ITU-T Q 822-1994 Stage 1 Stage 2 and Stage 3 Description for the Q3 Interface - Performance Management - Specifications of Signalling System No 7 (Study Group 11) 54 pp《Q3接口的一级、二级和.pdf

《ITU-T Q 822-1994 Stage 1 Stage 2 and Stage 3 Description for the Q3 Interface - Performance Management - Specifications of Signalling System No 7 (Study Group 11) 54 pp《Q3接口的一级、二级和.pdf》由会员分享，可在线阅读，更多相关《ITU-T Q 822-1994 Stage 1 Stage 2 and Stage 3 Description for the Q3 Interface - Performance Management - Specifications of Signalling System No 7 (Study Group 11) 54 pp《Q3接口的一级、二级和.pdf（54页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL TELECOMMUNICATION UNION ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU SP ECI FI CATIONS O F SIGNALLING SYSTEM N0.7 Q.822 (04/94) STAGE 1, STAGE 2 AND STAGE 3 PERFORMANCE MANAGEMENT DESCRIPTION FOR THE Q3 INTERFACE - ITU-T Recommendation Q.822 (Previously “CCITT Recommendation”)

2、 COPYRIGHT International Telecommunications Union/ITU TelecommunicationsLicensed by Information Handling ServicesFOREWORD The ITU-T (Telecommunication Standardization Sector) is a permanent organ of the International Telecommunication Union (ITU). The ITU-T is responsible for studying technical, ope

3、rating and tariff questions and issuing Recommen- dations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in th

4、eir turn, produce Recommendations on these topics. The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1 (Helsinki, March 1-12, 1993). ITU-T Recommendation Q.822 was prepared by ITU-T Study Group 11 (1993-1996) and was approved und

5、er the WTSC Resolution No. 1 procedure on the 7th of April 1994. NOTE In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. O ITU 1994 All rights reserved. No part of this publication may

6、 be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU. COPYRIGHT International Telecommunications Union/ITU TelecommunicationsLicensed by Information Handling Services ITU-T RECMN*Q.822 94 E

7、4862593 0593352 642 CONTENTS 1 Scope. purpose. and field of application 1.2 Purpose . 1.1 Scope 1.3 Field of application . 2 References 2.1 Recommendations referred to in this Recommendation . Terms and definitions, abbreviations . 3.1 Terms and definitions . 3.2 Abbreviations 3 4 Performance manage

8、ment 4.1 Performance management functions . Performance management data collection functions . Performance management data storage functions . 4 .i . 1 4.1.2 4 .i . 3 4 .i . 4 Performance management thresholding functions Performance management data reporting functions 4.2 Performance management mod

9、el 4.3 Performance management information . 4.3.1 Managed object classes . 4.3.1.1 Current data . 4.3.1.2 History data . 4.3.1.3 Threshold data . 4.3.2 Package definitions . 4.3.2.1 4.3.2.2 4.3.2.3 4.3.2.4 4.3.2.5 4.3.2.6 4.3.2.7 4.3.2.8 4.3.2.9 4.3.2.10 4.3.2.1 1 4.3.2.12 4.3.2. i3 4.3.2.14 4.3.2.1

10、5 Counter threshold list package Gauge threshold list package History data measurement list package . History data suspect interval flag package History retention package . Measurement list package . Number of suppressed intervals package Observed managed object package . Scheduled performance monit

11、oring report package . Threshold package Threshold verification package . Zero suppression package . Filter suppression package Maximum number of suppressed intervals package . Object delete notification package 4.3.3 Attribute definitions 4.3.3.1 Counter threshold attribute list 4.3.3.2 Elapsed tim

12、e 4.3.3.3 4.3.3.4 History data Id . 4.3.3.5 History retention . Gauge threshold attribute list Recommendation Q.822 (0494) Page 1 1 1 1 1 1 2 2 3 4 4 4 4 5 5 5 7 7 9 10 10 11 11 11 11 12 12 12 12 13 13 13 13 14 14 15 16 16 16 16 16 17 17 1 COPYRIGHT International Telecommunications Union/ITU Telecom

