FORD M2C68-A (A)-2009 PROCESSING AID OIL《加工助剂油》.pdf

《FORD M2C68-A (A)-2009 PROCESSING AID OIL《加工助剂油》.pdf》由会员分享，可在线阅读，更多相关《FORD M2C68-A (A)-2009 PROCESSING AID OIL《加工助剂油》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 NON-PRODUCTION MATERIAL SPECIFICATION Material Name Specification Number Date Action Changes 2009 04 14 N-STATUS No Replacement Named L. Sinclair, FNA 1991 12 01 Page 1 of 1 PROCESSING AID OIL M2C68-A(A) NOT TO BE USED FOR NEW DESIGN 1. SCOPE: The material defined by this standard is a napthenic oi

2、l suitable for use as a rubber processing aid. 2. APPLICATION: This material was originally released as a lubricant for the assembly of rubber driveshaft elements. 3. REQUIREMENTS: 3.1 VISCOSITY: 100F (38C): 31.9-34.1 cSt (150-160 SUS) (ASTM D 88) 3.2 API GRAVITY: 20.2-22.5 (ASTM D 287) 3.3 FLASH PO

3、INT: 300F (149C) min (ASTM D 92) 3.4 FIRE POINT: 360F (182C) min (ASTM D 92) 3.5 POUR POINT: -20F (-29C) max (ASTM D 97) 3.6 ANILINE POINT: 154-160F (67.8-71.1C) (ASTM D 611) 4. STANDARD PARAGRAPHS: The following standard paragraphs as defined in Manufacturing Standard MCX, are herewith made a part of this standard: C1, P1, P2, P3, R1, R2.