ITU-T Q 3304 2-2012 Resource control protocol No 4 (rcp4) C Protocols at the Rc interface between a transport resource control physical entity and a transport physical entity SNMP .pdf

《ITU-T Q 3304 2-2012 Resource control protocol No 4 (rcp4) C Protocols at the Rc interface between a transport resource control physical entity and a transport physical entity SNMP .pdf》由会员分享，可在线阅读，更多相关《ITU-T Q 3304 2-2012 Resource control protocol No 4 (rcp4) C Protocols at the Rc interface between a transport resource control physical entity and a transport physical entity SNMP .pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 International Telecommunication Union ITU-T Q.3304.2TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (08/2012) SERIES Q: SWITCHING AND SIGNALLING Signalling requirements and protocols for the NGN Resource control protocols Resource control protocol No. 4 (rcp4) Protocols at the Rc interface between

2、a transport resource control physical entity and a transport physical entity: SNMP alternative Recommendation ITU-T Q.3304.2 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE Q.1Q.3 INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING Q.4Q.59 FUNCTI

3、ONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN Q.60Q.99 CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Q.100Q.119 SPECIFICATIONS OF SIGNALLING SYSTEMS No. 4, 5, 6, R1 AND R2 Q.120Q.499 DIGITAL EXCHANGES Q.500Q.599 INTERWORKING OF SIGNALLING SYSTEMS Q.600Q.699 SPECIFICATIONS OF SIGNALLING SYSTEM No

4、. 7 Q.700Q.799 Q3 INTERFACE Q.800Q.849 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 Q.850Q.999 PUBLIC LAND MOBILE NETWORK Q.1000Q.1099 INTERWORKING WITH SATELLITE MOBILE SYSTEMS Q.1100Q.1199 INTELLIGENT NETWORK Q.1200Q.1699 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR IMT-2000 Q.1700Q.1799 SPECIFICATIONS

5、 OF SIGNALLING RELATED TO BEARER INDEPENDENT CALL CONTROL (BICC) Q.1900Q.1999 BROADBAND ISDN Q.2000Q.2999 SIGNALLING REQUIREMENTS AND PROTOCOLS FOR THE NGN Q.3000Q.3999 General Q.3000Q.3029 Network signalling and control functional architecture Q.3030Q.3099 Network data organization within the NGN Q

6、.3100Q.3129 Bearer control signalling Q.3130Q.3179 Signalling and control requirements and protocols to support attachment in NGN environments Q.3200Q.3249 Resource control protocols Q.3300Q.3369Service and session control protocols Q.3400Q.3499 Service and session control protocols supplementary se

7、rvices Q.3600Q.3649 NGN applications Q.3700Q.3849 Testing for next generation networks Q.3900Q.3999 For further details, please refer to the list of ITU-T Recommendations. Rec. ITU-T Q.3304.2 (08/2012) i Recommendation ITU-T Q.3304.2 Resource control protocol No. 4 (rcp4) Protocols at the Rc interfa

8、ce between a transport resource control physical entity and a transport physical entity: SNMP alternative Summary Recommendation ITU-T Q.3304.2 specifies the profile of a variant of the resource control protocol No. 4 (rcp4) that uses the simple network management protocol (SNMP) at the Rc interface

9、, i.e., between the transport resource control physical entity (TRC-PE) and the transport physical entity (T-PE) in the resource and admission control functional block. This protocol operates across the Rc reference point, as defined in Recommendation ITU-T Y.2111. The interface is used for checking

10、 the network topology and resource status information of an access or a core network. History Edition Recommendation Approval Study Group 1.0 ITU-T Q.3304.2 2007-10-29 11 2.0 ITU-T Q.3304.2 v2 2012-08-13 11 ii Rec. ITU-T Q.3304.2 (08/2012) FOREWORD The International Telecommunication Union (ITU) is

11、the United Nations specialized agency in the field of telecommunications, information and communication technologies (ICTs). The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing R

12、ecommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics.

13、The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the necessary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Adm

14、inistration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. Compliance with this Recommendation is voluntary. However, the Recommendation may contain certain mandatory provisions (to ensure, e.g., interoperability or applicability) and

15、compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “shall“ or some other obligatory language such as “must“ and the negative equivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendat

16、ion is required of any party. INTELLECTUAL PROPERTY RIGHTS ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claim

17、ed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recomme

18、ndation. However, implementers are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database at http:/www.itu.int/ITU-T/ipr/. ITU 2013 All rights reserved. No part of this publication may be reproduced, by any means whatsoever, w

19、ithout the prior written permission of ITU. Rec. ITU-T Q.3304.2 (08/2012) iii Table of Contents Page 1 Scope 1 2 References. 1 3 Definitions 1 3.1 Terms defined elsewhere 1 3.2 Terms defined in this Recommendation . 1 4 Abbreviations and acronyms 2 5 Conventions 2 6 Rc interface . 2 6.1 Rc reference

