ICEA S-87-640-2011 Optical Fiber Outside Plant Communications Cable (Fifth Edition)《厂外光纤通信电缆(第5版)》.pdf

《ICEA S-87-640-2011 Optical Fiber Outside Plant Communications Cable (Fifth Edition)《厂外光纤通信电缆(第5版)》.pdf》由会员分享，可在线阅读，更多相关《ICEA S-87-640-2011 Optical Fiber Outside Plant Communications Cable (Fifth Edition)《厂外光纤通信电缆(第5版)》.pdf（100页珍藏版）》请在麦多课文档分享上搜索。

1、 STANDARD FOR OPTICAL FIBEROUTSIDE PLANT COMMUNICATIONS CABLEApproved by AMERICAN NATIONAL STANDARDS INSTITUTEJanuary 17,2012 Publication # ANSI/ICEA S-87-640-2011Fifth Edition 2011 by ICEA INSULATED CABLE ENGINEERS ASSOCIATION, Inc.ANSI/ICEA S-87-640-2011 i ANSI/ICEA S-87-640-2011 STANDARD FOR OPTI

2、CAL FIBEROUTSIDE PLANT COMMUNICATIONS CABLE January 17, 2012 Fifth Edition Published By Insulated Cable Engineers Association, Inc. (ICEA) P.O. Box 1568 Carrollton, Georgia 30112, USA (770) 830-0369 Approved June 7, 2011, by INSULATED CABLE ENGINEERS ASSOCIATION, Inc. Approved January 17, 2012, by A

3、NSI ASC C-8 AMERICAN NATIONAL STANDARDS INSTITUTE ii Copyrighted by the ICEA Contents may not be reproduced in any form without permission of the INSULATED CABLE ENGINEERS ASSOCIATION, INC. Copies of this publication may be ordered online or by contacting: IHS 15 Inverness Way East Englewood, CO 801

4、13-5776 USA Telephone: (800) 854-7179 iii NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is un

5、animous agreement among every person participating in the development of this document. The Insulated Cable Engineers Association, Inc. (ICEA) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development proces

6、s. This process brings together persons who have an interest in the topic covered by this publication. While ICEA administers the process and establishes rules to promote fairness in the development of consensus, it does not independently test, evaluate, or verify the accuracy or completeness of any

7、 information or the soundness of any judgments contained in its standards and guideline publications. ICEA disclaims liability for personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from th

8、e publication, use of, application, or reliance on this document. ICEA disclaims and makes no guaranty or warranty, expressed or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any

9、 of your particular purposes or needs. ICEA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, ICEA is not undertaking to render professional or other se

10、rvices for or on behalf of any person or entity, nor is ICEA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the

11、exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. ICEA has no power, nor does it

12、 undertake to police or enforce compliance with the contents of this document. ICEA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safety-related information in this document

13、shall not be attributable to ICEA and is solely the responsibility of the certifier or maker of the statement. iv This page intentionally blank. v FOREWORD (This Foreword is not part of this Standard.) This Standard provides information on specifying optical fiber cables for outdoor use in telecommu

14、nications applications. The first edition of this Standard was approved by ICEA on March 4, 1992, and the second revision on September 15, 1999. A third revision was approved by ICEA on June 8, 2005. It was published by ICEA, but was not published as an ANSI-approved Standard. Revision 4 of this Sta

15、ndard, approved by ICEA on September 13, 2006, was a republication of revision 3. It was approved by The American National Standards Institute (ANSI) on December 8, 2006 and adopted by the Telecommunications Industry Association (TIA) as TIA-472D000-B in April 2007. The members of the ICEA Communica

16、tions Cable Division Working Group who participated in the fifth edition of this standard were: Jim Ryan, Chairman and Editor M. D. Kinard D. Baker D. Hessong P. Fraley J. Register J. Shinoski D. Taylor P. VanVickle This issue replaces the previous issue of ANSI/ICEA S-87-640-2006, Standard for Opti

17、cal Fiber Outside Plant Communications Cable. Major changes in this revision include the following: g120 Addition of new fiber types g120 Addition of a mid-span buffer tube storage testing g120 Addition of a buffer tube kink test g120 Addition of all-dielectric self-support cable requirements g120 A

18、ddition of an informative annex on General Outside Plant Optical Fiber Cable Installation Considerations This Standard contains eight annexes. Annexes C, D and F are normative and are considered part of this Standard. Annex E is normative and considered part of this Standard when required by the cus

19、tomer. Annexes A, B, G, and H are informative and are not considered part of this Standard. ICEA Standards are adopted in the public interest and are designed to eliminate misunderstanding between the manufacturer and user and to assist the user in selecting and obtaining proper products for a parti

20、cular need. The existence of an ICEA Standard does not in any respect preclude the manufacture or use of products not conforming to this Standard. vi The user of this Standard is cautioned to observe any applicable health or safety regulations and rules relative to the manufacture and use of cable m

21、ade in conformity with this Standard. This Standard hereafter assumes that only properly trained personnel using suitable equipment will manufacture, test, install, and/or perform maintenance on cables defined by this Standard. Questions of interpretation of ICEA Standards can only be accepted in wr

