GOST EN 12840-2011 Safety of machine tools Manually controlled turning machines with or without automatic control《机床安全性 带或不带自动控制的手工控制旋转机械》.pdf

《GOST EN 12840-2011 Safety of machine tools Manually controlled turning machines with or without automatic control《机床安全性 带或不带自动控制的手工控制旋转机械》.pdf》由会员分享，可在线阅读，更多相关《GOST EN 12840-2011 Safety of machine tools Manually controlled turning machines with or without automatic control《机床安全性 带或不带自动控制的手工控制旋转机械》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、2014 , (EN 12840:2001, ID) , ()INTERSTATE COUNCIL FOR STANDARDIZATION, METROLOGY AND CERTIFICATION(ISC) EN 12840 2011 EN 128402011II, 1.092 . 1.22009 . , . , , -, 1 - ()2 3 , (- 29 2011 . 40) : ( 3166) 00497 ( 3166) 00497 BYKZKGRU 4 13 2011 . 1204- EN 128402011 1 2013 .5 EN 12840:2001 Safety of mach

2、ine-tools Manually controlled turning machines with or without automatic control ( . , , ). (IDT). - . 1284020066 III EN 128402011 - , - . () - . , . C, 2014 -, . EN 128402011IV1 12 13 .44 .65 / 135.1 . 135.2 195.3 226 246.1 .246.2 24 () .27 () 28 321 EN 128402011 201301011 , - , , ( / , ) - , - - (

3、 ). , 4. , ( , , , -, ). , - . - (), - (N 12415 N 12478). - (. 1 19). , .2 - . - . (- ).EN ISO 12100-:2004 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology ( . , . 1. , )EN ISO 12100-2:2004 Safety of machinery Basic concepts, general principles

4、 for design Part 2: Technical principles ( . , . 2. - ) , Safety of machine-tools.Manually controlled turning machines with or without automatic control EN 1284020112EN ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs ( . )EN 349:2008

5、 Safety of machinery Minimum gaps to avoid crushing of parts of the human body ( - . , )EN ISO 13850:2008 Safety of machinery Emergency stop Principles for design ( . . )EN 547-1:2009 Safety of machinery Human body measurements Part 1: Principles for determining the dimensions required for openings

6、for whole body access into machinery ( . - . 1. )EN 547-2:2009 Safety of machinery Human body measurements Part 2: Principles for determining the dimensions required for access openings ( . -. 2. )EN 574:2008 Safety of machinery Two-hand control devices Functional aspects Principles for design ( . .

7、 . - )EN 614-1:2006+A1:2009 Safety of machinery Ergonomic design principles Part 1: Terminology and general principles ( . . 1. )EN 614-2:2000+A1:2008 Safety of machinery Ergonomic design principles Part 2: Interactions between the design of machinery and work tasks ( . -. 2. )EN 894-1:2009 Safety o

8、f machinery Ergonomics requirements for the design of displays and control actuators Part 1: General principles for human interactions with displays and control actuators ( - . . 1. - )EN 894-2:2009 Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2:

9、Displays ( . . 2. )N 894-3:2010 Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators ( . - . 3. )EN 953:2009 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards ( . . - )EN ISO 1

10、3849-1:2008 Safety of machinery Safety-related parts of control systems Part 1: General principles for design ( . , -. 1. )EN ISO 4413:2011 Hydraulic fluid power General rules and safety requirements for systems and their components (. , -)EN ISO 4414:2011 Pneumatic fluid power General rules and saf

11、ety requirements for systems and their components (. , -)EN 1005-1:2009 Safety of machinery Human physical performance Part 1: Terms and definitions (. . . 1. )EN 1005-2:2009 Safety of machinery Human physical performance Part 2: Manual handling of machinery and component parts of machinery (. . -.

12、2. )EN 1005-3:2009 Safety of machinery Human physical performance Part 3: Recommended force limits for machinery operation ( . . 3. - )EN 1005-4:2009 Safety of machinery Human physical performance Part 4: Evaluation of working postures and movements in relation to machinery ( . -. 4. )3 EN 128402011

13、EN 1037:2008 Safety of machinery Prevention of unexpected start-up ( . - )EN ISO 12100:2011 Safety of machinery General principles for design Risk assessment and risk reduction ( . . EN 1070:1998 Safety of machinery Terminology ( . -)EN 1088:2008 Safety of machinery Interlocking devices associated w

14、ith guards Principles for design and selection ( . - . )EN 1550:2008 Machine-tools safety Safety requirements for the design and construction of work holding chucks ( . - )EN 1760-2:2009 Safety of machinery Pressure sensitive protective devices Part 2: General principles for the design and testing o

15、f pressure sensitive edges and pressure sensitive bars ( . , . 2. )N 1837:1999 N 12415:2000 - EN 1837:2009 Safety of machinery Integral lighting of machines ( . )EN 60204-1:2006+A1:2009 Safety of machinery Electrical equipment of machines General requirements ( . . 1. )EN 60529:1992 Specification fo

16、r degrees of protection provided by enclosures (IP code) ( -, ( IP)EN 60825-1:2007 Safety of laser products. Equipment classification and requirements ( . 1. )EN ISO 3744:2011 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering meth

17、ods for an essentially free field over a reflecting plane (. - . - )EN ISO 3746:2011 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (. . )EN ISO 6385:2004 Ergono

18、mic principles in the design of work systems ( )EN ISO 9614-1:2009 Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points (. . 1. )EN ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (. , . . )EN ISO 11204:2010 Acoustics Noise emitted by machinery and equipment Determin