FORD ESF-M6B5-A-2002 INK MARKING TO BE USED WITH FORD WSS-M99P1111-A 《标记墨水 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD ESF-M6B5-A-2002 INK MARKING TO BE USED WITH FORD WSS-M99P1111-A 《标记墨水 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD ESF-M6B5-A-2002 INK MARKING TO BE USED WITH FORD WSS-M99P1111-A 《标记墨水 与标准FORD WSS-M99P1111-A一起使用 》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATION Material Name Specification Number Date Action Revisions 2002 08 14 Revised Updated and renumbered 1978 06 12 Metricated and Retyped CF4H-RD 567168-21 1963 03 27 Released ECR-408448 CF6-199327 #1 Printed copies are uncontrolled Page 1 of 2 Copyright 2002, Ford Glo

2、bal Technologies, Inc. INK, MARKING ESF-M6B5-A 1. SCOPE The material defined by this standard is a semi-paste type, quick drying marking ink with good adhesive properties. 2. APPLICATION This specification was released originally for material used for marking identification on starting motor, voltag

3、e regulators, alternators, etc. 3. REQUIREMENTS 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 SOLIDS, min 35.0 % (FLTM BI 102-01) 3.3 VEHICLE Synthetic resin s

4、olution solids, min 25.0 % 3.4 COLOR To be specified on Engineering Drawing. 3.5 STABILITY There shall be no settling, livering or curdling of the material after being stored for 30 days in a 3/4 filled sealed container at 23 +/- 2 C. ENGINEERING MATERIAL SPECIFICATION ESF-M6B5-A Page 2 of 2 Copyrig

5、ht 2002, Ford Global Technologies, Inc. 3.6 TOXICITY The material shall not contain any benzol (benzene), aniline oil, or hydrolizable chlorinated hydrocarbons, nor have an obnoxious or objectionable odor. 3.7 QUALITY The material shall be free from dirt, lumps and skins, shall adhere readily to painted and unpainted surfaces, and be miscible with the recommended thinner.