FORD ESA-M99D52-A-2008 POLYETHYLENE FILM LOW DENSITY - STRETCH TO BE USED WITH FORD WSS-M99P1111-A 《低密度聚乙烯薄膜 伸展性能 与标准FORD WSS-M99P1111-A一起使用 》.pdf

《FORD ESA-M99D52-A-2008 POLYETHYLENE FILM LOW DENSITY - STRETCH TO BE USED WITH FORD WSS-M99P1111-A 《低密度聚乙烯薄膜 伸展性能 与标准FORD WSS-M99P1111-A一起使用 》.pdf》由会员分享，可在线阅读，更多相关《FORD ESA-M99D52-A-2008 POLYETHYLENE FILM LOW DENSITY - STRETCH TO BE USED WITH FORD WSS-M99P1111-A 《低密度聚乙烯薄膜 伸展性能 与标准FORD WSS-M99P1111-A一起使用 》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2008 02 06 N-STATUS No replacement named G. Kowalski 2006 11 16 Revised Inserted 3.0; Deleted 3.1, 3.2, 3.4 & 4 1987 01 12 Released CDQ2-626990-1 K. Gribble, C. Boise Printed copies are uncontrolled Copyright 2008, Ford Global Technologies, LL

2、C Page 1 of 1 POLYETHYLENE FILM, LOW DENSITY - STRETCH ESA-M99D52-A NOT TO BE USED FOR NEW DESIGN 1. SCOPE The material defined by this specification is a linear low density polyethylene overwrap stretch film. 2. APPLICATION This specification was released originally for material used for a protecti

3、ve cover over leather wrapped steering wheels during shipment. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.3 The polyethylene stretch wrap must meet the requirements of ASTM D 2103 13410.