ITU-T Q 1551-1997 Application of Intelligent Network Application Protocols (INAP) CS-1 for UPT Service Set 1 - Series Q Switching and Signalling Intelligent Network《UPT业务子集1的智能网应用协.pdf

《ITU-T Q 1551-1997 Application of Intelligent Network Application Protocols (INAP) CS-1 for UPT Service Set 1 - Series Q Switching and Signalling Intelligent Network《UPT业务子集1的智能网应用协.pdf》由会员分享，可在线阅读，更多相关《ITU-T Q 1551-1997 Application of Intelligent Network Application Protocols (INAP) CS-1 for UPT Service Set 1 - Series Q Switching and Signalling Intelligent Network《UPT业务子集1的智能网应用协.pdf（150页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL TELECOMMUNICATION UNION ITU=T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU SERIES Q: SWITCHING AND SIGNALLING I ntel I ig ent Network Q.1551 (06197) Application of Intelligent Network Application Protocols (MAP) CS-I for UPT Service Set I ITU-T Recommendation Q. 1551 (Previously CCI

2、TT Recommendation) STD*ITU-T RECMN Q-1551-ENGL 1997 D 48b2591 Ob41038 9b5 ITU-T Q-SERIES RECOMMENDATIONS SWITCHING AND SIGNALLING SIGNALLING IN THE INTERNATIONAL MANUAL SERVICE INTERNATIONAL AUTOMATIC AND SEMI-AUTOMATIC WORKING FUNCTIONS AND INFORMATION FLOWS FOR SERVICES IN THE ISDN SPECIFICATIONS

3、OF SIGNALLING SYSTEMS No. 4 AND No. 5 SPECIFICATIONS OF SIGNALLING SYSTEM No. 6 SPECIFICATIONS OF SIGNALLING SYSTEM RI SPECIFICATIONS OF SIGNALLING SYSTEM R2 DIGITAL EXCHANGES INTERWORKING OF SIGNALLING SYSTEMS SPECIFICATIONS OF SIGNALLING SYSTEM No. 7 DIGITAL SUBSCRIBER SIGNALLING SYSTEM No. 1 PUBL

4、IC LAND MOBILE NETWORK INTERWORKING WITH SATELLITE MOBILE SYSTEMS CLAUSES APPLICABLE TO ITU-T STANDARD SYSTEMS Interworking with Standard-A INMARSAT system Interworking with Standard-B INMARSAT system Interworking with the INMARSAT aeronautical rnobile-satellite system BROADBAND ISDN Q.l-Q.3 Q.4-Q.5

5、9 Q.60-(2.99 Q.100-Q.119 Q. 1 204.249 Q.250-Q .309 Q. 31 0-Q. 399 Q.400-Q.499 Q.500-Q.599 Q.600-Q.699 Q. 7004.849 Q.850-Q.999 Q. 1000-Q. 1 O99 Q.1100-Q.1199 Q.1100-(2.1109 (2.1 110-Q.1149 Q.1150-Q.1199 Q.2000-(2.2999 For further details, please refer to ITU-T List of Recommendations. STD*ITU-T RECMN

6、 Q-LS51-ENGL 1997 48b259L Ubi1037 BTL ITU-T RECOMMENDATION Q.1551 APPLICATION OF INTELLIGENT NETWORK APPLICATION PROTOCOLS (INAP) CS-1 FOR UPT SERVICE SET 1 Summary This Recommendation describes the application of INAP CS-1 (Refined) for UPT Service Set 1. It explains how to use INN as defined in CS

7、-1 Refinements to provide the UPT service. Clauses 1 to 3 contain general information including the Chosen architecture. Clause 4 describes the application contexts used for UPT. Clause 5 describes both the UPT information model and the UPT security procedures, using both a textual and an SDL descri

8、ption. Clause 5 constitutes the core part of the UPT Recommendation. The other clauses are included in this Recommendation because clause 5 is not in itself self-explanatory. The definition of the data model specifies (with some flexibility) the internetwork interface and as such should be considere

9、d as the main part of this Recommendation. I model as used in SDF. In clause 6 the UPT specific behaviour of the SCF is described for every UPT I Source ITU-T Recommendation Q.155 1 was prepared by ITU-T Study Group 11 (1997-2000) and was approved under the WTSC Resolution No. 1 procedure on the 5th

10、 of June 1997. STD*ITU-T RECMN Q-1551-ENGL 2797 D 48b259L Ob4LO40 513 9 FOREWORD ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (IT-T) is a permanent organ of the ITU. The ITU-T

11、 is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for stu

12、dy by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics. The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1. In some areas of information technology which fall within IT-Ts purview, the necessa

13、ry standards are prepared on a collaborative basis with IS0 and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. INTELLECTUAL PROPERTY RIGHTS The ITU draws attention to the

14、 possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. The ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outsid

15、e of the Recommendation development process. As of the date of approval of this Recommendation, the ITU hadhad not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent t

