ITU-T G 983 9-2004 B-PON ONT management and control interface (OMCI) support for wireless Local Area Network interfaces SERIES G TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND ste.pdf

《ITU-T G 983 9-2004 B-PON ONT management and control interface (OMCI) support for wireless Local Area Network interfaces SERIES G TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND ste.pdf》由会员分享，可在线阅读，更多相关《ITU-T G 983 9-2004 B-PON ONT management and control interface (OMCI) support for wireless Local Area Network interfaces SERIES G TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND ste.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 INTERNATIONAL TELECOMMUNICATION UNION ITU-T G.983.9TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU (06/2004) SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Digital sections and digital line system Optical line systems for local and access networks B-PON ONT management and co

2、ntrol interface (OMCI) support for wireless Local Area Network interfaces ITU-T Recommendation G.983.9 ITU-T G-SERIES RECOMMENDATIONS TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS INTERNATIONAL TELEPHONE CONNECTIONS AND CIRCUITS G.100G.199 GENERAL CHARACTERISTICS COMMON TO ALL ANALOGU

3、E CARRIER-TRANSMISSION SYSTEMS G.200G.299 INDIVIDUAL CHARACTERISTICS OF INTERNATIONAL CARRIER TELEPHONE SYSTEMS ON METALLIC LINES G.300G.399 GENERAL CHARACTERISTICS OF INTERNATIONAL CARRIER TELEPHONE SYSTEMS ON RADIO-RELAY OR SATELLITE LINKS AND INTERCONNECTION WITH METALLIC LINES G.400G.449 COORDIN

4、ATION OF RADIOTELEPHONY AND LINE TELEPHONY G.450G.499 TESTING EQUIPMENTS G.500G.599 TRANSMISSION MEDIA CHARACTERISTICS G.600G.699 DIGITAL TERMINAL EQUIPMENTS G.700G.799 DIGITAL NETWORKS G.800G.899 DIGITAL SECTIONS AND DIGITAL LINE SYSTEM G.900G.999 General G.900G.909 Parameters for optical fibre cab

5、le systems G.910G.919 Digital sections at hierarchical bit rates based on a bit rate of 2048 kbit/s G.920G.929 Digital line transmission systems on cable at non-hierarchical bit rates G.930G.939 Digital line systems provided by FDM transmission bearers G.940G.949 Digital line systems G.950G.959 Digi

6、tal section and digital transmission systems for customer access to ISDN G.960G.969 Optical fibre submarine cable systems G.970G.979 Optical line systems for local and access networks G.980G.989 Access networks G.990G.999 QUALITY OF SERVICE AND PERFORMANCE - GENERIC AND USER-RELATED ASPECTS G.1000G.

7、1999 TRANSMISSION MEDIA CHARACTERISTICS G.6000G.6999 DIGITAL TERMINAL EQUIPMENTS G.7000G.7999 DIGITAL NETWORKS G.8000G.8999 For further details, please refer to the list of ITU-T Recommendations. ITU-T Rec. G.983.9 (06/2004) i ITU-T Recommendation G.983.9 B-PON ONT management and control interface (

8、OMCI) support for wireless Local Area Network interfaces Summary This Recommendation provides the Optical Network Termination (ONT) management and control interface (OMCI) specification for the support of wireless Local Area Network interfaces on Broadband Passive Optical Network (B-PON) systems as

9、defined in ITU-T Rec. G.983.1. The OMCI specification is based on ITU-T Recs G.983.2 and G.983.8, but provides the necessary enhancements to these Recommendations which are needed to support the management of IEEE 802.11 interfaces. Source ITU-T Recommendation G.983.9 was approved on 13 June 2004 by

10、 ITU-T Study Group 15 (2001-2004) under the ITU-T Recommendation A.8 procedure. ii ITU-T Rec. G.983.9 (06/2004) FOREWORD The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-

11、T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis. The World Telecommunication Standardization Assembly (WTSA), which meets every four ye

12、ars, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics. The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1. In some areas of information technology which fall within ITU-Ts purview, the nec

13、essary standards are prepared on a collaborative basis with ISO and IEC. NOTE In this Recommendation, the expression “Administration“ is used for conciseness to indicate both a telecommunication administration and a recognized operating agency. Compliance with this Recommendation is voluntary. Howev

14、er, the Recommendation may contain certain mandatory provisions (to ensure e.g. interoperability or applicability) and compliance with the Recommendation is achieved when all of these mandatory provisions are met. The words “shall“ or some other obligatory language such as “must“ and the negative eq

15、uivalents are used to express requirements. The use of such words does not suggest that compliance with the Recommendation is required of any party. INTELLECTUAL PROPERTY RIGHTS ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a

16、 claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process. As of the date of approval of this Recommendation, ITU

17、had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database. ITU 2005 All rig