22、iting and the reply shall be provided in writing. Suggestions for improvements in this Standard are welcome. Questions and suggestions shall be sent to: Secretary Insulated Cable Engineers Association, Inc. Post Office Box 1568 Carrollton, GA 30112 United States of America Alternatively, you can con

23、tact ICEA by utilizing the Contact link in the ICEA web site: vii This page intentionally blank. viii CONTENTSSECTION PAGEPART 1 INTRODUCTION 1 1.1 Scope 1 1.2 General . 3 1.3 Units 4 1.4 Definitions . 4 1.5 References 5 1.6 Information to be Supplied by the User 5 1.7 Modification of this Standard

24、 6 1.8 Quality Assurance. 6 1.9 Safety Considerations. 6 PART 2 OPTICAL FIBERS 8 2.1 General . 8 2.2 Optical Fiber Classes 8 2.3 Optical Fiber Requirements 8 2.4 Optical Fiber Coating and Requirements . 8 PART 3 OPTICAL FIBER CORE UNITS 11 3.1 General . 11 3.2 Loose Buffer Tubes 11 3.3 Optical Fiber

25、 Bundles . 12 3.4 Optical Fiber Ribbons . 12 3.5 Tight Buffers 13 PART 4 CABLE AND COMPONENT ASSEMBLY AND IDENTIFICATION 14 4.1 Cabling of Multi-Fiber and Composite Optical Cables 14 4.2 Identification of Fibers within a Unit 14 4.3 Identification of Units within a Cable. 14 4.4 Identification of Co

26、nductors in Composite Cable 14 4.5 Strength Members 16 ix CONTENTS (cont.) SECTION PAGEPart 4: (Continued) 4.6 Assembly of Cables 16 4.7 Filling and Flooding Material. 16 PART 5 COVERINGS 17 5.1 Binders 17 5.2 Core Wrap 17 5.3 Shielding, Armoring, or Other Metallic Coverings. 17 5.4 Jackets 19 5.5 J

27、acket Repairs 23 5.6 Other Coverings 23 5.7 Ripcords 23 PART 6 OTHER REQUIREMENTS 24 6.1 Identification and Date Markings 24 6.2 Optical Cable Identification and Other Markings 25 6.3 Length Marking . 25 6.4 Cable Remarking 26 6.5 Packaging, Packing, and Package Marking . 26 PART 7 TESTING, TEST MET

28、HODS, AND REQUIREMENTS 28 7.1 Testing 28 7.2 Extent of Testing. 28 7.3 Standard Test Conditions . 28 7.4 Electrical Testing of Conductive Materials 29 7.5 Construction, Color Code, and Identification 29 7.6 Jacket Thickness Measurements . 30 7.7 Jacket Material Density Measurement . 30 7.8 Jacket Te

29、nsile Strength, Yield Strength, and Ultimate Elongation Tests . 30 7.9 Jacket Material Absorption Coefficient Test . 31 x CONTENTS (cont.) SECTION PAGEPart 7: (Continued) 7.10 Environmental Stress Crack Resistance Test 31 7.11 Jacket Shrinkage Test 32 7.12 Verification of Cable Length and Marking Ac

30、curacy. 33 7.13 Cable and Component Dimensions 33 7.14 Ribbon Dimensions. 34 7.15 Ribbon Twist Test . 34 7.16 Ribbon Residual Twist Test 35 7.17 Ribbon Separability Test. 35 7.18 Ripcord Functional Test 36 7.19 Material Compatibility and Cable Aging Test 37 7.20 Tight Buffer Strippability Test 39 7.

31、21 Cable Low and High Temperature Bend Test 39 7.22 Cable External Freezing Test . 40 7.23 Compound Flow (Drip) Test for Filled Cable 40 7.24 Cable Temperature Cycling Test 41 7.25 Hydrogen Evolution in Cable 41 7.26 Cable Sheath Adherence Test . 42 7.27 Cyclic Flexing Test 42 7.28 Water Penetration

32、 Test. 43 7.29 Cable Impact Test. 43 7.30 Cable Tensile Loading and Fiber Strain Test . 44 7.31 Cable Compression Loading Test 46 7.32 Cable Twist Test . 46 7.33 Cable Lightning Damage Susceptibility Test 47 7.34 Mid-Span Buffer Tube Storage. 48 7.35 Central Tube Cable Coupling . 48 7.36 Oxidative I

33、nduction Time, OIT 49 7.37 Buffer Tube Kink Test . 49 xi CONTENTS (cont.) SECTION PAGEPART 8 FINISHED CABLE OPTICAL PERFORMANCE REQUIREMENTS 51 8.1 Optical Performance. 51 8.2 Attenuation Coefficient 52 8.3 Multimode Optical Bandwidth . 53 8.4 Optical Point Discontinuities . 53 8.5 Cable Cutoff Wave