13、municationsLicensed by Information Handling ServicesITU-T . . 4.3.3.6 Maximum suppressed intervals . 4.3.3.7 Measurement list . 4.3.3.8 Monitored entity types 4.3.3.9 Number of suppressed intervals 4.3.3.10 Observed object class 4.3.3.1 1 Report all attributes . 4.3.3.12 Period end time . 4.3.3.13 S

14、uppress additional thresholds 4.3.3.14 Suspect interval flag 4.3.3.15 ThresholddataId 4.3.3.16 Threshold data instance . 4.3.4 Name binding definitions 4.3.5 Abstract syntax productions 4.3.6 Support objects from other CCIIT Recommendations 4.3.6.1 4.3.6.2 Support objects from definition of manageme

15、nt information . 4.3.7 Performance management control . 4.4 Performance management service definition 4.5 Functional unit definitions 5 Protocol 5.1 Abstract syntax . 5.1.1 Managed objects . 5.1.1.1 Referenced managed objects . 5.1.1.2 Defined managed objects 5.1.2 Attributes . 5.1.2.1 5.1.2.2 Attri

16、butes imported from the summarization function 5.1.2.3 5.1.2.4 Attributes defined in this Recommendation 5.1.3 Notifications 5.1.3.1 Referenced notifications . 5.2 Negotiation of functional units . Relationship with other Recommendations Support objects from the summarization function Attributes imp

17、orted from the metric objects and attributes function Attributes imported from definition of management information . 6 7 7.3 Conformance 7.1 7.1.1 Static conformance General conformance class requirements . 7.1.2 Dynamic conformance Dependent conformance class requirements . 7.2 7.2.1 Static confor

18、mance 7.2.2 Dynamic conformance Conformance to support managed object definitions . Annex A . Performance monitoring parameters . A.l Abbreviations A.2 Performance monitoring parameters attribute templates A.2.1 Alarm indication signal second (AISS) A.2.2 Alarm indication signal second far end (AISS

19、FE) A.2.3 Controlled slip second (CSS) A.2.4 Controlled slip second far end (CSSFE) . A.2.5 Code Violation (CV) . A.2.6 Code violation, CP-bit parity (CVCP) A.2.7 Code violation, CP-bit parity far end (CVCPFE) . A.2.8 Code violation, cyclic redundancy check (CVCRC) A.2.9 Code violation, cyclic redun

20、dancy check far end (CVCRCFE) A.2.10 Code violation far end (CVFE) . A.2.11 Code violation, P-bit (CVP) A.2.12 Errored second (ES) Page 17 18 18 18 18 18 19 19 19 20 20 20 21 22 22 22 22 23 23 23 23 23 23 23 23 23 24 24 24 24 24 25 25 25 25 25 26 26 26 26 26 27 27 28 28 28 29 29 29 29 29 29 30 30 30

21、 30 II Recommendation Q.822 (04/94) COPYRIGHT International Telecommunications Union/ITU TelecommunicationsLicensed by Information Handling ServicesA.2. A.2. A.2. A.2. A.2. A.2. A.2.19 A.2.20 A.2.21 A.2.22 A.2.23 A.2.24 A.2.25 A.2.26 A.2.27 A.2.28 A.2.29 A.2.30 A.2.3 1 A.2.32 A.2.33 A.2.34 A.2.35 A.

