MSS SP-109 ERTA-2012 Weld-Fabricated Copper Solder-Joint Pressure Fittings.pdf

《MSS SP-109 ERTA-2012 Weld-Fabricated Copper Solder-Joint Pressure Fittings.pdf》由会员分享，可在线阅读，更多相关《MSS SP-109 ERTA-2012 Weld-Fabricated Copper Solder-Joint Pressure Fittings.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 127 Park Street, NE Vienna, VA 22180-4602 703-281-6613 FAX 703-281-6671 www.mss-hq.org e-mail:infomss-hq.org EXECUTIVE DIRECTOR: Robert F. ONeill ERRATA SHEET FOR MSS SP-109-2012 and SP-109-1997 (R 2006) July 9, 2012 This “normative” errata correction applies only to MSS SP-109-2012 (current) and S

2、P-109-1997 (R 2006) editions, involving Weld-Fabricated Copper Solder-Joint Pressure Fittings. Note the following correction: 1. Page 5, Table 3 (Dimensions of Solder-Joint Ends), Headings/Sub-Headings: Male Ends/Outside Diameter A/Max. The dimension should indicate “1.127” instead of the existing “

3、10127”. This Errata Sheet has been inserted into the Standard Practice. For those who obtained the Standard Practice before the July 9 publication date indicated above, please include this Errata Sheet with your current Standard Practice. Future printing of the Standard Practice will include this corrected information. PRESIDENT: T.J. Hannafin KITZ Corporation of America VICE PRESIDENTS: G.M. Johnson United Valve M.A. Clark NIBCO, Inc. TREASURER: J. Barker Dezurik APCO Manufacturers Standardization Society of the Valve And Fittings Industry, Inc. MSS