FORD ESK-M99J323-A1-2012 HARDENER TWO PACK 75% SOLIDS EXTERIOR FOR PRIMER TO BE USED WITH FORD WSS-M99P1111-A 《两包含75%固体的外部底漆固化剂 与福特WSS-M99P1111-A 一起使用》.pdf

《FORD ESK-M99J323-A1-2012 HARDENER TWO PACK 75% SOLIDS EXTERIOR FOR PRIMER TO BE USED WITH FORD WSS-M99P1111-A 《两包含75%固体的外部底漆固化剂 与福特WSS-M99P1111-A 一起使用》.pdf》由会员分享，可在线阅读，更多相关《FORD ESK-M99J323-A1-2012 HARDENER TWO PACK 75% SOLIDS EXTERIOR FOR PRIMER TO BE USED WITH FORD WSS-M99P1111-A 《两包含75%固体的外部底漆固化剂 与福特WSS-M99P1111-A 一起使用》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev 02 2012 02 16 N Status No replacements named N. Benipal, NA 2005 08 30 Revised Inserted 3.0; deleted 3.1, 3.2, 3.3, 3.7 and 4 1984 08 28 Released SM/EQ 5486 TP Controlled document at www.MATS Copyright 2012, Ford Global Technologies, LLC

2、Page 1 of 1 HARDENER, TWO PACK, 75% SOLIDS, EXTERIOR, FOR PRIMER ESK-M99J323-A1 HARDENER, TWO PACK, 75% SOLIDS, EXTERIOR, FOR TOPCOAT ESK-M99J323-A2 NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are polyisocyanate hardeners. 2. APPLICATION These specifications

3、were released originally for materials used as hardener for two pack high flexible paint materials for plastic substrates. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materi

4、als (WSS-M99P1111-A). 3.4 COMPOSITION Modified hexamethylene diisocyanate in organic solvents. 3.5 MATERIAL PROPERTIES 3.5.1 Non-volatile 74 +/- 1 % (FLTM BI 102-01) 3.5.2 Density see Initial Sample +/- 0.05 g/mL (ASTM D 1475) 3.5.3 Viscosity as supplied see Initial Sample +/- 10 s (FLTM BI 111-01)

5、3.5.4 Storage Stability: 90 days During a storage of 90 days between 5 and 32 C temperature the material as supplied shall not change properties and the aged material must pass all specification requirements. 3.6 QUALITY The hardeners must be compatible with all related paint materials. Paint materials used in connection with these hardeners must meet all requirements of the affected paint material specification.