GME QK 002700-2009 PA6 with Glass Fibres (English German)《含玻璃纤维的聚酰胺6 英语 德语[代替 GME QK 009997]》.pdf
《GME QK 002700-2009 PA6 with Glass Fibres (English German)《含玻璃纤维的聚酰胺6 英语 德语[代替 GME QK 009997]》.pdf》由会员分享,可在线阅读,更多相关《GME QK 002700-2009 PA6 with Glass Fibres (English German)《含玻璃纤维的聚酰胺6 英语 德语[代替 GME QK 009997]》.pdf(11页珍藏版)》请在麦多课文档分享上搜索。
1、MaterialSpecificationPlastics QK 002700PA6 with Glass Fibres PA6 mit Glasfasern1 Scope 1 ZweckThis material specification describes the generalrequirements of material types from reinforcedpolyamide 6, which are used in injected or extrudedform for moulded components (e.g. body or chassis).Diese Wer
2、kstoffvorschrift umfasst die allgemeinenAnforderungen an Werkstofftypen aus Polyamid 6verstrkt, die in gespritzter oder extrudierter Form frFormteile im Fahrzeugbereich (z.B. Karosserie oderChassis) zum Einsatz kommen.2 References 2 ReferenzenNote: Only the latest approved standards are appli-cable
3、unless otherwise specified.Hinweis: Wenn nicht anders angegeben, ist jeweilsdieneueste Fassung derangegebenenReferenz gl-tig.GMW3013General requirements for handling of technical termsof delivery for plasticsGMW3013Allgemeine Anforderungen fr die Handhabung vonTechnischen Lieferbedingungen fr Kunsts
4、toffeGMW3029Polyamide 6 Glass Fiber ReinforcedGMW3029Polyamid 6 GlasfaserverstrktGMW3059Restricted and reportable substances for partsGMW3059Regelung berdieZulssigkeitvon gefhrlichen Stof-fenGMW8753Polyamide 6 Glass Bead/Glass Fiber ReinforcedGMW8753Polyamid 6 Glaskugel-/GlasfaserverstrktGMW14335Det
5、ermining the Moisture Content of Plastic Compo-nents and Moulding CompoundsGMW14335Bestimmung des Wassergehaltes von Kunststoffendurch WrmelagerungGMW14650Performance Requirements for Exterior Plastic PartsGMW14650Anforderungen an KunststoffauenteileGMW14651Material Related Interior Plastic Part Per
6、formanceGMW14651Werkstoffanforderungen an KunststoffinnenteileISO 75-1Plastics, Deterimination of temperature of deflectionunder load Part 1: General test methodISO 75-1Kunststoffe, Bestimmung der Wrmeformbestndig-keitstemperatur Teil 1: Allgemeine PrfmethodeISO 75-2Plastics, Deterimination of tempe
7、rature of deflectionunder load Part 2: Plastics and eboniteISO 75-2Kunststoffe, Bestimmung der Wrmeformbestndig-keitstemperatur Teil 2: Kunststoffe und HartgummiISO 75-3Plastics, Deterimination of temperature of deflectionunderload Part3: High-strength thermosettinglam-inates and long-fibre-reinforc
8、ed plasticsISO 75-3Kunststoffe, Bestimmung der Wrmeformbestndig-keitstemperatur Teil 3: Hochfeste duroplastischeLaminate und langfaserverstrkte Kunststoffe Copyright 2009 General Motors Corporation All Rights ReservedPublication Department: GME Specification CenterFebruary 2009 - Issue No. 7 Page 1
9、of 11PRD045 - VPRE ST 1 10/03 QK 002700 GM EUROPE ENGINEERING STANDARDSISO 179Plastics; determination of Charpy impact strengthISO 179Kunststoffe; Bestimmung der Schlagzhigkeit nachCharpyISO 527-1Plastics; determination of tensile properties; part 1:general principlesISO 527-1Kunststoffe; Bestimmung
10、 der Eigenschaften aus demZugversuch; Teil 1: Allgemeine GrundstzeISO 527-2Plastics; determination of tensile properties; part 2:test conditions for moulding and extrusion plasticsISO 527-2Kunststoffe; Bestimmung der Eigenschaften aus demZugversuch; Teil 2: Prfbedingungen fr Spritzguss-und Extrusion
11、s-FormmassenISO 1110Plastics - polyamide - accelerated conditioning of testspecimensISO 1110Kunststoffe - Polyamid - Beschleunigte Konditionie-rung von ProbekrperISO 1183-3Plastics; methods for determining the density and rel-ative density of non-cellular plasticsISO 1183-3Kunststoffe; Verfahren zur
