FORD WFPP001-2014 UTILITY FASTENER DRAWING REQUIREMENTS.pdf

《FORD WFPP001-2014 UTILITY FASTENER DRAWING REQUIREMENTS.pdf》由会员分享，可在线阅读，更多相关《FORD WFPP001-2014 UTILITY FASTENER DRAWING REQUIREMENTS.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 WORLDWIDE FASTENER STANDARD 2014 06 30 Printed copies are uncontrolled Copyright 2014, Ford Global Technologies, LLC. Page 1 of 1 WORLDWIDE FASTENER PRACTICE/PROCEDURE 001 - UTILITY FASTENER DRAWING REQUIREMENTS Foreword: During 2006 a series of meetings with CAD & Drafting Committee concluded that

2、 the requirements of PP001 were not being consistently followed and were misunderstood. The principal reason for this was that CAD & Drafting requirements are contained in the Ford Motor Company Cad & Drafting Standards. Cad & Drafting people are familiar with this document but were not familiar wit

3、h the requirements of PP001. In order to resolve this issue and ensure that all CAD & Drafting requirements are maintained within a single global document, the requirements of PP001 were included in Section F-7 of the CAD & Drafting Standards. Section F-7 of the CAD & drafting Standards was released on December 31, 2006, this release made the requirements of PP001 redundant. FMC Engineering CAD & Drafting Standard F7 via: C3PNGMethods The 2014 June issue of PP001 has been provided to clarify where the current requirements are published.