015 Materials Engineering CEMS-GT-8 Heat Resistant Properties of Paint VOID August 2015 Materials Engine

13、ering CEMS-GT-9A Machinability of Painted Surface VOID August 2015 Materials Engineering CEMS-GT-9B Solvent Resistance of Paint VOID August 2015 Materials Engineering NUMBER: CEMS GT INDEX TITLE Index of GT Test Methods CURRENT ISSUE DATE: OCTOBER 2015 This document is restricted and may not be sent

14、 outside Navistar, Inc. or reproduced without permission from Corporate Technical Standards. Suppliers are required to assume all patent liability. 2015 by Navistar, Inc. OCTOBER 2015 Page 2 of 2 Index of GT Test Methods (continued) Spec NUMBER TITLE DATE Author CEMS-GT-10 Heated Paint Stability Tes

15、t VOID August 2015 Materials Engineering CEMS-GT-11 Cracking Resistance of Paint VOID August 2015 Materials Engineering CEMS-GT-12 Mar Resistance of Paint VOID August 2015 Materials Engineering CEMS-GT-13 Panel Preparation VOID August 2015 Materials Engineering CEMS-GT-14A Xylol Rubbing Test VOID Au

16、gust 2015 Materials Engineering CEMS-GT-14B Acid Spot Test VOID August 2015 Materials Engineering CEMS-GT-14C Cold Crack Test VOID August 2015 Materials Engineering CEMS-GT-15 Ferroxyl Test VOID August 2015 Materials Engineering CEMS-GT-16 Chromic Acid Compatibility Test VOID August 2015 Materials E

17、ngineering CEMS-GT-17 Oil Compatibility of Paint VOID August 2015 Materials Engineering CEMS-GT-18 Dry Film Conductivity of A Primer VOID August 2015 Materials Engineering CEMS-GT-19 Early Water Resistance of Sealers and Paints VOID August 2015 Materials Engineering CEMS-GT-20 Surface Sealing VOID A

18、ugust 2015 Materials Engineering CEMS-GT-21 Curing Properties on Receipt - Air Drying VOID August 2015 Materials Engineering CEMS-GT-22 Curing Properties on Receipt - Forced Dry or Baking VOID August 2015 Materials Engineering CEMS-GT-23 Determination of Phosphate Coating Weight on Ferrous Substrate

19、 VOID August 2015 Materials Engineering CEMS-GT-24 Phosphate System Compatibility VOID October 2015 Materials Engineering CEMS-GT-25 Chip Resistance of Paint VOID August 2015 Materials Engineering CEMS-GT-26 Glycol Compatibility of Paint VOID August 2015 Materials Engineering CEMS-GT-27 Application

20、Heat Resistance VOID August 2015 Materials Engineering CEMS-GT-28 Maximum Allowable Paint Chipping Damage VOID August 2015 Materials Engineering CEMS-GT-29 Orange Peel-Reflected Light Intensity Measurement VOID August 2015 Materials Engineering CEMS-GT-30 Chipping and Salt Spray Resistance VOID Augu

21、st 2015 Materials Engineering CEMS-GT-31 Accelerated Weathering of Non-metallic Materials VOID February 2010 Materials Engineering CEMS-GT-32 Color Match Evaluation and Acceptance Criteria October 2011 Materials Engineering OBSOLETE GT Test Methods Spec NUMBER TITLE Replaced by: Date of Deletion GT-

22、3A Dilution Stability of Paint FSTM 4203.1 1973 GT-3D Brushing Properties of Paint FSTM 4321.1 1973 GT-3E Spraying Properties of Paint FSTM 4331.1 1973 GT-4A Curing Properties on Receipt ASTM D 1640 1973 GT-6C Color FSTM 4250 1973 GT-7A Gravelometer Test for Paint SAE J400 1968 GT-7C Immersion CEMS GT-7G, 7H, 7J 1968