20、 model . 2 7 Protocol specification . 3 8 Protocols and messages 3 8.1 Resource query message . 3 8.2 Resource state report message 3 9 Security considerations . 3 Appendix I Management information base . 4 Bibliography. 6 Rec. ITU-T Q.3304.2 (08/2012) 1 Recommendation ITU-T Q.3304.2 Resource contro

21、l protocol No. 4 (rcp4) Protocols at the Rc interface between a transport resource control physical entity and a transport physical entity: SNMP alternative 1 Scope This Recommendation provides the Stage 3 technical specifications for a protocol variant which uses the simple network management proto

22、col (SNMP) to satisfy the requirements for information transfer across the Rc reference point, as defined in clause 8.3 of ITU-T Y.2111. This protocol allows the transport resource control physical entity (TRC-PE) to collect network topology and resource status information from elements of an access

23、 or a core network. 2 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references ar

24、e subject to revision; users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a doc

25、ument within this Recommendation does not give it, as a stand-alone document, the status of a Recommendation. ITU-T Q.3300 v2 Recommendation ITU-T Q.3300 v2 (2010), Architectural framework for the Q.33xx series of Recommendations. ITU-T Y.2012 Recommendation ITU-T Y.2012 (2006), Functional requireme

26、nts and architecture of the NGN release 1. ITU-T Y.2111 Recommendation ITU-T Y.2111 (2008), Resource and admission control functions in next generation networks. IETF RFC 3416 IETF RFC 3416 (2002), Version 2 of the Protocol Operations for the Simple Network Management Protocol (SNMP). 3 Definitions

27、3.1 Terms defined elsewhere This Recommendation uses the following terms defined elsewhere: 3.1.1 transport physical entity (T-PE) ITU-T Q.3300: A term used to refer to any device implementing the transport functions in the limited sense provided in clause 7.2.4 of ITU-T Y.2111 (i.e., those with whi

28、ch the RACF interacts). 3.1.2 transport resource control physical entity (TRC-PE) ITU-T Q.3300: A device that implements the transport resource control functional entity (TRC-FE) as defined in clause 7.2.3.3 of ITU-T Y.2111. 3.2 Terms defined in this Recommendation None. 2 Rec. ITU-T Q.3304.2 (08/20

29、12) 4 Abbreviations and acronyms This Recommendation uses the following abbreviations and acronyms: DoS Denial of Service MIB Management Information Base NACE Network Attachment Control Entity OID Object ID PD-PE Policy Decision Physical Entity PE-PE Policy Enforcement Physical Entity SCE Service Co

30、ntrol Entity SNMP Simple Network Management Protocol T-PE Transport Physical Entity TRC-PE Transport Resource Control Physical Entity TRE-PE Transport Resource Enforcement Physical Entity 5 Conventions None. 6 Rc interface The Rc interface allows a transport resource control physical entity (TRC-PE)

31、 to collect network topology and resource status information about an access or a core network. The Rc interface is relevant to a transport physical entity (T-PE) at the network boundary or inside the network. 6.1 Rc reference model The Rc interface, as shown in Figure 6-1, is defined between the TR

32、C-PE and T-PE. Q.3304.2v2(12)_F6-1PD-PETRC-PEService stratumTransport stratumSCERACFRsRiRdRtRpRwRcRnRuTRE-PE PE-PET-P EOther NGNsNACEScope of thisRecommendationFigure 6-1 Rc reference model Rec. ITU-T Q.3304.2 (08/2012) 3 7 Protocol specification SNMPv2 IETF RFC 3416 shall apply to the Rc interface,

33、 where the TRC-PE acts as an SNMP manager and the transport elements are SNMP agents. The TRC-PE issues the SNMP-get (resource query message) to the T-PE and collects the resource information by retrieving interface information. If a change has occurred in the operational status or administrative st

34、atus at the interfaces of the T-PE, the change is reported by the SNMP-trap (resource state report message) issued by the T-PE, and the TRC-PE then updates its resource information. 8 Protocols and messages 8.1 Resource query message The TRC-PE collects interface information by issuing the SNMP-get

35、to transport elements, as shown in IETF RFC 3416. The interface information to be retrieved corresponds to the object IDs (OIDs) under OID:1.3.6.1.2.1. The management information bases (MIBs) and OIDs associated with SNMP-get are shown in Appendix I. 8.2 Resource state report message The change in t

36、he operational status at the interfaces of the transport element is reported to the TRC-PE by the SNMP-trap IETF RFC 3416. The generic SNMP-trap can be used for resource state report messages. SNMP-traps with generic trap Type 2 (linkDown) and generic trap Type 3 (linkUp) are utilized. The OIDs asso

37、ciated with the SNMP-trap are shown in Appendix I. 9 Security considerations There might be several possible security threats at the Rc interface, such as denial of service (DoS), message disclosure by unauthorized snooping, and unauthorized message creation and modification. In general, an attacker

