ETSI TS 127 007-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE AT command set for User Equipment (UE) (V14 5.pdf

《ETSI TS 127 007-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE AT command set for User Equipment (UE) (V14 5.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 127 007-2017 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) LTE AT command set for User Equipment (UE) (V14 5.pdf（349页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 127 007 V14.3.0 (2017-04) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); LTE; AT command set for User Equipment (UE) (3GPP TS 27.007 version 14.3.0 Release 14) TECHNICAL SPECIFICATION ETSI ETSI TS 127 007 V14.3.0 (2017-04)13GP

2、P TS 27.007 version 14.3.0 Release 14Reference RTS/TSGC-0127007ve30 Keywords GSM,LTE,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture

3、 de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modi

4、fied without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. U

5、sers of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please se

6、nd your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permissio

7、n of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ET

8、SI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 127 007

9、V14.3.0 (2017-04)23GPP TS 27.007 version 14.3.0 Release 14Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, a

10、nd can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to th

11、e ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. For

12、eword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the co

13、rresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “c

14、annot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 127 007 V14.3.0 (2017-04)33GPP TS 27.007 version 14.3.0 Rel

15、ease 14Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 9g31 Scope 10g32 References 10g33 Definitions and abbreviations . 17g33.1 Definitions 17g33.2 Abbreviations . 17g34 AT command syntax 18g34.0 General . 18g34.1 Command line 18g34.2 Information respons

16、es and result codes 19g34.3 ITU-T Recommendation V.250 14 TE-TA interface commands 19g35 General commands . 20g35.0 General . 20g35.1 Request manufacturer identification +CGMI . 20g35.2 Request model identification +CGMM 21g35.3 Request revision identification +CGMR 21g35.4 Request product serial nu

17、mber identification +CGSN . 22g35.5 Select TE character set +CSCS 23g35.6 Request international mobile subscriber identity +CIMI . 24g35.7 Multiplexing mode +CMUX 25g35.8 ITU-T Recommendaton V.250 14 generic TA control commands 27g35.9 PCCA STD-101 17 select wireless network +WS46 . 27g35.10 Informa

18、tive examples . 28g36 Call control commands and methods . 29g36.0 General . 29g36.1 Select type of address +CSTA 29g36.2 ITU-T Recommendation V.250 14 dial command D. 30g36.3 Direct dialling from phonebooks 30g36.4 Call mode +CMOD 32g36.4A Voice call mode +CVMOD 32g36.5 Hangup call +CHUP . 33g36.6 A

19、lternating mode call control method 33g36.7 Select bearer service type +CBST 35g36.8 Radio link protocol +CRLP 37g36.9 Service reporting control +CR 38g36.10 Extended error report +CEER 39g36.11 Cellular result codes +CRC 40g36.12 HSCSD device parameters +CHSD . 41g36.13 HSCSD transparent call confi

20、guration +CHST 42g36.14 HSCSD non-transparent call configuration +CHSN 43g36.15 HSCSD current call parameters +CHSC 44g36.16 HSCSD parameters report +CHSR 44g36.17 HSCSD automatic user initiated upgrading +CHSU 45g36.18 HSCSD non-transparent asymmetry configuration +CHSA 46g36.19 Single numbering sc

21、heme +CSNS . 46g36.20 Voice hangup control +CVHU . 47g36.21 CCITT V.120 36 rate adaption protocol +CV120 . 48g36.22 Settings date format +CSDF . 49g36.23 Silence command +CSIL 50g3ETSI ETSI TS 127 007 V14.3.0 (2017-04)43GPP TS 27.007 version 14.3.0 Release 146.24 Settings time format +CSTF . 50g36.2

22、5 ITU-T Recommendation V.250 14 call control commands . 52g36.26 ITU-T Recommendation V.250 14 data compression commands . 52g36.27 Initiate eCall +CECALL 52g36.28 eCall Notification +CECN . 53g36.29 Informative examples . 54g37 Network service related commands . 55g37.0 General . 55g37.1 Subscriber

