NA to BS EN 1995-1-2-2004 UK National Annex to Eurocode 5 Design of timber structures – Part 1-2 General – Structural fire design《欧洲法规5的英国国家附录 木结构设计 第1-2部分 总则 结构防火设计》.pdf

《NA to BS EN 1995-1-2-2004 UK National Annex to Eurocode 5 Design of timber structures – Part 1-2 General – Structural fire design《欧洲法规5的英国国家附录 木结构设计 第1-2部分 总则 结构防火设计》.pdf》由会员分享，可在线阅读，更多相关《NA to BS EN 1995-1-2-2004 UK National Annex to Eurocode 5 Design of timber structures – Part 1-2 General – Structural fire design《欧洲法规5的英国国家附录 木结构设计 第1-2部分 总则 结构防火设计》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、NA to BS EN 1995-1-2:2004UK National Annex to Eurocode 5: Design of timber structures Part 1-2: General Structural fire designICS 13.220.50; 91.010.30; 91.080.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWNATIONAL ANNEXLicensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00

2、:00 2007, Uncontrolled Copy, (c) BSIPublishing and copyright informationThe BSI copyright notice displayed in this document indicates when the document was last issued. BSI 2006ISBN 0 580 49350 4The following BSI references relate to the work on this standard:Committee reference B/525/5Draft for com

3、ment 05/30134000Publication historyFirst edition, October 2006Amendments issued since publicationAmd. no. Date Text affectedNA to BS EN 1995-1-2:2004Licensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BSI 2006 iNA to BS EN 1995-1-2:2004ContentsIntroduction 1NA

4、.1 Scope 1NA.2 Nationally Determined Parameters 1NA.3 Guidance on using informative annexes 2NA.4 Reference to non-contradictory complementary information 3Bibliography 4Summary of pagesThis document comprises a front cover, an inside front cover, pages i and ii, pages 1 to 4, an inside back cover a

5、nd a back cover.Licensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSINA to BS EN 1995-1-2:2004ii BSI 2006 This page deliberately left blankLicensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BSI 2006 1NA to BS EN 1995-1-2:

6、2004National Annex NA (informative) to BS EN 1995-1-2:2004, Eurocode 5: Design of timber structures Part 1-2: General Structural fire designIntroductionThis National Annex has been prepared by BSI Subcommittee, B/525/5, Structural use of timber. In the UK it is to be used in conjunction with BS EN 1

7、995-1-2 for the structural fire design of timber structures, together with BS EN 1995-1-1, BS EN 1990 and BS EN 1991 and their National Annexes.NA.1 ScopeThis National Annex gives:a) the UK decisions for the Nationally Determined Parameters described in the following subclauses of BS EN 1995-1-2:200

8、4: 2.1.3(2) 2.3(1)P 2.3(2)P 2.4.2(3) 4.2.1(1)b) the UK decisions on the status of BS EN 1995-1-2:2004 informative annexes;c) reference to non-contradictory complementary information.NA.2 Nationally Determined Parameters NA.2.1 Maximum temperature rise for separating function in parametric fire expos

9、ure BS EN 1995-1-2:2004, 2.1.3(2)During the decay phase the temperature rise of the unexposed side of a separating construction should be limited to the following:a) average temperature rise (1) of 200 K;b) maximum temperature rise (2) of 240 K.NA.2.2 Partial factor for material properties in fire B

10、S EN 1995-1-2:2004, 2.3(1)PThe partial factor for material properties in fire, M,fi, should be taken as 1,0.Licensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSINA to BS EN 1995-1-2:20042 BSI 2006NA.2.3 Partial factor for mechanical resistance of connections in

11、a fire situation BS EN 1995-1-2:2004, 2.3(2)PThe partial factor for mechanical resistance of connections in a fire situation, M,fi, should be taken as 1,0.NA.2.4 Reduction factor fifor combinations of actions BS EN 1995-1-2:2004, 2.4.2(3)The reduction factor for combinations of actions, fi, should b

12、e evaluated using expression 2.9 of BS EN 1995-1-2, but is not permitted to have a value less than 0,4.NA.2.5 Procedure for determining cross-sectional properties BS EN 1995-1-2:2004, 4.2.1(1)The cross-sectional properties in fire should be determined using the reduced cross-section method of 4.2.2.

13、NA.3 Guidance on using informative annexesNA.3.1 Parametric fire exposure BS EN 1995-1-2:2004, Annex ABS EN 1995-1-2:2004, Annex A should not be used.NA.3.2 Advanced calculation methods BS EN 1995-1-2:2004, Annex BBS EN 1995-1-2:2004, Annex B should not be used.NA.3.3 Load-bearing floor joists and w

14、all studs in assemblies whose cavities are completely filled with insulation BS EN 1995-1-2:2004, Annex CBS EN 1995-1-2:2004, Annex C may be used.NA.3.4 Charring of members in wall and floor assemblies with void cavities BS EN 1995-1-2:2004, Annex DBS EN 1995-1-2:2004, Annex D should not be used.Lic

15、ensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI BSI 2006 3NA to BS EN 1995-1-2:2004NA.3.5 Analysis of the separating function of wall and floor assemblies BS EN 1995-1-2:2004, Annex EBS EN 1995-1-2:2004, Annex E should not be used.NA.3.6 Guidance for users of

16、 EN 1995-1-2 BS EN 1995-1-2:2004, Annex FBS EN 1995-1-2:2004, Annex F may be used.NA.4 Reference to non-contradictory complementary information Material from BS 5268, Structural use of timberPD 6693, Complementary information for use with Eurocode 5, BSI, London. (Publication date to be announced.)L

17、icensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSINA to BS EN 1995-1-2:20044 BSI 2006BibliographyStandards publicationsFor dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am

18、endments) applies.BS 5268, Structural use of timberPD 6693, Complementary information for use with Eurocode 5BS EN 1990:2002, Eurocode Basis of structural design.BS EN 1991 (all parts), Eurocode 1 Actions on structures.BS EN 1995-1-1:2004, Eurocode 5 Design of timber structures Part 1-1: General Com

19、mon rules and rules for buildings.Licensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSIThis page deliberately left blankNA to BS EN 1995-1-2:2004Licensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBSI British Standards Inst

20、itutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards shou

21、ld make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committe

22、e responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders f

23、or all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is B

24、SI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Ser

25、vice. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and

26、 receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Onlin

27、e can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyri

28、ght, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI.This does not preclude the free use, in the course of implementing the st

29、andard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright & Licensing Manager.Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553.Email: copyrightbsi-.NA to BS EN 1995-1-2:2004389 Chiswick High RoadLondonW4 4ALLicensed Copy: Wang Bin, na, Fri Feb 02 07:18:45 GMT+00:00 2007, Uncontrolled Copy, (c) BSI