38、 can surreptitiously intercept information, attempt to create unauthorized information, and/or send modified or reordered information. There might be a risk that an attacker can impersonate an SNMP manager and illicitly acquire and tamper with the information. Even though the information is encrypte

39、d, a reply attack might be possible. For these security threats, operators need to be aware that no sufficient authentication and encryption mechanisms are provided between the SNMP manager (TRC-PE) and SNMP agents (T-PE) in the SNMP version 2 framework. To minimize the risk, the SNMP entity needs t

40、o be properly configured so that only authorized SNMP managers and agents can access information and exchange it with each other. Particular attention to the credence and information integrity is necessary. Therefore, it is recommended that the implementers consider security features, such as authen

41、tication and encryption mechanisms, at the application level in the case where SNMP messages are open to an insecure domain in order to prevent possibilities of attacks from such a domain. At the same time, operators need to consider physical and/or logical SNMP traffic separation, packet filtering

42、from an unauthorized SNMP manager (TRC-PE) and SNMP agents (T-PE). Operators should note that a long-term solution would be to consider implementing the SNMP version 3 framework and its security control model described in b-IETF RFC 3414 and b-IETF RFC 3415. However, that is outside of the scope of

43、this Recommendation. 4 Rec. ITU-T Q.3304.2 (08/2012) Appendix I Management information base (This appendix does not form an integral part of this Recommendation.) The following Tables I.1, I.2 and I.3 shows the management information base (MIB) referenced respectively in b-IETF RFC 1213, b-IETF RFC

44、4293 and b-IETF RFC 2863. Table I.1 Management information base b-IETF RFC 1213 RFC MIB object Type Object identifier 1213 mib-2 1.3.6.1.2.1 System 1.3.6.1.2.1.1 sysDescr SCALAR 1.3.6.1.2.1.1.1 sysObjectID SCALAR 1.3.6.1.2.1.1.2 sysName SCALAR 1.3.6.1.2.1.1.5 Interface 1.3.6.1.2.1.2 ifTable TABLE 1.

45、3.6.1.2.1.2.2 ifEntry ENTRY 1.3.6.1.2.1.2.2.1 ifIndex TABULAR 1.3.6.1.2.1.2.2.1.1 ifDescr TABULAR 1.3.6.1.2.1.2.2.1.2 ifType TABULAR 1.3.6.1.2.1.2.2.1.3 ifSpeed TABULAR 1.3.6.1.2.1.2.2.1.5 ifPhysAddress TABULAR 1.3.6.1.2.1.2.2.1.6 ifAdminStatus TABULAR 1.3.6.1.2.1.2.2.1.7 ifOperStatus TABULAR 1.3.6.

46、1.2.1.2.2.1.8 Table I.2 Management information base b-IETF RFC 4293 RFC MIB object Type Object identifier 4293 mib-2 1.3.6.1.2.1 Ip 1.3.6.1.2.1.4 ipv6IpForwarding SCALAR 1.3.6.1.2.1.4.25 ipAddressTable TABLE 1.3.6.1.2.1.4.34 ipAddressEntry ENTRY 1.3.6.1.2.1.4.34.1 ipAddressAddrType TABULAR 1.3.6.1.2

47、.1.4.34.1.1 ipAddressAddr TABULAR 1.3.6.1.2.1.4.34.1.2 ipAddressIfIndex TABULAR 1.3.6.1.2.1.4.34.1.3 ipAddressPrefix TABULAR 1.3.6.1.2.1.4.34.1.5 Rec. ITU-T Q.3304.2 (08/2012) 5 Table I.3 Management information base b-IETF RFC 2863 RFC MIB object Type Object identifier 2863 mib-2 1.3.6.1.2.1 ifMIBOb

48、jects 1.3.6.1.2.1.31.1 ifIXTable TABLE 1.3.6.1.2.1.31.1.1 ifIXEntry ENTRY 1.3.6.1.2.1.31.1.1.1 ifName TABULAR 1.3.6.1.2.1.31.1.1.1.1 ifHighSpeed TABULAR 1.3.6.1.2.1.31.1.1.1.15 ifStackTable TABLE 1.3.6.1.2.1.31.1.2 ifStackEntry ENTRY 1.3.6.1.2.1.31.1.2.1 ifStackStatus TABULAR 1.3.6.1.2.1.31.1.2.1.3

49、6 Rec. ITU-T Q.3304.2 (08/2012) Bibliography b-IETF RFC 1213 IETF RFC 1213 (1991), Management Information Base for Network Management of TCP/IP-based internets: MIB-II. b-IETF RFC 2863 IETF RFC 2863 (2000), The Interfaces Group MIB. b-IETF RFC 3414 IETF RFC 3414 (2002), User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). b-IETF RFC 3415 IETF RFC 3415 (2002), View-based Access Control Model (VACM) for the Simple Network Management Protocol (S