18、hts reserved. No part of this publication may be reproduced, by any means whatsoever, without the prior written permission of ITU. ITU-T Rec. G.983.9 (06/2004) iii CONTENTS Page 1 Scope 1 2 References. 1 3 Abbreviations 1 4 Reference model and terms 2 5 Requirements of the management interface speci

19、fication 2 5.1 Configuration management 3 5.2 Fault management 3 5.3 Performance management 3 5.4 Security management . 3 6 Protocol-independent MIB for the OMCI 3 6.1 Managed entities associated with IEEE 802.11 interfaces. 3 6.2 Managed entity diagrams . 3 7 Modified managed entities . 4 7.1 Subsc

20、riber line cardholder 4 7.2 Interworking VCC termination point . 4 8 New managed entities for IEEE 802.11 management 4 8.1 Physical path termination point 802.11 UNI 4 8.2 802.11 Station management data 1. 6 8.3 802.11 station management data 2 . 8 8.4 802.11 General purpose object. 10 8.5 802.11 MA

21、C users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published. The reference to a document within this Rec

22、ommendation does not give it, as a stand-alone document, the status of a Recommendation. 1 ITU-T Recommendation G.983.1 (1998), Broadband optical access systems based on Passive Optical Networks (PON). 2 ITU-T Recommendation G.983.2 (2002), ONT management and control interface specification for B-PO

23、N. 3 ITU-T Recommendation G.983.8 (2003), B-PON OMCI support for IP, ISDN, video, VLAN tagging, VC cross-connections and other select functions. 4 IEEE 802.11 MIB (1999), Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific

24、requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, Annex D. 3 Abbreviations This Recommendation uses the following abbreviations: AP Access Point B-PON Broadband Passive Optical Network BSS Basic Service Set CCA Clear Channel Assessment CFP Conten

25、tion Free Period CTS Clear To Send DCF Distributed Coordination Function DSSS Direct-Sequence Spread Spectrum 2 ITU-T Rec. G.983.9 (06/2004) DTIM Delivery Traffic Indication Message ESS Extended Service Set FHSS Frequency-Hopping Spread Spectrum IBSS Independent Basic Service Set ICV Integrity Check

26、 Value IR Infrared LME Layer Management Entity MAC Media Access Control ME Managed Entity MIB Management Information Base MLME MAC Layer Management Entity MMPDU MAC Management Protocol Data Unit MPDU MAC Protocol Data Unit MSDU MAC Service Data Unit OLT Optical Line Terminal OMCI ONT Management and

27、Control Interface ONT Optical Network Terminal ONU Optical Network Unit PCF Point Coordination Function PHY Physical layer PLCP Physical Layer Convergence Protocol PMD Physical Medium Dependent RF Radio Frequency RTS Request To Send SIFS Short Interframe Space SME Station Management Entity STA Stati

28、on TU Time Unit UNI User Network Interface VCC Virtual Channel Connection WEP Wired Equivalent Privacy 4 Reference model and terms See 4/G.983.2. 5 Requirements of the management interface specification See 5/G.983.2. ITU-T Rec. G.983.9 (06/2004) 3 5.1 Configuration management See 5.1/G.983.2. 5.2 F

29、ault management See 5.2/G.983.2. 5.3 Performance management The following performance management-related managed entities are added to the list given in 5.3/G.983.2. m) IEEE 802.11 Counters 5.4 Security management See 5.4/G.983.2. 6 Protocol-independent MIB for the OMCI See 6/G.983.2. 6.1 Managed en

30、tities associated with IEEE 802.11 interfaces The managed entities in Table 1 are defined in addition to the managed entities defined in ITU-T Rec. G.983.2. Table 1/G.983.9 Additional managed entities in the OMCI Managed Entity Required/Optional Description Physical Path Termination Point 802.11 UNI

31、 CR Used for IEEE 802.11 interface supported by the ONT 802.11 Station Management data 1 CR Used for IEEE 802.11 interface supported by the ONT 802.11 Station Management data 2 CR Used for IEEE 802.11 interface supported by the ONT 802.11 General Purpose Object CR Used for IEEE 802.11 interface supp

32、orted by the ONT 802.11 MAC “Get current data“ returns the real-time value of the actual counters associated with those attributes. Notifications Threshold Crossing Alert: This notification is used to notify the management system when a Threshold Crossing Alert (TCA) has been detected or cleared. Th

33、e TCA change notification “on“ will be sent at the crossing of the threshold by the actual counter; the TCA change notification “off“ will be sent at the end of the 15-min period since that is when the actual counters are reset to 0x00. The event list for this entity is given in Table 4. Table 4/G.9

34、83.9 Alarm list for 802.11 counters Number Event Description Threshold data counter # (Note) Threshold Crossing Alert 0 dot11Failed MSDU transmit failure threshold crossing 1 1 dot11RTSFailure RTS failure count threshold crossing 2 2 dot11ACKFailure ACK failure count threshold crossing 3 3 dot11FCSE