16、he latest information and are therefore strongly urged to consult the TSB patent database. O ITU 1998 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writ

17、ing from the ITU. 11 Recommendation Q.1551 (06/97) - - STD-ITU-T RECMN Q-1551-ENGL 1997 LiBb2591 Ob41041 Li5T 1 2 2.1 2.2 2.3 3 3.1 3.2 4 5 5.1 5.2 6.2 6.3 CONTENTS Page Scope References and abbreviations . References Definitions Abbreviations . UPT phase 1 requirements Architecture requirements Req

18、uirements on the network . Requirements on the originating network side 3.2.1 3.2.2 Requirements on the terminating network side . 3.2.3 Requirements on the fixed network UPT application contexts . UPT information model Introduction UPT information base . 5.2.1 Information base 5.2.2 Structure of th

19、e UPT information model . 6 SCF procedures . 6.1 General 6.1.1 Overview . 6.1.2 Charging procedures in the SDLs . 6.1.3 Conventions and notation 6.1.4 SLP description . Generic sequences 6.2.1 Identification and authentication . 6.2.2 Feature request identification 6.2.3 6.2.4 6.2.5 Release of the c

20、alling user . Connection of an SRF . Disconnection of an SRF . Personal mobility Registration for incoming calls . 6.3.1 6.3.2 Deregistration for incoming calls Recommendation Q.1551 (06/97) 2 2 3 3 5 5 5 6 6 16 19 19 19 20 20 24 27 27 36 39 40 43 44 44 57 . 111 STDeITU-T RECMN d-155L-ENGL 1797 48b2

21、571 ObliL042 39b Page 6.4 Call handling 63 6.4.1 Outgoing UPT call 64 6.4.2 Incoming UPT call 97 6.5 Service profile management procedure 120 6.5.1 Service profile interrogation procedure 120 . 6.5.2 Service profile modification procedure 127 . . Annex A 136 iv Recommendation Q.1551 (06/97) Introduc

22、tion This Recommendation describes the application of INAP CS-1 (Refined) i for UPT Service Set 1 8. Clauses 1 to 2 contain general information. Clause 3 describes the network architecture for UPT. In clause 4 the application contexts used for UPT are listed. Clause 5 describes both the UPT informat

23、ion model and the UPT security model as used in the SDF. In clause 6 the UPT specific behaviour of the SCF is described for every UPT procedures, using both a textual and an SDL description. Clause 5 constitutes the core part of the UPT Recommendation. The other clauses are included in this Recommen

24、dation because clause 5 is not in itself self-explanatory. Recommendation Q.1551 (06197) V Recommendation Q.1551 APPLICATION OF INTELLIGENT NETWORK APPLICATION PROTOCOLS (INAP) CS-1 FOR UPT SERVICE SET 1 (Geneva, 1997) 1 Scope This Recommendation specifies the application of Core INAP for the UPT se

25、rvice and describes the internetwork interface. It is applicable to UPT Service Set 1 as defined within RecommendationF.851 SI, but is limited to only those features which can be supported by INAP CS-1. This Recommendation includes procedures for handling the call forwarding supplementary services,

26、these enhancements to the procedures are optional. In this Recommendation only the generic SSF-SCF INN operations have been used, this does not preclude the use of the DP Specific operations. For the SSF-SRF case, this Recommendation does not use the assist handoff procedure. The UPT service relies

27、on the IN architecture as described in 4. 2 References and abbreviations 2.1 References The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated

28、were valid. All Recommendations and other references are subject to revision; all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Rec

29、ommendations is regularly published. ITU-T Recommendation Q. 12 1 8 (1 995), Interface Recommendation for intelligent network cs-I. ITU-T Recommendation 4.76 (1 995), Service procedures for Universal Personal Telecommunication - Functional modelling and information jlows. ITU-T Recommendation X.521

30、(1 997), Information technology - Open Systems Interconnection - The directory - Selected object classes. ITU-T Recornmendation Q. 1214 (1 995), Distributedfunctional plane for intelligent network cs-I. ITU-T Recommendation Q. 12 1 3 (1 995), Global functional plane for intelligent network cs-I. ITU

31、-T Recommendation Q. 1600 (1997), Interaction between ISUP and INAP. ITU-T Recommendation 4.763 (1993), Formats and codes of the ISDN User Part of Signalling System No. 7. ITU-T Recommendation F.85 1 (1 999, Universal Personal Telecommunication (UPT) - Service description (service set I). Recommenda

32、tion Q.1551 (06197) 1 2.2 Definitions No definitions have been identified. 2.3 Abbreviations This Recommendation uses the following abbreviations AC BCSM CFB CFNR CFU cs-1 DEREG-IN DTMF FRI FSM IA IN INN INCALL IP ISDN ns OUTCALL PIN PSTN PU1 REG-IN SCF I SCSM I SDF SDFh SDFo SIB SLP SLPI SPI SPM SR

