GEIA-STD-0007-2007 LOGISTICS PRODUCT DATA Version 01 Includes CD-ROM To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide Subscription customers can obtain one compU.pdf

《GEIA-STD-0007-2007 LOGISTICS PRODUCT DATA Version 01 Includes CD-ROM To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide Subscription customers can obtain one compU.pdf》由会员分享，可在线阅读，更多相关《GEIA-STD-0007-2007 LOGISTICS PRODUCT DATA Version 01 Includes CD-ROM To Purchase Call 1-800-854-7179 USA Canada or 303-397-7956 Worldwide Subscription customers can obtain one compU.pdf（328页珍藏版）》请在麦多课文档分享上搜索。

1、 GEIA STANDARD GEIA-STD-0007 Logistics Product Data GEIA-STD-0007 August 2007 GOVERNMENT ELECTRONICS AND INFORMATION TECHNOLOGY ASSOCIATION A Sector of the Electronic Industries Alliance Copyright Government Electronics failure modes, effects, and criticality analysis; and maintainability analysis T

2、he “B“ entities provide a description of the function of each item within the system; outline the maintenance concept to be utilized for design and support planning purposes; and identify any design conditions such as fail-safe requirements/environmental or nuclear hardness Copyright Government Elec

3、tronics one of the duties of a driver is emergency repair; a task within emergency repair is changing a flat tire). The task identification information in these entities is developed from the RCM analysis, maintainability analysis, and the maintenance task analysis. This information is completed to

4、the same indenture level as the R Functional LCN Type must always be coded “F“. When a functional and physical LCN are mapped through this entity, all data contained against the functional LCN shall migrate to the physical LCN (physical LCN data shall take precedence if data duplication has occurred

5、). After the data is migrated, data additions and updates for this item shall only occur against the physical LCN. Entity XG contains the following KEY elements: end_item_acronym_code 2040 physical_logistics_support_analysis_control_number 2970 physical_alternate_logistics_support_analysis_control_n

6、umber_code 1200 physical_logistics_support_analysis_control_number_type 2980 Entity XG contains the following elements: functional_logistics_support_analysis_control_number 2970 functional_alternate_logistics_support_analysis_control_number_code 1200 functional_logistics_support_analysis_control_num

7、ber_type 2980 Entity XH_Commercial_and_Government_Entity_data. This entity contains all Commercial and Government Entity (CAGE) codes and the CAGE addresses. A CAGE street, city, state, nation, or postal zone cannot be included without a CAGE name. Entity XH contains the following KEY elements: comm

8、ercial_and_government_entity_code 1520 Entity XH contains the following elements: commercial_and_government_entity_city 1510 commercial_and_government_entity_name 1530 commercial_and_government_entity_nation 1540 commercial_and_government_entity_postal_zone 1550 commercial_and_government_entity_stat

9、e 1560 commercial_and_government_entity_street 1570 Entity XI_Technical_Manual_Code_and_Number_Index_data. This entity contains a cross-reference of Technical Manual (TM) code to TM number(s). Entity XI contains the following Key element: technical_manual_code 5250 Entity XI contains the following e

10、lement: Copyright Government Electronics outline the maintenance concept to be utilized for design and support planning purposes; and, identify any design conditions such as fail safe requirements/environmental or nuclear hardness considerations imposed upon the system. The entities summarize the it

11、em reliability, maintainability, and related availability characteristics of the item resulting from the failure modes and effects, criticality, and maintainability analyses, and accommodate a narrative description of any analysis related to the potential redesign of an item. 2.3.2 Graphical Represe

12、ntation See Figure 3 for the graphical description of the Reliability Requirements and Analysis functional area. Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IH

13、S-,-,-GEIA-STD-0007 19 Figure 3 - Reliability Requirements and Analysis 2.3.3 Entity Descriptions Entity BA_Reliability_Availability_and_Maintainability_Characteristics_data. This entity contains logistics considerations, maintenance, and reliability characteristics of the item under analysis. This

14、entity contains narrative information associated with logistics considerations. For a given entity instance of information, the following cross-element edits apply to entity BA: a) The Reliability, Availability and Maintainability (RAM) area can only be used if a (Y) is entered in the RAM Indicator

15、attribute of Entity XB. Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-GEIA-STD-0007 20 b) Fault Isolation Percent Failure Group 1 is not allowed without

16、Fault Isolation Ambiguity Group 1. c) The combination in (b) is not allowed without Built in Test Detection Level Percent group 1. d) That which applies for the combinations in Group 1 (b, c) also applies to the combination in group 2. e) Wearout Life and Wearout Life MB, both must be blank, or both

17、 must have entries. Entity BA contains the following KEY elements: end_item_acronym_code 2040 logistics_support_analysis_control_number 2970 alternate_logistics_support_analysis_control_number_code 1200 logistics_support_analysis_control_number_type 2980 Entity BA contains the following elements: bu

18、ilt_in_test_cannot_duplicate_percentage 1350 built_in_test_detectability_level_percentage_1 1360 built_in_test_detectability_level_percentage_2 1360 built_in_test_retest_ok_percent 1370 conversion_factor 1670 failure_rate_data_source 2230 fault_isolation_ambiguity_group_1 2260 fault_isolation_ambigu

19、ity_group_2 2260 fault_isolation_percent_failure_group_1 2270 fault_isolation_percent_failure_group_2 2270 logistics_considerations_accessibility 2910 logistics_considerations_connectors 2910 logistics_considerations_corrosion_rust_control 2910 logistics_considerations_design_for_self_protection 291

