ICC I-CODE ICCPC-2018 I-Codes ICCPC C International Performance For Buildings and Facilities Code.pdf

《ICC I-CODE ICCPC-2018 I-Codes ICCPC C International Performance For Buildings and Facilities Code.pdf》由会员分享，可在线阅读，更多相关《ICC I-CODE ICCPC-2018 I-Codes ICCPC C International Performance For Buildings and Facilities Code.pdf（213页珍藏版）》请在麦多课文档分享上搜索。

1、 2 0 1 8INTERNATIONAL CODESGet a free 45-day online subscription to ICCs premiumACCESS2018 I-Codes Complete Collection. Test drive many powerful, time-saving tools available to you from premiumACCESS. To activate your bonus, visit www.iccsafe.org/codebonus.2018 I-CODE BONUS OFFERINTERNATIONAL CODE C

2、OUNCILPERFORMANCE CODEfor Buildings and FacilitiesICCPCA Member of the International Code Family2018 International Code Council Performance Codefor Buildings and FacilitiesFirst Printing: August 2017ISBN: 978-1-60983-753-2 (soft-cover edition)COPYRIGHT 2017byINTERNATIONAL CODE COUNCIL, INC.Date of F

3、irst Publication: August 31, 2017ALL RIGHTS RESERVED. This 2018 International Code Council Performance Codefor Buildings and Facilities is a copy-righted work owned by the International Code Council, Inc. Without advance written permission from the copyright owner, nopart of this book may be reprodu

4、ced, distributed or transmitted in any form or by any means, including, without limitation, elec-tronic, optical or mechanical means (by way of example, and not limitation, photocopying or recording by or in an informationstorage retrieval system). For information on use rights and permissions, plea

5、se contact: Publications, 4051 Flossmoor Road,Country Club Hills, IL 60478. Phone 1-888-ICC-SAFE (422-7233). Trademarks: “International Code Council,” the “International Code Council” logo, “ICC,” the “ICC” logo, “International CodeCouncil Performance Code,” “ICCPC” and other names and trademarks ap

6、pearing in this book are trademarks of the Interna-tional Code Council, Inc., and/or its licensors (as applicable), and may not be used without permission.PRINTED IN THE U.S.A.2018 INTERNATIONAL CODE COUNCIL PERFORMANCE CODEFOR BUILDINGS AND FACILITIES iiiPREFACEIntroductionInternationally, the desi

7、gn and regulatory community has embraced the need for a code thatemphasizes performance requirements rather than prescriptive requirements. This need is notunique to the international community. As such, the International Code Council Performance Codefor Buildings and Facilities (ICCPC), in this 201

8、8 edition, is designed to meet this need throughmodel code regulations that safeguard the public health and safety in all communities, large andsmall.The International Code Council Performance Codefor Buildings and Facilities clearly defines theobjectives for achieving the intended levels of occupan

9、t safety, property protection and communitywelfare. The code provides a framework to achieve the defined objectives in terms of tolerable lev-els of damage and magnitudes of design events, such as fire and natural hazards.The concepts covered by this code are not intended to be any different in scop

10、e than those cov-ered by the 2018 edition of the International Codes(I-Codes) published by the International CodeCouncil(ICC). However, this code is distinctly different from the other International Codes, which,in many cases, direct the user to a single solution to address a safety concern for a bu

11、ilding or facil-ity. The ICCPC allows the user to achieve various solutions, systematically. It should be noted thatthe family of International Codes, including the International Building Code, International EnergyConservation Code, International Existing Building Code, International Fire Code, Inte

12、rnationalFuel Gas Code, International Green Construction Code, International Mechanical Code, Interna-tional Plumbing Code, International Private Sewage Disposal Code, International Property Mainte-nance Code, International Residential Code, International Swimming Pool and Spa Code,International Wil

13、dland-Urban Interface Codeand International Zoning Code, is considered to pro-vide an acceptable solution that will comply with the ICCPC. Conversely, this code provides a proce-dure to address design and review issues associated with the alternative materials and methodssections of the codes cited

14、above.It is strongly recommended that users of this code consult the Users Guide located in the secondportion of this publication to gain additional insight into the provisions of this code.The International Code Council Performance Code for Buildings and Facilities provisions providemany benefits,

15、including the model code development process, which offers an international forumfor design professionals, code officials and other interested parties to discuss performance coderequirements. This forum provides an excellent arena to debate proposed revisions. This modelcode also encourages internat