33、F SSF SSP 2 Application Context Basic Call State Model Call Forwarding on Busy Call Forwarding on No Reply Call Forwarding Unconditional Capability Set 1 Dereg istration for incoming calls Dual Tone Multi Frequency Feature Request Identification Finite State Model Identification and Authentication I

34、ntelligent Network Intelligent Network Application Protocol Incoming Call Intelligent Peripheral Integrated Services Digital Network Sent part of the sequence number, i.e. the 16 least significant bits Outgoing Call Personal Identification Number Public Switched Telephone Network Personal User Ident

35、ity Registration for incoming calls Service Control Function SCF State Model Service Data Function Home Service Data Function Originating Service Data Function Service Independent Building Blocks Service Logic Program Service Logic Program Invocation Service Profile Interrogation Service Profile Mod

36、ification Specialized Resource Function Service Switching Function Service Switching Point Recommendation Q.1551 (06/97) TCAP Transaction Capabilities Application Part UPT Universal Personal Telecommunication UPTAC UPT Access Code UPTAN UPT Access Number 3 UPT phase 1 requirements The UPT service se

37、t 1 is a set of UPT features that can be implemented without major changes to current technology, and is basically restricted to provision in PSTN and ISDN, with voice and telephony type services. This clause includes a number of operational requirements. 3.1 Architecture requirements Figure l/Q.155

38、1- General UPT functional architecture Figure 1 gives an overview of the general UPT functional architecture. Apart from standard Intelligent Network (IN) terminology, the following notations are used in Figure 1 : - SCFh Home SCF; - SDFh Home SDF; - SMFh Home SMF; - - SCFo Local (“visitedlt) SCF, o

39、riginating side; SDFo Local (“visited“) SDF, originating side; Recommendation Q.1551 (06/97) 3 - - - The functional architecture for UPT Service Set 1 is described in Figure 2. The differences with the general UPT functional architecture are : - The interconnection of networks takes place between th

40、e SCFo and SDFh functional entities, as indicated by the arrow on the figure. The interface between SCF and SDF is specified in rN cs-1; SDFh stores all data related to the UPT user (i.e. the database in UPT Phase 1 is centralized); SDFh must as a consequence provide access control functions to chec

41、k whether or not requests received from remote entities are authorized requests or not; SDFh performs the authentication of the UPT user; SDFo stores a list of agreements, which indicates the identity of all the service providers whose subscribers are allowed to access UPT service in SDFos network;

42、SDFo stores a list of service limitations resulting from agreements with service providers or SDFo also stores information related to the management of the UPT service in its network, e.g. charging records which will be used later on for accounting. SMFo Local (“visited) SMF, originating side; SCFt

43、Local (“visited“) SCF, terminating side; SDFt Local (“visited“) SDF, terminating side. - - - - - I network limitations; - Home Terminating T1180680-96 Figure 2/Q.1551- Phase 1 UPT functional architecture 3.2 Requirements on the network The UPTAC, UPTAN and UPT number must be recognized by the SSP 4

44、Recommendation Q.1551 (06/97) 3.2.1 - Requirements on the originating network side Signalling systems used on the UNI will be those for the PSTN and ISDN. For interaction with the user, user-information is to be collected in-band by means of Dual Tone Multi Frequency (DTMF). This means that for ISDN

45、 the D-channel is not used for collecting user- information. In the PSTN, DTMF devices or terminals have to be used, because, for example, the non- fixed length numbers are ended with an #. ISDN terminals have to be provided with DTMF functionality, otherwise it would not be possible to carry in-ban

46、d information for user interactions. - - 3.2.2 - Requirements on the terminating network side Signalling systems used at the UNI will be those for the PSTN and ISDN. 3.2.3 - Requirements on the fixed network Feature interactions with line services are outside the scope of this Recommendation. 4 UPT

47、application contexts The UPT Service Set 1 shall use the application contexts as defined in i. The following application contexts are used at the interfaces with the SCF: SSP-SCP: - - itu-t recommendation q 12 18 scf-ssf-objects( 1) generic-ssf-to-scf(0) version1 (O); itu-t recommendation q 12 18 sc

48、f-ssf-srf-objects( 1) srf-to-scf(3) versionl(0). itu-t recommendation q 1218 sdf-objects(l0) 3 1 SCP-SDP: - 5 UPT information model 5.1 Introduction The UPT phase 1 needs a significant amount of data stored in the SDFs. Data for UPT are contained in the following data model. The aim of that model is

49、 two-fold: first to provide a list of all the data needed to support UPT Service Set 1 from the service and secondly to present the data as formally as possible so that they are ready to be used as parameters of the database operations. Due to the amount of information contained in the data model, the model needs to be formally organized. The information and its associated structure make up the UPT Information Base (UPT-IB). The contents of the data model is described in 5.2.1 and its structure in 5.2.2. The generic information base on which the present UPT-I