FORD WSK-M4D913-A-2010 STYRENE ACRYLONITRILE (SAN) TRANSPARENT ANTISTATIC MODIFIED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用抗静电、透明苯乙烯-丙烯腈共聚物(SAN)改性成型料 .pdf

《FORD WSK-M4D913-A-2010 STYRENE ACRYLONITRILE (SAN) TRANSPARENT ANTISTATIC MODIFIED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用抗静电、透明苯乙烯-丙烯腈共聚物(SAN)改性成型料 .pdf》由会员分享，可在线阅读，更多相关《FORD WSK-M4D913-A-2010 STYRENE ACRYLONITRILE (SAN) TRANSPARENT ANTISTATIC MODIFIED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用抗静电、透明苯乙烯-丙烯腈共聚物(SAN)改性成型料 .pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 01 06 N-STATUS No replacement named A. Pan, APA 2006 07 17 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.3, 3.9, 3.10 particles larger than 0.06 mm are not permitted - according to inclusion count by using a pergamin master plate perforated w

2、ith round hole perforations with various square dimmensions as defined on the reference standard. Test specimen: injection molded plaques 50 x 90 x 2.6 mm, distance of evaluation: 300 mm under north sky light according to FLTM BI 109-01, 4 specimens per lot minimum. Reference Standard: SQUARE MILLIMETERS 0.02 0.05 0.10 0.20 0.30 0.40 0.60 0.80 1.00 2.00 5.6 RECYCLING CODE SAN ENGINEERING MATERIAL SPECIFICATIONWSK-M4D913-APrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 5 of 5