ETSI TS 136 521-1-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) conformance specification Radio transmission and reception Part 1 Conformance tes.pdf

《ETSI TS 136 521-1-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) conformance specification Radio transmission and reception Part 1 Conformance tes.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 136 521-1-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) conformance specification Radio transmission and reception Part 1 Conformance tes.pdf（2885页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 136 521-1 V13.1.0 (2016-05) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 1: Conformance testing (3GPP TS 36.521-1 version 13.1.0 Release 13) TECHNICAL SPECIFICATION ETSI ETSI TS 136 521-1 V13.

2、1.0 (2016-05)13GPP TS 36.521-1 version 13.1.0 Release 13Reference RTS/TSGR-0536521-1vd10 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la So

3、us-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall

4、 not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Se

5、cretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present documen

6、t, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by writt

7、en permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTS

8、TMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI

9、 TS 136 521-1 V13.1.0 (2016-05)23GPP TS 36.521-1 version 13.1.0 Release 13Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members an

10、d non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/)

11、. Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the prese

12、nt document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being refe

13、rences to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will no

14、t“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 521-1 V13.1.0 (2016-05)33GPP TS 36.521-

15、1 version 13.1.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 57g3Introduction 57g31 Scope 58g32 References 59g33 Definitions, symbols and abbreviations . 60g33.1 Definitions 60g33.2 Symbols 61g33.3 Abbreviations . 64g34 General . 66g34.1 Cat

16、egorization of test requirements in CA, UL-MIMO, Dual Connectivity, ProSe and UE category 0 67g34.2 RF requirements in later releases . 68g35 Frequency bands and channel arrangement 69g35.1 General . 69g35.2 Operating bands 69g35.2A Operating bands for CA . 70g35.2B Operating bands for UL-MIMO . 78g

17、35.2C Operating bands for Dual Connectivity 78g35.2D Operating bands for ProSe 80g35.3 TXRX frequency separation . 80g35.3A TXRX frequency separation for CA . 81g35.4 Channel arrangement 81g35.4.1 Channel spacing 81g35.4.1A Channel spacing for CA 81g35.4.2 Channel bandwidth . 81g35.4.2.1 Channel ban

18、dwidths per operating band . 82g35.4.2A Channel bandwidth for CA . 84g35.4.2A.1 Channel bandwidths per operating band for CA . 86g35.4.2B Channel bandwidth for UL-MIMO . 102g35.4.2B.1 Channel bandwidths per operating band for UL- MIMO 102g35.4.2D Channel bandwidth for ProSe . 102g35.4.2D.1 Channel b

19、andwidths per operating band for ProSe . 102g35.4.3 Channel raster . 103g35.4.3A Channel raster for CA . 103g35.4.4 Carrier frequency and EARFCN . 103g36 Transmitter Characteristics . 105g36.1 General . 105g36.2 Transmit power 105g36.2.1 Void 105g36.2.2 UE Maximum Output Power 106g36.2.2.1 Test purp

20、ose 106g36.2.2.2 Test applicability . 106g36.2.2.3 Minimum conformance requirements . 106g36.2.2.4 Test description . 108g36.2.2.4.1 Initial condition . 108g36.2.2.4.2 Test procedure . 109g36.2.2.4.3 Message contents. 109g36.2.2.5 Test requirements 109g36.2.2_1 Maximum Output Power for HPUE . 111g36

21、.2.2_1.1 Test purpose 111g3ETSI ETSI TS 136 521-1 V13.1.0 (2016-05)43GPP TS 36.521-1 version 13.1.0 Release 136.2.2_1.2 Test applicability . 111g36.2.2_1.3 Minimum conformance requirements . 111g36.2.2_1.4 Test description . 111g36.2.2_1.5 Test requirements 112g36.2.2A UE Maximum Output Power for CA

22、 112g36.2.2A.1 UE Maximum Output Power for CA (intra-band contiguous DL CA and UL CA) 112g36.2.2A.1.1 Test purpose 112g36.2.2A.1.2 Test applicability . 113g36.2.2A.1.3 Minimum conformance requirements 113g36.2.2A.1.4 Test description . 113g36.2.2A.1.5 Test Requirements . 115g36.2.2A.2 UE Maximum Out