12、 Bestimmung der Dichteund relativen Dichte von ungeschumten Kunststof-fenISO 3451-1Plastics - determination of ash; part 1: general meth-odsISO 3451-1Kunststoffe - Bestimmung der Asche; Teil 1: Allge-meine VerfahrenON 202Technical Documents; Product Liability and Protec-tion NoticeON 202Technische D
13、okumente; Produkthaftung und Schutz-vermerkQK 000000Information for handling of technical terms of deliveryfor plasticsQK 000000Information zur Handhabung der Technischen Liefer-bedingungen fr Kunststoffe3 Material 3 WerkstoffPolyamide 6 reinforced with glass fibres and/or glassbeads.Polyamid 6 mit
14、Glasfasern und/oder Glaskugeln ver-strkt.4 Symbol 4 Kurzzeichen PA6-GF PA6-GB PA6-(GF+GB) PA6-GF PA6-GB PA6-(GF+GB) 20 %by mass1,0 Massenanteil in % bei 20 Massenanteil in %verstrkten Werkstofftypen(test to GMW14335). aufweisen (Prfung nach GMW14335).Impact modified types (code letters E and P) do n
15、othave to be conditioned, if they have in their dry asmolded condition the similar impact strength as theconforming conditioned unmodified types.Schlagzh modifizierte Typen (Kennbuchstaben Eund P) mssen nicht konditioniert werden, wenn sieim spritztrockenen Zustand dieselbe Schlagzhigkeiterreichen w
16、ie die entsprechenden konditionierten,nicht modifizierten Typen.Deviations from this shall be specifically indicated onthe part drawings.Abweichungenhiervon mssen auf derTeilzeichnungbesonders vorgeschrieben werden.7.2 General Group Description. 7.2 Allgemeine Gruppenbeschreibung.7.2.1 Group 1. This
17、 group describes glass fibresreinforced material types, which are used for man-ufacturing parts with high strength and dimensionalstability.7.2.1 Gruppe 1. Diese Gruppe umfasst glasfaser-gefllte Werkstofftypen, die zur Herstellung von Tei-len mit hoher Festigkeit und Mahaltigkeit eingesetztwerden.7.
18、2.1.1 Type 1. This material type is reinforced with15 % by mass glass fibres.7.2.1.1 Typ1. DieserWerkstofftypistmit15Massen-anteil in % Glasfasern verstrkt.7.2.1.2 Type 2. This material type is reinforced with25 % by mass glass fibres.7.2.1.2 Typ2. DieserWerkstofftypistmit25Massen-anteil in % Glasfa
19、sern verstrkt.7.2.1.3 Type 3. This material type is reinforced with30 % by mass glass fibres.7.2.1.3 Typ3. DieserWerkstofftypistmit30Massen-anteil in % Glasfasern verstrkt.7.2.1.4 Type 4. This material type is reinforced with35 % by mass glass fibres.7.2.1.4 Typ4. DieserWerkstofftypistmit35Massen-an
20、teil in % Glasfasern verstrkt.7.2.1.5 Type 5. This material type is reinforced with50 % by mass glass fibres.7.2.1.5 Typ5. DieserWerkstofftypistmit50Massen-anteil in % Glasfasern verstrkt.7.2.1.6 Type 6. This material type is reinforced with40 % by mass glass fibres.7.2.1.6 Typ6. DieserWerkstofftypi
21、stmit40Massen-anteil in % Glasfasern verstrkt.7.2.1.7 Type 7. This material type is reinforced with20 % by mass glass fibres.7.2.1.7 Typ7. DieserWerkstofftypistmit20Massen-anteil in % Glasfasern verstrkt.7.2.1.8 Type 8. This material type is reinforced with10 % by mass glass fibres.7.2.1.8 Typ8. Die
22、serWerkstofftypistmit10Massen-anteil in % Glasfasern verstrkt.7.2.2 Group 2. This group describes material types,which are reinforced with glass fibres and glassbeads.7.2.2 Gruppe 2. Diese Gruppe umfasst Werkstoff-typen, die mit einer Mischung aus Glasfasern undGlaskugeln verstrkt sind. Copyright 20
23、09 General Motors Corporation All Rights ReservedPage 4 of 11 Issue No. 7 - February 2009PRD045 - VPRE ST G 10/03 GM EUROPE ENGINEERING STANDARDS QK 0027007.2.2.1 Type 1. This material type is glass fibres andglass spheres reinforced and its characteristic prop-erty is the low tendency to distortion
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- GMEQK0027002009PA6WITHGLASSFIBRESENGLISHGERMAN 玻璃纤维 聚酰胺 英语 德语 代替 GMEQK009997PDF

链接地址:http://www.mydoc123.com/p-756344.html