FORD WSS-M4C119-A-2015 FUEL DIESEL INITIAL FILL ULSD TO BE USED WITH FORD WSS-M99P1111-A .pdf

《FORD WSS-M4C119-A-2015 FUEL DIESEL INITIAL FILL ULSD TO BE USED WITH FORD WSS-M99P1111-A .pdf》由会员分享，可在线阅读，更多相关《FORD WSS-M4C119-A-2015 FUEL DIESEL INITIAL FILL ULSD TO BE USED WITH FORD WSS-M99P1111-A .pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION FUEL, DIESEL, INITIAL FILL, ULSD WSS-M4C119-A 1. SCOPE The material defined by this specification is a middle distillate petroleum product containing normal commercial additives. 2. APPLICATION This specification was released originally for material used as initia

2、l fill fuel for diesel engines in passenger cars and trucks. 3. REQUIREMENTS This material must meet the requirements of ASTM D975 Standard Specification for Diesel Fuel Oils plus the following: 3.1 APPROVED SOURCES This specification requires the use of approved sources. Only the sources identified

3、 on the Ford Approved Source List (ASL) can be used when this specification is listed on the drawing, CAD file, or other documents. The list of approved sources is located within Ford at or available externally through a Ford Materials Engineer. The approved material for this specification is ULS D

4、iesel CP-36 from Shell Canada Products LTD. 3.2 CETANE NUMBER 44 min 3.3 SULFUR 15 ppm max (ASTM D5453/ ISO 14596) 3.4 CLOUD POINT - 25 C max (ISO 3015/ ASTM D2500) (Oct Mar) 3.5 FAME CONTENT 5.0 % volume max (EN 14078/ ASTM D7371) 4. GENERAL INFORMATION The information given below is provided for c

5、larification and assistance in meeting the requirements of this specification. Contact for questions concerning Engineering Material Specifications. 4.1 FLAMMABILITY This material represents a potential fire hazard. The Manufacturing Engineering Department or other responsible activity shall notify

6、 both the Security and Safety Units of its presence to assure that proper fire precautions are provided. The location in which it is used or stored shall be included in the notifications. Date Action Revisions Rev. 02 2015 08 12 Revised/A-Status Reactivated, See revision summary C. Richardson, NA 20

7、10 08 26 N-STATUS No replacement named D. DiGregorio, NA 1997 11 10 Activated M. Riley Controlled document at www.MATS Copyright 2015, Ford Global Technologies, LLC Page 1 of 2 ENGINEERING MATERIAL SPECIFICATION WSS-M4C119-A 4.2 SAMPLING AND SUBMISSION OF SAMPLES (ISO 3170/3171, ASTM D4057 / D4177)

8、4.3 Quality Control records must be made available to Fuels and Lubricants Engineering upon request. 4.4 APPROVAL OF MATERIALS Suppliers desiring approval of their materials shall first obtain an expression of interest from Purchasing, Design or Product Development, and Materials Engineering. The su

9、pplier shall submit a completed copy of their laboratory test reports, signed by a qualified and authorized representative of the test facility, demonstrating full compliance with all the requirements of the Material Specification. Tested material samples must be available for review upon request an

10、d kept for a minimum of one year. Upon request, the supplier will review the associated quality control documents (Process Failure Mode and Effects Analysis, Control Plans, Certification testing) with Ford. 4.5 SUPPLIERS ONGOING RESPONSIBILITY All materials must be equivalent in all characteristics

11、to the material upon which approval was originally granted. Prior to making any changes to the material originally approved, whether or not such changes affect the materials ability to meet the specification requirements, the supplier shall notify the affected Supplier Technical Assistance (STA), Pu

12、rchasing, and Materials Engineering activities of the proposed changes (with reasons) by submission of a completed Suppliers Request for Engineering Approval, SREA. For parts and components using Ford Engineering Material Specifications, all samples tested to the specifications for Design Verificati

13、on (DV), Production Verification (PV) and Production Part Approval Process (PPAP) sign off must be kept until Job 1. 4.6 RESTRICTED SUBSTANCE MANAGEMENT STANDARD Substance restrictions imposed by regulations or Company direction applies to the materials addressed by this document. The restrictions a

14、re identified in the Restricted Substance Management Standard WSS-M99P9999-A1 which is updated yearly. It is the suppliers responsibility to comply with this standard on a continuing basis through IMDS and or GMAP reporting. 5. SUMMARY OF REVISIONS 2015 08 12 Revised Title. Replaced 42Cetane with ULSD Revised scope. Revised sulfur from mass to ppm. Added Flame content requirement. Removed many requirements 2004 04 27 Revised Para 3.0 inserted; paras 3.1, 3.19 & 4 deleted Copyright 2015, Ford Global Technologies, LLC Page 2 of 2