GOST ISO 8442-6-2013 Materials and articles in contact with foodstuffs Cutlery and table holloware Part 6 Lightly silver-plated table hollo-ware protected by lacquer Specifications.pdf

《GOST ISO 8442-6-2013 Materials and articles in contact with foodstuffs Cutlery and table holloware Part 6 Lightly silver-plated table hollo-ware protected by lacquer Specifications.pdf》由会员分享，可在线阅读，更多相关《GOST ISO 8442-6-2013 Materials and articles in contact with foodstuffs Cutlery and table holloware Part 6 Lightly silver-plated table hollo-ware protected by lacquer Specifications.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、 , . 6 ,. (ISO 8442-6:1997, IDT) , ()INTERSTATE COUNCIL FOR STANDARDIZATION, METROLOGY AND CERTIFICATION(ISC)ISO 8442-62013, - 1.092 . 1.22009 . -, . , , 1 , 42 (-)3 , ( 3 2013 . 62-) : ( 3166) 00497 ( 3166) 00497 AMBYKGMDRU -4 ISO 8442-6:1997 Materials andarticlesincontactwithfoodstuffs Cutleryandt

2、ablehollow-ware.Part6:Lightlysilver-platedtablehollow-wareprotected by lacquer ( . - . 6. , - ).TC186 (en). , - , , , . (IDT)5 5 2013 . 2190- ISO 8442-62013 1 2015 .6 II ISO 8442-62013 -, - . () . , - - , 2014 -, III ISO 8442-620131 .12 13 24 .25 36 37 5 () . 6 () , . . 7 () 8 D () - .9 () 10 F () 1

3、1 G () 12 () .13 I () 14 J () - .1515IV ISO 8442-62013 , . 6 , . Materialsandarticlesincontactwithfoodstuffs.Tablehollow-wareandcutlery.Part 6.Lightlysilver-platedtablehollow-wareprotectedbylacquer.Specifications1 ,. , , , ,.,-,.,-,-. -. , ,-.2 .-:ISO 301EN ISO2177.ISO 4481.ISO 6508 . . -(DEFGHK)EN

4、ISO8442-2:1997.2.-EN 10088-1.1.ENV 12875-1:1998 -.1.1 ISO 8442-62013 201501013 :3.1 (table hollow-ware): .3.2 (functional surface): , .3.3 (other surfaces): , , , , .3.4 (attachments): , .3.5 (load-bearing attachments): / , , , , , .3.6 (burr): , - .3.7 (vessel): , - / .3.8 (usable capacity): , (15

5、c1771) .3.9 (popping): , , , .3.10 (visual inspection): , (250 c17750) , - , 250 .3.11 (light silver plating): C 0,3,5.3.12 (lacquer): .4 4.1 4.1.1 , , - 1.4.1.2 .3 98,5 %.4.2 - 50 , . , , , , , , , , - . 1 , , %C, Cr, Ni, Cu, Mn, Fe, Pb, As, Sn, Zn, - 3)0,10 17 8 - 3)0,10 132 ISO 8442-62013 1 , %C,

6、 Cr, Ni, Cu, Mn, Fe, Pb, As, Sn, Zn, 0,08 0,087 0,45 (Cu, Ni, Zn) 9 60 0,5 0,3 0,5 (Cu, Zn) 60 3,52) 99,4 0,2 0,2 ISO 301 ZnA14 1ISO 301 ZnA14Cu1 1Pewter 0,5 90 Alloy1) 1) , .2) , , 0,05 % Pb.3) - EN 10088-1.5 5.1 B ( ) -EN ISO8442-2:1997() , -, 0,3 0,2 .5.2 5.2.1 .5.2.2 .5.2.3 0,4 . , .5.2.4 5.2.15

7、.2.3 5.2.3 .5.3 . . 89/109 1 90/128 2.6 6.1 6.1.1 . , .6.1.2 . , .3 ISO 8442-620136.1.3 D .6.2 6.2.1 E - , 300 , 3,5 100 .6.2.2 F .6.2.3 G.6.3 6.3.1 G , .6.3.2 , , 1,5 - , , , .6.4 , 2, . 2 , , 100 0,25 100 500 0,40 150 1,06.5 G - , . .6.6 EN ISO 8442-2:1997 , . - , (150c17710) (30c1775) - (20 c1775) C. EN ISO 8442-2:1997 . .6.7 () , , ENV 12875-1 125 - 6.1.1, 6.3 6.6.4 ISO 8442-620137 7.1 , -