34、length (Single-Mode Fibers Only) 54 8.6 Polarization Mode Dispersion (Single-Mode Fibers Only) 54 PART 9 REFERENCES 56ANNEXESAnnex A (Informative) Suggested Information for a Purchase Document62 Annex B (Informative) Metallic Covering Materials .64 Annex C (Normative) Requirements for Very-Low Tempe

35、rature Applications 69 Annex D (Normative) Self-supporting Figure-8 Cables Designs.71 Annex E (Normative) 1625 nm Cabled Fiber Performance Requirements .77 Annex F (Normative) All-Dielectric Self-Supporting Cable (ADSS) 78 Annex G (Informative) General Outside Plant Optical Fiber Cable Installation

36、Considerations .79 Annex H (Informative) ICEA Telecommunications Cable Standards. 84 FIGURESFigure 7.1 Ribbon dimensional parameters. 34 Figure 7.2 Ribbon preparation . 36 Figure 7.3 Ribbon separation. 36 Figure D.1 Cable galloping test schematic. 76 xii CONTENTS (cont.) TABLES PAGETable 1.1 Cable n

37、ormal temperature ranges 2 Table 2.1 Multimode optical fiber specification requirements. 9 Table 2.2 Single-mode optical fiber specification requirements . 10 Table 4.1 Individual fiber, unit, and group identification 15 Table 5.1 Requirements for jackets removed from completed cable . 21 Table 5.2

38、Jacket thickness requirements . 22 Table 6.1 Year of manufacture marker threads 25 Table 7.1 Sample preparation and test set-up, jacket tensile properties . 31 Table 7.2 Maximum dimensions of optical fiber ribbons. 34 Table 8.1 Attenuation coefficient performance requirements. 51 Table 8.2 Multimode

39、 bandwidth coefficient performance requirements. 51 Table 8.3 Point discontinuity acceptance criteria 52 Table 8.4 Optical attenuation measurement methods 52 Table 8.5 Multimode optical bandwidth measurement methods 53 Table B.1 Thickness of aluminum alloy tapes. 64 Table B.2 Thickness of copper, co

40、pper alloy, and bronze tapes 65 Table B.3 Thickness of copper-steel-copper laminate tapes 65 Table B.4 Stainless steel tape composition 66 Table B.5 Stainless steel tape physical performance . 67 Table B.6 Thickness of stainless steel tapes 67 Table B.7 Thickness of steel tapes . 67 Table B.8 Steel

41、tape composition . 68 Table D.1 Outer jacket thickness requirements for figure-8 messenger cables . 72 Table D.2 Dimension requirements for messenger webs . 72 Table E.1 Acceptance criteria for L-Band operation . 77 xiii This page intentionally blank. ANSI/ICEA S-87-640-2011 1 PART 1 INTRODUCTION1.1

42、 Scope 1.1.1 ProductsThis Standard covers optical fiber communications cable intended for outdoor use and normally installed aerially, directly buried, or placed in underground ducts. Additional requirements are included in Annex D for “figure-8” aerial self-supporting cables and in Annex F for all-

43、dielectric self-support cables, as appropriate. Materials, constructions, and performance requirements are included in the Standard, together with applicable test procedures. Refer to other published ICEA (TIA) cable product standards for information on optical fiber cable requirements for other app

44、lications: g120 S-83-596: Standard for indoor optical fiber cable (TIA-472C000-C) g120 S-104-696: Indoor-outdoor optical fiber cable (ANSI/TIA-472E000) g120 S-110-717: Optical fiber drop cable (ANSI/TIA-472F000) g120 S-112-718: Optical fiber cable for placement in sewer environments (TIA-472G000) 1.

45、1.2 Applications SpaceProducts covered by this Standard are intended for operation only under conditions normally found in communications systems. These products normally convey communications signals (voice, video, and data) from point-to-point or point-to-multi-point, external to buildings. Produc

46、ts covered by this Standard may be factory terminated with connectors or splicing modules. When a composite cable is required, the applicable metallic conductor requirements shall be as established by agreement between the end user and the cable manufacturer. The requirements of ANSI/ICEA S-84-608 s

47、hould be considered when determining appropriate requirements. 1.1.3 Temperature RangesThe normal temperature ranges for cables covered by this Standard are given in Table 1.1 For the purposes of this standard, very-low temperature applications are defined as -50 g113C (-58 g113F) per 1.4.1.6 and ar

48、e addressed in Annex C (Normative), which contains requirements for lower operating and storage temperatures than listed in Table 1.1. ANSI/ICEA S-87-640-2011 2 Table 1.1 - Cable normal temperature ranges C (F) Operation -40 to +70 (-40 to +158) Storage and Shipping -40 to +70 (-40 to +158) Installa

49、tion -30 to +60 (-22 to +140) 1.1.4 Tensile Rating The standard installation tensile rating for cables covered by this Standard is 2670 N (600 lbf). Higher tensile ratings are also acceptable. For applications where a lower tensile rating is appropriate the standard lower tensile rating is 1330 N (300 lbf). In all cases, the residual load is defined as a load equal to 30 percent of the installation tensile rating. For self-supporting aerial applications there are additional considerations that need to be addressed to ens