GSA A-A-131 B-1997 RUBBER BANDS《橡胶圈》.pdf

《GSA A-A-131 B-1997 RUBBER BANDS《橡胶圈》.pdf》由会员分享，可在线阅读，更多相关《GSA A-A-131 B-1997 RUBBER BANDS《橡胶圈》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 m 9999974 O254827 537 = J Metric November 25. 1997 Superseding November 17,1988 A-A-131B A-A-131A COMMERCIAL ITEM DESCRIPTION RUBBER BANDS The General Services Administration has authorized the use of this commercial item description by ail federal agencies. 1. ScoPe: This Commercial Item Descripti

2、on covers natural, synthetic, or synthetic natural rubber bands which are used in an office environment. 2. Salient Characteristics: The rubber bands shall be compounded from natural rubber, synthetic rubber (SBR), or synthetic natural rubber (polyisoprene), or any mixture of the three. 2.1 The unit

3、 weight shall be O. 113 kg (U4 Ib.) or 0.454 kg (1 lb.), as specified in the contract or order. 2.2 The number of rubber bands per pound for each size band shall be as specified in Table 1 and tested in accordance with ASTM D 412. 2.3 The inside length shall be as specified in Table 1. when tested i

4、n accordance with Section 3. 2.4 The rubber bands shall meet the requirements specified in Table II. 2.5 The rubber bands shall have no objectionable odor 2.6 Workmanship. The rubber bands shall be free from ragged and nicked edges and other defects which may affect appearance or might affect servic

5、eability. 3. Remlatorv Requirements: The offerer/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). Beneficial comments, recommendations, additions, deletions, clarifications, etc. an

6、d any data which may improve this document should be sent to General Services Administration, Federal Supply Service, Engineering Branch, 26 Federal Plaza, New York, NY 10278. FSC 7510 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-i. Sizes Tensile

7、Strength Breaking Force Ultimate Tensile set, min (p.si.) min N (lbs) Elongation max % kg/cm 2 min % 8 through 19 .691N (5) 700 15 1.66N (12) 700 15 12 E! 84.4 (1,200) 3.32N (24) 700 15 A-A-131B Table I. She Designation, Count and Inside Length Size Number Number of Bands Inside Length per pound (mi

8、n) cm(inch) 8 7,300 2.22 (7/8) +/- .159 (1/16) 10 5,200 3.17 (1 1/4) +/- .159 (1/16) 11 4,050 3.81 (1 1/2) +/- .258 (3/32) 16 2,300 6.35 (2 1/2) +/- .317 (1/8) 18 1,900 7.62 (3) +/- .397 (5/32) 19 1,700 8.89 (3 1/2) +/- .476 (3/16) 32 950 7.62 (3) +/- .397 (5/32) 33 850 8.89 (3 1/2) +/- .476 (3/16)

9、64 425 8.89 (3 1/2) +/- .476 (3/16) 84 210 8.89 (3 1/2) +/- .476 (3/16) 4. Oualitv Assurance Reauirements: 4.1 Product Conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producers own drawings, specifications, standards and q

10、uality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance. 4.2 Performance Tests: Tensile Strength Breaking Force ASTM D 412-Method B ASTM D 412-Method B (In calculating tensile strength or bre

11、aking force, the breaking force is the maximum load at rupture.) -2- Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-J A-A-13 1B Ultimate Elongation Tensile Set ASTM D 412-Method B ASTM D 412-Method A (For the purpose of this test , rubber bands shal

12、l be stretched to a 700% elongation. The grips for the test apparatus shall be as specified in Method B.) Inside Length. To examine the length, place the band on a flat surface and, using a straight edge, press each band together until the inner surface touches throughout the entire length of the ba

13、nd. Measure the length between the inner ends to the nearest 1/32 inch (7.92 cm). 5. Packavine: Preservation, packing, palletization and marking shall be as specified in the contract or order. 6. Notes: 6.1 Source of Documents. Issues of the following documents, in effect on the date of invitation f

14、or bids or request for proposal form a part of this document to the extent specified herein. 6.1.1 Federal Acquisition Regulation (FAR) may be obtained from the Superintendent of Documents, Government Printing Office, Washington. DC 20402. 6.1.2 Application for copies of appropriate ASTMs are availa

15、ble through the American Society for Testing and Materials; 100 Harbor Dr., West Conshohocken, PA 19428-2959. 6.2 National Stock Number Listing (NSNs). The following is a list of nsns assigned which correspond to this CID. The list may not be indicative of all possible nsns associated with the CID.

16、7510-00-205-0371 7510-00-243-3437 7510-01-058-9971 7510-00-205-0842 7510-00-285-1787 75 10-0 1-058-9973 75 10-00-205-1 438 7510-01-058-9972 7510-01-059-4183 7510-00-205-1439 7510-01-058-9974 7510-01-368-3495 7510-00-243-3434 75 10-00-551-5073 7510-00-243-3435 7510-0 1-058-9970 MILITARY INTERESTS: Preparing Activity: NONE,: DoD has no registered interest in revisions and amendments to this Commercial Item Description until further notice. -3 - GSA-FSS Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-