16、ional consistency in the application of provisions.The I-Codes, including this International Code Council Performance Code, are used in a variety ofways in both the public and private sectors. Most industry professionals are familiar with the I-Codes as the basis of laws and regulations in communiti

17、es across the U.S. and in other countries.However, the impact of the codes extends well beyond the regulatory arena, as they are used in avariety of nonregulatory settings, including: Voluntary compliance programs such as those promoting sustainability, energy efficiencyand disaster resistance. The

18、insurance industry, to estimate and manage risk, and as a tool in underwriting and ratedecisions. Certification and credentialing of individuals involved in the fields of building design, con-struction and safety. Certification of building and construction-related products. U.S. federal agencies, to

19、 guide construction in an array of government-owned properties. Facilities management. “Best practices” benchmarks for designers and builders, including those who are engaged inprojects in jurisdictions that do not have a formal regulatory system or a governmentalenforcement mechanism.iv 2018 INTERN

20、ATIONAL CODE COUNCIL PERFORMANCE CODEFOR BUILDINGS AND FACILITIES College, university and professional school textbooks and curricula. Reference works related to building design and construction.In addition to the codes themselves, the code development process brings together building pro-fessionals

21、 on a regular basis. It provides an international forum for discussion and deliberationabout building design, construction methods, safety, performance requirements, technologicaladvances and innovative products.DevelopmentThis 2018 edition presents the code as originally issued, with changes reflec

22、ted in the 2003 through2015 editions and further changes approved by the ICC Code Development Process through 2017. Anew edition such as this is promulgated every 3 years.This code is intended to establish provisions consistent that adequately protect public health,safety and welfare; that do not un

23、necessarily increase construction costs; that do not restrict theuse of new materials, products or methods of construction; and that do not give preferential treat-ment to particular types or classes of materials, products or methods of construction.MaintenanceThe International Code Council Performa

24、nce Code for Buildings and Facilities is kept up to datethrough the review of proposed changes submitted by code enforcement officials, industry repre-sentatives, design professionals and other interested parties. Proposed changes are carefully con-sidered through an open code development process in

25、 which all interested and affected parties mayparticipate.The ICC Code Development Process reflects principles of openness, transparency, balance, dueprocess and consensus, the principles embodied in OMB Circular A-119, which governs the federalgovernments use of private-sector standards. The ICC pr

26、ocess is open to anyone; there is no cost toparticipate, and people can participate without travel cost through the ICCs cloud-based app, cdp-Access. A broad cross section of interests are represented in the ICC Code Development Process.The codes, which are updated regularly, include safeguards that

27、 allow for emergency action whenrequired for health and safety reasons.In order to ensure that organizations with a direct and material interest in the codes have a voicein the process, the ICC has developed partnerships with key industry segments that support theICCs important public safety mission

28、. Some code development committee members were nomi-nated by the following industry partners and approved by the ICC Board: American Institute of Architects (AIA) International Association of Fire Chiefs (IAFC) National Association of Home Builders (NAHB) National Association of State Fire Marshals

29、(NASFM)The code development committees evaluate and make recommendations regarding proposedchanges to the codes. Their recommendations are then subject to public comment and council-widevotes. The ICCs governmental memberspublic safety officials who have no financial or businessinterest in the outco

30、mecast the final votes on proposed changes.The contents of this work are subject to change through the code development cycles and by anygovernmental entity that enacts the code into law. For more information regarding the code devel-opment process, contact the Codes and Standards Development Depart

31、ment of the InternationalCode Council.While the I-Code development procedure is thorough and comprehensive, the ICC, its membersand those participating in the development of the codes disclaim any liability resulting from thepublication or use of the I-Codes, or from compliance or noncompliance with

32、 their provisions. TheICC does not have the power or authority to police or enforce compliance with the contents of thiscode.2018 INTERNATIONAL CODE COUNCIL PERFORMANCE CODEFOR BUILDINGS AND FACILITIES vCode Development Committee Responsibilities(Letter Designations in Front of Section Numbers)In ea

33、ch code development cycle, proposed changes to this code are considered at the CommitteeAction Hearings by nine different code development committees. The committee responsible foreach section of this code is noted by the bracketed letter in front of that section. For example, pro-posed changes to c