23、put Power for CA (inter-band DL CA and UL CA) 115g36.2.2A.2.1 Test purpose 115g36.2.2A.2.2 Test applicability . 116g36.2.2A.2.3 Minimum conformance requirements 116g36.2.2A.2.4 Test description . 116g36.2.2A.2.5 Test Requirements . 119g36.2.2A.3 UE Maximum Output Power for CA (intra-band non-contigu

24、ous DL CA and UL CA) 120g36.2.2B UE Maximum Output Power for UL-MIMO 121g36.2.2B.1 Test purpose 121g36.2.2B.2 Test applicability . 121g36.2.2B.3 Minimum conformance requirements . 121g36.2.2B.4 Test description . 123g36.2.2B.4.1 Initial condition . 123g36.2.2B.4.2 Test procedure . 124g36.2.2B.4.3 Me

25、ssage contents. 124g36.2.2B.5 Test requirements 124g36.2.2E UE Maximum Output Power for UE category 0 . 126g36.2.2E.1 Test purpose 126g36.2.2E.2 Test applicability . 126g36.2.2E.3 Minimum conformance requirements . 126g36.2.2E.4 Test description . 126g36.2.2E.4.3 Message contents . 127g36.2.2E.5 Tes

26、t requirements 127g36.2.3 Maximum Power Reduction (MPR) . 128g36.2.3.1 Test purpose 129g36.2.3.2 Test applicability . 129g36.2.3.3 Minimum conformance requirements . 129g36.2.3.4 Test description . 129g36.2.3.4.1 Initial condition . 129g36.2.3.4.2 Test procedure . 131g36.2.3.4.3 Message contents. 13

27、1g36.2.3.5 Test requirements 131g36.2.3_1 Maximum Power Reduction (MPR) for HPUE 133g36.2.3_1.1 Test purpose 133g36.2.3_1.2 Test applicability . 133g36.2.3_1.3 Minimum conformance requirements . 133g36.2.3_1.4 Test description . 134g36.2.3_1.5 Test requirements 134g36.2.3_2 Maximum Power Reduction (

28、MPR) for Multi-Cluster PUSCH . 134g36.2.3_2.1 Test purpose 134g36.2.3_2.2 Test applicability . 134g36.2.3_2.3 Minimum conformance requirements . 135g36.2.3_2.4 Test description . 135g36.2.3_2.4.1 Initial condition . 135g36.2.3_2.4.2 Test procedure . 136g36.2.3_2.4.3 Message contents. 136g36.2.3_2.5

29、Test requirements 136g36.2.3_3 Maximum Power Reduction (MPR) for UL 64QAM . 137g36.2.3_3.1 Test purpose 138g36.2.3_3.2 Test applicability . 138g36.2.3_3.3 Minimum conformance requirements . 138g3ETSI ETSI TS 136 521-1 V13.1.0 (2016-05)53GPP TS 36.521-1 version 13.1.0 Release 136.2.3_3.4 Test descrip

30、tion . 138g36.2.3_3.4.1 Initial condition . 138g36.2.3_3.4.2 Test procedure . 139g36.2.3_3.4.3 Message contents. 139g36.2.3_3.5 Test requirements 140g36.2.3_4 Maximum Power Reduction (MPR) for Multi-Cluster PUSCH with UL 64QAM . 142g36.2.3_4.1 Test purpose 142g36.2.3_4.2 Test applicability . 142g36.