35、rror FCS error count threshold crossing 4 4 dot11WEPUndecryptable WEP undecryptable count threshold crossing 5 5-255 Reserved NOTE This numbering is used with the associated Threshold Data managed entity. Threshold data counter 1 indicates the 1st thresholded counter that is associated with the Thre

36、shold Value 1 attribute of the Threshold DataB-PONmanaged entity. 8.7 802.11 PHY FHSS DSSS IR tables Relationships One instance of this managed entity may exist for each instance of an IEEE 802.11 interface. The ONU automatically creates an instance of this entity whenever a PPTP 802.11 UNI instance

37、 is created. 16 ITU-T Rec. G.983.9 (06/2004) Attributes Managed Entity id: This attribute provides a unique number for each instance of this managed entity. This ME id shall be the same as that of the related instance of physical path termination point 802.11 UNI. (R) (mandatory) (2 bytes). dot11Hop

38、Time: The time in microseconds for the PMD to change from channel 2 to channel 80. (R) (mandatory) (1 byte). dot11CurrentChannelNumber: The current channel number of the frequency output by the RF synthesizer. (R, W) (mandatory) (1 byte). dot11MaxDwellTime: The maximum time in TU that the transmitte

39、r is permitted to operate on a single channel. (R) (mandatory) (2 bytes). dot11CurrentDwellTime: The current time in TU that the transmitter shall operate on a single channel, as set by the MAC. Default is 19 TU. (R, W) (mandatory) (2 bytes). dot11CurrentSet: The current set of patterns the PHY LME

40、is using to determine the hopping sequence. (R, W) (mandatory) (1 byte). dot11CurrentPattern: The current pattern the PHY LME is using to determine the hop sequence. (R, W) (mandatory) (1 byte). dot11CurrentIndex: The current index value the PHY LME is using to determine the CurrentChannelNumber. (R

41、, W) (mandatory) (1 byte). dot11CurrentChannel: The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in ETSI TS 101 270-1 VI.2.1 Section 15.4.6.2. (R, W) (mandatory) (1 byte). dot11CCAModeSupported: dot11CCAModeSupported is a bit-significant value, representi

42、ng all of the CCA modes supported by the PHY. Valid values are: energy detect only (ED_ONLY) = 0x01, carrier sense only (CS_ONLY) = 0x02, carrier sense and energy detect (ED_and_CS) = 0x04 or the logical sum of any of these values. (R) (mandatory) (1 byte). dot11CurrentCCAMode: The current CCA metho

43、d in operation. Valid values are: energy detect only (edonly) = 0x01, carrier sense only (csonly) = 0x02, carrier sense and energy detect (edandcs) = 0x04 (R, W) (mandatory) (1 byte). dot11EDThreshold: The current energy detect threshold being used by the DSSS PHY. (R, W) (mandatory) (4 bytes). dot1

44、1CCAWatchdogTimerMax: This parameter, together with CCAWatchdogCountMax, determines when energy detected in the channel can be ignored. Units are in time ticks. (R, W) (mandatory) (4 bytes). dot11CCAWatchdogCountMax: This parameter, together with CCAWatchdogTimerMax, determines when energy detected

45、in the channel can be ignored. Units are in time ticks. (R, W) (mandatory) (4 bytes). dot11CCAWatchdogTimerMin: The minimum value to which CCAWatchdogTimerMax can be set. Units are in time ticks. (R, W) (mandatory) (4 bytes). dot11CCAWatchdogCountMin: The minimum value to which CCAWatchdogCount can

46、be set. Units are in time ticks. (R, W) (mandatory) (4 bytes). ITU-T Rec. G.983.9 (06/2004) 17 Actions Create: Create an instance of this managed entity. Delete: Delete an instance of this managed entity. Get: Get one or more attributes. Set: Set one or more attributes. Notifications None. 9 Managed

47、 entity identifiers The ONT management and control protocol cell format is defined in ITU-T Rec. G.983.2. As new managed entities are introduced into the OMCI specifications, the managed entity identifier that is used in the message identifier field shall be defined. Table 5 gives the class values f

48、or the new managed entities. The class values for existing managed entities are found in Table 21/G.983.2. Table 5/G.983.9 Managed entity identifiers Managed entity class value Managed entity 91 Physical Path Termination Point 802.11 UNI 92 802.11 Station Management data 1 93 802.11 Station Manageme

49、nt data 2 94 802.11 General Purpose Object 95 802.11 MAC&PHY Operation and Antenna Data 96 802.11 Counters 97 802.11 PHY FHSS DSSS IR Tables 98255 Reserved Printed in Switzerland Geneva, 2005 SERIES OF ITU-T RECOMMENDATIONS Series A Organization of the work of ITU-T Series B Means of expression: definitions, symbols, classification Series C General telecommunication statistics Series D General tariff principles Series E Overall network operation, telephone service, service operation and human factors Series F Non-telephone telecommunicatio