22、2.36 A.2.37 A.2.38 A.2.39 A.2.40 A.2.41 A.2.42 A.2.43 A.2.44 A.2.45 A.2.46 ITU-T RECMN*Q-22 94 I 4862593 0593354 415 I Errored second. type A (ESA) . Errored second, type A, CP-bit (ESACP) . Errored second, type A . CP-bit far end (ESACPFE) Errored second, type A, CRC (ESACRC) Errored second, type A

23、, CRC far end (ESACRCFE) Errored second, type A, far end (ESAFE) Errored second, type A, P-bit (ESAP) Errored second, type B (ESB) . Errored second, type B, CP-bit (ESBCP) . Errored second. type B. CP-bit far end (ESBCPFE) . Errored second, type B, CRC (ESBCRC) . Errored second, type B, CRC far end

24、(ESBCRCFE) Errored second . type 3, far end (ESBFE) . Errored second, type B, P-bit (ESBP) . Errored second, CP-bit parity far end ( Errored second, cyclic redundancy check far end (ESCRCFE) . Errored second far end (ESFE) . Errored second, P-bit (ESP) . Loss of signal second (LOSS) . Protection swi

25、tching count (PSC) . Protection switching duration (PSD) SEF/AIS second, far end (SASE) . Severely errored second (SES) . Severely errored second, CP-bit (SESCP) Severely errored second. CRC (SESCRC) Severely errored second far end (SESFE) . Severely errored second-path (SESP) . Unavailable second (

26、UAS) . Unavailable second far end (UASFE) . Errored second, CP-bit parity (ESCP) Errored second. cyclic redundancy check (ESCRC) . . SEF/AIS severely errored framing alarm indication signal second (SAS) . Severely errored second, CP-bit far end (SESCPFE) . Severely errored second, CRC far end (SESCR

27、CFE) Annex B . Performance management information model overview B . 1 Introduction B . 2 Overview of the performance management information model . B.2.1 Collection of current PM data . B.2.2 History records B.2.3 Scheduled report . B.2.4 Setting and reporting of PM thresholds B.2.4.1 Thresholds ap

28、plying to a single managed object B.2.4.2 Historical retention of PM data . Scheduled summary or statistical reports Annex C - PM model alternative C . 1 Performance management model C.2 Performance management information C.2.1 Difference scanner C.2.2 Performance data component C.3 Attribute defini

29、tions (2.3.1 Difference report list . C.4 Name binding definitions . Guidelines for the use of the model Thresholds applying to multiple managed objects B.2.5 B.2.6 C.5 Recommendation Q.822 (W94) Page 30 31 31 31 31 31 32 32 32 32 32 33 33 33 33 33 34 34 34 34 34 35 35 35 35 35 36 36 36 36 36 37 37

30、37 37 37 37 38 38 39 39 39 40 42 42 44 44 44 44 45 46 46 46 46 iii COPYRIGHT International Telecommunications Union/ITU TelecommunicationsLicensed by Information Handling Services ITU-T RECMN*Q.822 94 4862593 0593355 351 ABSTRACT This Recommendation provides a Stage 1, Stage 2 and Stage 3 Descriptio

31、n for the Q3 Interface in a Telecommunication Management Network. Its focus is the parameter collection and storage, and the thresholding aspects of Performance Management. Included in this Description are specifications of the functions, management information, services, functional units, and proto

32、cols related to Performance Management. Significant re-use of OS1 system Management specifications is described in the X.700-Series Recommendations. This Recommendation may be applicable to other TMN-related interfaces. KEYWORDS Abstract syntax, attribute, function, functional unit, object class, pa

33、rameter, performance management, performance monitoring, protocol, service. iv Recommendation Q.822 (W94) COPYRIGHT International Telecommunications Union/ITU TelecommunicationsLicensed by Information Handling ServicesITU-T RECMN*Q*822 94 4862593 0593356 298 = Recommendation Q.822 STAGE1, STAGE 2 AN

34、D STAGE 3 DESCRIPTION FOR THE Q3 INTERFACE - PERFORMANCE MANAGEMENT (Geneva, 1994) 1 Scope, purpose, and field of application 1.1 Scope This Recommendation provides a Stage 1, Stage 2 and Stage 3 Description (see Recommendation 4.68) for the parameter collection and thresholding aspects of Performan

35、ce Management. This Recommendation is part of a series of Recommendations that specify the Q3 interface (defined in Recommen- dation M.3010) requirements for communication: - - - - between an Operations System (OS) and a Network Element (NE); between an OS and a Mediation Device (MD); between an OS