31、2.3_4.3 Minimum conformance requirements . 142g36.2.3_4.4 Test description . 143g36.2.3_4.4.1 Initial condition . 143g36.2.3_4.4.2 Test procedure . 144g36.2.3_4.4.3 Message contents. 144g36.2.3_4.5 Test requirements 144g36.2.3A Maximum Power Reduction (MPR) for CA . 145g36.2.3A.1 Maximum Power Reduc

32、tion (MPR) for CA (intra-band contiguous DL CA and UL CA) . 145g36.2.3A.1.1 Test purpose 145g36.2.3A.1.2 Test applicability . 145g36.2.3A.1.3 Minimum conformance requirements 145g36.2.3A.1.4 Test description . 146g36.2.3A.1.5 Test Requirements . 148g36.2.3A.1_1 Maximum Power Reduction (MPR) for CA (

33、intra-band contiguous DL CA and UL CA) for UL 64QAM . 150g36.2.3A.1_1.1 Test purpose 150g36.2.3A.1_1.2 Test applicability . 150g36.2.3A.1_1.3 Minimum conformance requirements 150g36.2.3A.1_1.4 Test description . 151g36.2.3A.1_1.5 Test requirement 153g36.2.3A.2 Maximum Power Reduction (MPR) for CA (i

34、nter-band DL CA and UL CA) . 153g36.2.3A.2.1 Test purpose 153g36.2.3A.2.2 Test applicability . 153g36.2.3A.2.3 Minimum conformance requirements 154g36.2.3A.2.4 Test description . 154g36.2.3A.2.5 Test Requirements . 157g36.2.3A.3 Maximum Power Reduction (MPR) for CA (intra-band non-contiguous DL CA a

35、nd UL CA) . 159g36.2.3A.3.1 Test purpose 159g36.2.3A.3.2 Test applicability . 159g36.2.3A.3.3 Minimum conformance requirements 159g36.2.3A.3.4 Test description . 160g36.2.3A.3.5 Test Requirements . 162g36.2.3B Maximum Power Reduction (MPR) for UL-MIMO . 162g36.2.3B.1 Test purpose 162g36.2.3B.2 Test

36、applicability . 162g36.2.3B.3 Minimum conformance requirements . 162g36.2.3B.4 Test description . 163g36.2.3B.4.1 Initial condition . 163g36.2.3B.4.2 Test procedure . 164g36.2.3B.4.3 Message contents. 165g36.2.3B.5 Test requirements 165g36.2.3E Maximum Power Reduction (MPR) for UE category 0 167g36.

37、2.3E.1 Test purpose 167g36.2.3E.2 Test applicability . 167g36.2.3E.3 Minimum conformance requirements . 167g36.2.3E.4 Test description . 168g36.2.3E.4.1 Initial condition . 168g36.2.3E.4.2 Test procedure . 168g36.2.3E.4.3 Message contents. 168g36.2.3E.5 Test requirements 168g36.2.4 Additional Maximu

38、m Power Reduction (A-MPR) . 169g36.2.4.1 Test purpose 169g36.2.4.2 Test applicability . 169g36.2.4.3 Minimum conformance requirements . 170g3ETSI ETSI TS 136 521-1 V13.1.0 (2016-05)63GPP TS 36.521-1 version 13.1.0 Release 136.2.4.4 Test description . 176g36.2.4.4.1 Initial condition . 176g36.2.4.4.2

39、 Test procedure . 196g36.2.4.4.3 Message contents. 197g36.2.4.5 Test requirements 201g36.2.4_1 Additional Maximum Power Reduction (A-MPR) for HPUE 223g36.2.4_1.2 Test applicability . 223g36.2.4_1.3 Minimum conformance requirements . 223g36.2.4_1.4 Test description . 223g36.2.4_1.5 Test requirements

40、224g36.2.4_2 Additional Maximum Power Reduction (A-MPR) for UL 64QAM . 224g36.2.4_2.1 Test purpose 225g36.2.4_2.2 Test applicability . 225g36.2.4_2.3 Minimum conformance requirements . 225g36.2.4_2.4 Test description . 225g36.2.4_2.4.1 Initial condition . 225g36.2.4_2.4.2 Test procedure . 237g36.2.4

41、_2.4.3 Message contents. 237g36.2.4_2.5 Test requirements 237g36.2.4_3 Additional Maximum Power Reduction (A-MPR) with PUSCH frequency hopping 247g36.2.4_3.1 Test purpose 247g36.2.4_3.2 Test applicability . 247g36.2.4_3.3 Minimum conformance requirements 247g36.2.4_3.4 Test description . 247g36.2.4_