20、0 logistics_considerations_fault_location 2910 logistics_considerations_labeling 2910 logistics_considerations_maintenance_ease 2910 logistics_considerations_packaging_and_transportation 2910 logistics_considerations_safety 2910 logistics_considerations_skills 2910 logistics_considerations_standardi

21、zation 2910 logistics_considerations_test_points 2910 logistics_considerations_training 2910 minimum_equipment_list_indicator 3440 pilot_rework_overhaul_candidate 3930 security_clearance 4660 support_concept 5000 wearout_life 5820 wearout_life_measurement_base 3380 reliability_availability_and_maint

22、ainability_item_function_narrative 3510 Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-GEIA-STD-0007 21 reliability_availability_and_maintainability_maint

23、enance_concept_narrative 3510 reliability_availability_and_maintainability_minimum_equipment_list_narrative 3510 reliability_availability_and_maintainability_qualitative_and_quantitative_maintainability_ requirements_narrative 3510 reliability_availability_and_maintainability_maintenance_plan_ration

24、ale_narrative 3510 logistics_considerations_for_standardization_narrative 3510 logistics_considerations_for_accessibility_narrative 3510 logistics_considerations_for_maintenance_ease_narrative 3510 logistics_considerations_for_safety_narrative 3510 logistics_considerations_for_test_points_narrative

25、3510 logistics_considerations_for_skills_narrative 3510 logistics_considerations_for_training_narrative 3510 logistics_considerations_for_connectors_for_ease_of_removal_narrative 3510 logistics_considerations_for_packaging_and_transportation_narrative 3510 logistics_considerations_for_fault location

26、_narrative 3510 logistics_considerations_for_labeling_narrative 3510 logistics_considerations_for_design_for_self_protection_narrative 3510 logistics_considerations_for_corrosion_and rust_control_narrative 3510 system_redesign_standardization_narrative 3510 system_redesign_accessibility_narrative 35

27、10 system_redesign_maintenance_ease_narrative 3510 system_redesign_safety_narrative 3510 system_redesign_test_points_narrative 3510 system_redesign_skills_narrative 3510 system_redesign_training_narrative 3510 system_redesign_connectors_for_ease_of_removal_narrative 3510 system_redesign_packaging_an

28、d_transportation_narrative 3510 system_redesign_fault_location_narrative 3510 system_redesign_labeling_narrative 3510 system_redesign_for_self_protection_narrative 3510 system_redesign_corrosion_and_rust_control_narrative 3510 Entity BD_Reliability_Availability_and_Maintainability_Indicator_Characte

29、ristics_data. This entity contains reliability and maintainability characteristics of the item under analysis categorized by comparative analysis, allocated, predicted, or measured values. For a given LCN, ALC, and LCN Type combination, each different measurement base must remain constant for all RA

30、M Indicator Codes. For a given entity instance of information, the following cross-element edits apply to entity BD: a) Failure Rate and Failure Rate MB must either both be blank, or both have entries. b) Percentile is not allowed without a Maximum Time to Repair. c) Mean Time Between Failures Opera

31、tional and Mean Time Between Failures Operational MB must either both be blank, or both have entries. Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-GEIA-

32、STD-0007 22 d) Mean Time Between Failures Technical and Mean Time Between Failures Technical MB must either both be blank, or both have entries. e) Mean Time Between Maintenance Actions Operational and Mean Time Between Maintenance Actions Operational MB must either both be blank, or both have entri

33、es. f) Mean Time Between Maintenance Actions Technical and Mean Time Between Maintenance Actions Technical MB must either both be blank, or both have entries. g) Mean Time Between Maintenance Induced and Mean Time Between Maintenance Induced MB must either both be blank, or both have entries. h) Mea

34、n Time Between Maintenance Inherent and Mean Time Between Maintenance Inherent MB must either both be blank, or both have entries. i) Mean Time Between Maintenance No Defect and Mean Time Between Maintenance No Defect MB must either both be blank, or both have entries. j) Mean Time Between Preventiv

35、e Maintenance and Mean Time Between Preventive Maintenance MB must either both be blank, or both have entries. k) Mean Time Between Removals and Mean Time Between Removals MB must either both be blank, or both have entries. l) Mean Time Between System Aborts and Mean Time Between System Aborts MB mu

36、st either both be blank, or both have entries. m) Mean Time Between Effective Function Failures and Mean Time Between Effective Function Failures MB must either both be blank, or both have entries. n) Mean Time Between Noneffective Function Failures and Mean Time Between Nonffective Function Failure

37、s MB must either both be blank, or both have entries. o) Achieved Availability shall be calculated based on Mean Time Between Failure Technical (Entity BD), Mean Time Between Maintenance - No Defect (Entity BD), Mean Time Between Preventive Maintenance (Entity BD), Elapsed Time (Entity A), and Task

38、Frequency (CA). A change in any of these variables shall result in an update of the Achieved Availability (Entity BD). p) Inherent Availability shall be calculated based on Mean Time Between Failures Technical (Entity BD) and Mean Time To Repair Technical (Entity BD). A change in any of these variab

39、les shall result in an update of the Inherent Availability (Entity BD). Entity BD contains the following KEY elements: end_item_acronym_code 2040 logistics_support_analysis_control_number 2970 alternate_logistics_support_analysis_control_number_code 1200 logistics_support_analysis_control_number_typ

40、e 2980 reliability_availability_and_maintainability_indicator_code 4420 Entity BD contains the following elements: achieved_availability 1010 failure_rate 2240 failure_rate_measurement_base 3380 Copyright Government Electronics & Information Technology Association Provided by IHS under license with GEIA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-