36、and a Q Adaptor (QA); and between Operations Systems in a Telecommunication Management Network (TMN). 1.2 Purpose Current telecommunications networks are populated by a large and increasing number of OSs and NEs supplied by different vendors. Both the number and variety of networks and services have

37、 grown, creating a diversity of management needs. This growth has resulted in the proliferation of unique communication interfaces between OSs and NEs. The telecommunications industry stands to benefit from the standardization of these interfaces, designed to achieve interoperability between a broad

38、 range of OSs and NE/QAs using MDs where appropriate, and between OSS. The primary purpose of this document is to provide a set of application messages and associated support objects for the parameter collection and thresholding aspects of Performance Management. Because of the desirability of provi

39、ding common TMN solutions, these messages and support objects are expected to be applicable to other TMN or TMN-related interfaces. 1.3 Field of application This Recommendation defines an information model based on the specification of Managed Object classes. These Managed Object classes are support

40、ed through the interactive services specified in ITU-T Recommendation Q.8 12. 2 References The following Recommendations contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommen

41、dations are subject to revision, and parties to agreements based on this Recommendation are encouraged to investigate the possibility of applying the most recent edition of the Recommendations listed below. 2.1 Recommendations referred to in this Recommendation - - CCITT Recommendation M.3010. Princ

42、iples for a telecommunication management network (TMN). CCITT Recommendation M.3020, TMN inteace specification methodology. Recommendation Q.822 (04/94) 1 COPYRIGHT International Telecommunications Union/ITU TelecommunicationsLicensed by Information Handling Services ITU-T RECMN*Q.822 94 4862.593 05

43、93357 324 - - - - - CCITT Recommendation M.3 100, Generic network information model. CCITT Recommendation M.3200, TMN management services: overview. IT-T Recommendation 4.68, Overview of methodology for developing management services. ITU-T Recommendation 4.8 12, Upper layer protocol profiles for th

44、e Q3 interface. ITU-T Recommendation 4.821, Stage 2 and Stage 3 description for the Q3 interface - Alarm surveillance. - - CCITT Recommendation X.208, Specification of Abstract Syntax Notation One (ASN.1). CCITT Recommendation X.209, Specification of Basic Encoding Rules for Abstract Syntax Notation

45、 One (ASN. I). CCITT Recommendation X.2 16, Presentation service definition for open systems interconnection for CCIT applications. CCIT Recommendation X.701, Systems management overview. CCITT Recommendation X.7 10, Management information service definition - Common managemenr informtion service de

46、finition. - - - - CCITT Recommendation X.7 1 1, Management information protocol specification - Common management information pro tocol. CCITT Recommendation X.721, Definition of management information. CCIT Recommendation X.722, Guidelines for the definition of managed objects. CCITT Recommendation

47、 X.730, Object managernent function. CCITT Recommendation X.73 1, State management function. CCITT Recommendation X.733, Alarm reporting function. CCITT Recommendation X.734, Event report management function. CCITT Recommendation X.735, Log control function. ITU-T Recommendation X.738, Summarization

48、 function. ITU-T Recommendation X.739, Metric Objects and Attributes. - - - - - - - - - 3 Terms and definitions, abbreviations 3.1 Terms and definitions This Recommendation makes use of the following terms defined in CCITT Recommendation M.301 O: a) performance management; b) telecommunications mana

49、gement network (TMN). This Recommendation makes use of the following terms defined in CCIT Recommendation M.3020: TMN management function. This Recommendation makes use of the following terms defined in CCITT Recommendation X.216: application context. This Recommendation makes use of the following terms defined in CCITT Recommendation X.700: a) managed object class; b) object instance. 2 Recommendation Q.822 (04/94) COPYRIGHT International Telecommunications Union/ITU TelecommunicationsLicensed by Information Handling Services ITU-T RECMN*Q.22 94 = 4862573 0593158