42、3.5 Test requirements 249g36.2.4A Additional Maximum Power Reduction (A-MPR) for CA . 249g36.2.4A.1 Additional Maximum Power Reduction (A-MPR) for CA (intra-band contiguous DL CA and UL CA) 249g36.2.4A.1.1 Test purpose 250g36.2.4A.1.2 Test applicability . 250g36.2.4A.1.3 Minimum conformance requirem

43、ents 250g36.2.4A.1.3.5 A-MPR for CA_NS_05 for CA_38C . 253g36.2.4A.1.3.6 A-MPR for CA_NS_06 for CA_7C . 254g36.2.4A.1.3.7 A-MPR for CA_NS_07 for CA_39C . 255g36.2.4A.1.4 Test description . 255g36.2.4A.1.5 Test requirements 262g36.2.4A.1_1 Additional Maximum Power Reduction (A-MPR) for CA (intra-band

44、 contiguous DL CA and UL CA) for UL 64QAM 267g36.2.4A.1_1.1 Test purpose 267g36.2.4A.1_1.2 Test applicability . 267g36.2.4A.1_1.3 Minimum conformance requirements 268g36.2.4A.1_1.3.5 A-MPR for CA_NS_05 for CA_38C . 271g36.2.4A.1_1.3.6 A-MPR for CA_NS_06 for CA_7C . 272g36.2.4A.1_1.3.7 A-MPR for CA_N

45、S_07 for CA_39C . 273g36.2.4A.1_1.3.8 A-MPR for CA_NS_08 for CA_42C . 274g36.2.4A.1_1.4 Test description . 274g36.2.4A.2 Additional Maximum Power Reduction (A-MPR) for CA (inter-band DL CA and UL CA) . 284g36.2.4A.2.1 Test purpose 284g36.2.4A.2.2 Test applicability . 285g36.2.4A.2.3 Minimum conforma

46、nce requirements 285g36.2.4A.2.4 Test description . 285g36.2.4A.2.4.1 Initial conditions 285g36.2.4A.2.4.2 Test procedure 289g36.2.4A.2.4.3 Message contents . 289g36.2.4A.2.5 Test requirements 290g36.2.4A.3 Additional Maximum Power Reduction (A-MPR) for CA (intra-band non-contiguous DL CA and UL CA)

47、 . 292g36.2.4B Additional Maximum Power Reduction (A-MPR) for UL-MIMO. 293g36.2.4B.1 Test purpose 293g36.2.4B.2 Test applicability . 293g36.2.4B.3 Minimum conformance requirements . 293g36.2.4B.4 Test description . 299g3ETSI ETSI TS 136 521-1 V13.1.0 (2016-05)73GPP TS 36.521-1 version 13.1.0 Release

48、 136.2.4B.4.1 Initial condition . 299g36.2.4B.4.2 Test procedure . 315g36.2.4B.4.3 Message contents. 315g36.2.4B.5 Test requirements 318g36.2.4E Additional Maximum Power Reduction (A-MPR) for UE category 0 . 332g36.2.4E.1 Test purpose 332g36.2.4E.2 Test applicability . 333g36.2.4E.3 Minimum conforma

49、nce requirements . 333g36.2.4E.4 Test description . 333g36.2.4E.4.1 Initial condition . 333g36.2.4E.4.2 Test procedure . 337g36.2.4E.4.3 Message contents. 337g36.2.4E.5 Test requirements 338g36.2.5 Configured UE transmitted Output Power 344g36.2.5.1 Test purpose 344g36.2.5.2 Test applicability . 344g36.2.5.3 Minimum conformance requirements . 344g36.2.5.4 Test description . 353g36.2.5.4.1 Initial conditions 353g36.2.5.4.2 Test procedure . 354g36.2.5.4.3 Message contents. 354g36.2.5.5 Test requirement . 355g36.2.5_1 Configured UE transmitted Output Power for HPUE . 355g36.2.