34、ode sections that have BS in front of them (e.g., BS 501.1) are considered bythe IBCStructural Code Development Committee during the Committee Action Hearings in the2019 (Group B) code development cycle.The letter classifications corresponding to the code development committee responsible for hear-i

35、ng code change proposals for that section are as follows:A = Administrative Code Development Committee;BE = IBCMeans of Egress Code Development Committee;BF = IBCFire Safety Code Development Committee;BG = IBCGeneral Code Development Committee;BS = IBCStructural Code Development Committee;CE = Comme

36、rcial Energy Conservation Code Development Committee;F = International Fire Code Development Committee;M = International Mechanical Code Development Committee; andP = International Plumbing Code Development Committee.For the development of the 2021 edition of the I-Codes, there will be two groups of

37、 code develop-ment committees and they will meet in separate years.vi 2018 INTERNATIONAL CODE COUNCIL PERFORMANCE CODEFOR BUILDINGS AND FACILITIESCode change proposals submitted for this code will be heard by the code development commit-tees noted in brackets in the text of the code. Because differe

38、nt committees hold CommitteeAction Hearings in different years, proposals for this code will be heard by committees in both the2018 (Group A) and 2019 (Group B) code change cycles.For example, Section A 102.1 is the responsibility of the Administrative Code DevelopmentCommittee. As noted in the prec

39、eding table, that committee will hold its Committee Action Hear-ings in 2019 to consider code change proposals for the chapters for which it is responsible. There-fore, any proposals received for Section A 102.1 will be assigned to the Administrative CodeDevelopment Committee and will be considered

40、in 2019, during the Group B code change cycle.As another example, Section BG 802.1 is designated as the responsibility of the IBCGeneralDevelopment Committee, which is part of the Group A portion of the hearings. This committee willhold its Committee Action Hearings in 2018 to consider code change p

41、roposals for the chapters forwhich it is responsible. Therefore, any proposals received for Section BG 802.1 will be assigned tothe IBCGeneral Development Committee for consideration in 2018.It is very important that anyone submitting code change proposals understands which codedevelopment committee

42、 is responsible for the section of the code that is the subject of the codechange proposal. For further information on code development committee responsibilities, pleasevisit the ICC website at www.iccsafe.org/scoping.Group A Codes(Heard in 2018, Code Change ProposalsDeadline: January 8, 2018)Group

43、 B Codes(Heard in 2019, Code Change ProposalsDeadline: January 7, 2019)International Building Code Egress (Chapters 10, 11, Appendix E) Fire Safety (Chapters 7, 8, 9, 14, 26) General (Chapters 26, 12, 2733,Appendices A, B, C, D, K, N)Administrative Provisions (Chapter 1 of allcodes except IECC, IRC

44、and IgCC, administra-tive updates to currently referenced stan-dards, and designated definitions)International Fire Code International Building Code Structural (Chapters 1525, Appendices F,G, H, I, J, L, M)International Fuel Gas Code International Existing Building CodeInternational Mechanical Code

45、International Energy Conservation CodeCommercialInternational Plumbing Code International Energy Conservation CodeResidential IECCResidential IRCEnergy (Chapter 11)International Property Maintenance Code International Green Construction Code(Chapter 1)International Private Sewage Disposal Code Inter

46、national Residential Code IRCBuilding (Chapters 110,Appendices E, F, H, J, K, L, M, O, Q, R, S, T)International Residential Code IRCMechanical (Chapters 1223) IRCPlumbing (Chapters 2533, Appendices G, I, N, P)International Swimming Pool and Spa CodeInternational Wildland-Urban Interface CodeInternat

47、ional Zoning CodeNote: Proposed changes to the ICC Performance Code will be heard by the code development committee noted in brack-ets in the text of the ICC Performance Code.2018 INTERNATIONAL CODE COUNCIL PERFORMANCE CODEFOR BUILDINGS AND FACILITIES viiMarginal MarkingsSolid vertical lines in the

48、margins within the body of the code indicate a technical change from therequirements of the 2015 edition. Deletion indicators in the form of an arrow ( ) are provided inthe margin where an entire section, paragraph, exception or table has been deleted or an item in alist of items or a table has been

49、 deleted.AdoptionThe International Code Council maintains a copyright in all of its codes and standards. Maintainingcopyright allows the ICC to fund its mission through sales of books, in both print and electronic for-mats. The ICC welcomes adoption of its codes by jurisdictions that recognize and acknowledge theICCs copyright in the code, and further acknowledge the substantial shared value