23、 number +CNUM 55g37.2 Network registration +CREG . 56g37.3 PLMN selection +COPS 58g37.4 Facility lock +CLCK 60g37.5 Change password +CPWD . 62g37.6 Calling line identification presentation +CLIP . 62g37.7 Calling line identification restriction +CLIR 64g37.8 Connected line identification presentatio

24、n +COLP 65g37.9 Called line identification presentation +CDIP 66g37.10 Closed user group +CCUG . 67g37.11 Call forwarding number and conditions +CCFC 68g37.12 Call waiting +CCWA . 69g37.13 Call related supplementary services +CHLD . 71g37.14 Call deflection +CTFR . 72g37.15 Unstructured supplementar

25、y service data +CUSD . 73g37.16 Advice of charge +CAOC 74g37.17 Supplementary service notifications +CSSN . 75g37.18 List current calls +CLCC . 77g37.19 Preferred PLMN list +CPOL 78g37.20 Selection of preferred PLMN list +CPLS. 80g37.21 Read operator names +COPN 81g37.22 eMLPP priority registration

26、and interrogation +CAEMLPP 81g37.23 eMLPP subscriptions +CPPS . 82g37.24 Fast call setup conditions +CFCS. 82g37.25 Automatic answer for eMLPP service +CAAP 83g37.26 User to user signalling service 1 +CUUS1 . 83g37.27 Preferred network indication +CPNET 85g37.28 Preferred network status +CPNSTAT 86g

27、37.29 Current packet switched bearer +CPSB . 86g37.30 Calling name identification presentation +CNAP 88g37.31 Connected line identification restriction status +COLR . 89g37.32 Service specific access control restriction status +CSSAC 89g37.33 Network emergency bearer services support +CNEM . 91g37.3

28、4 Enhanced closed user group +CECUG 92g37.35 Communication forwarding number and conditions with URI support +CCFCU . 94g37.36 Message waiting indication control +CMWI . 95g37.37 Session start and stop for MMTEL and SMSoverIP applications +CSCM . 96g37.38 Power saving mode setting +CPSMS . 98g37.39

29、Application Start and Stop indication for applications other than MMTEL and SMSoverIP +CACDC . 99g37.40 eDRX setting +CEDRXS . 100g37.41 eDRX read dynamic parameters +CEDRXRDP 101g37.42 CIoT optimization configuration +CCIOTOPT . 102g37.43 Informative examples . 103g38 Mobile termination control and

30、 status commands 105g38.0 General . 105g38.1 Phone activity status +CPAS 106g38.2 Set phone functionality +CFUN . 107g38.3 Enter PIN +CPIN . 108g38.4 Battery charge +CBC . 110g38.5 Signal quality +CSQ . 110g38.6 Mobile termination control mode +CMEC 111g38.7 Keypad control +CKPD . 112g3ETSI ETSI TS

31、127 007 V14.3.0 (2017-04)53GPP TS 27.007 version 14.3.0 Release 148.8 Display control +CDIS . 113g38.9 Indicator control +CIND 114g38.10 Mobile termination event reporting +CMER . 115g38.11 Select phonebook memory storage +CPBS 118g38.12 Read phonebook entries +CPBR 119g38.13 Find phonebook entries

32、+CPBF . 120g38.14 Write phonebook entry +CPBW 123g38.15 Clock +CCLK 124g38.16 Alarm +CALA 125g38.17 Generic SIM access +CSIM . 126g38.18 Restricted SIM access +CRSM 127g38.19 Secure control command +CSCC . 128g38.20 Alert sound mode +CALM . 129g38.21 Ringer sound level +CRSL . 129g38.22 Vibrator mod

33、e +CVIB 130g38.23 Loudspeaker volume level +CLVL 131g38.24 Mute control +CMUT 131g38.25 Accumulated call meter +CACM . 132g38.26 Accumulated call meter maximum +CAMM . 132g38.27 Price per unit and currency table +CPUC 133g38.28 Call meter maximum event +CCWE 133g38.29 Power class +CPWC 134g38.30 Set

34、 language +CLAN . 135g38.31 Language event +CLAE . 136g38.32 Set greeting text +CSGT 136g38.33 Set voice mail number +CSVM . 137g38.34 Ring melody control +CRMC 138g38.35 Ring melody playback +CRMP 139g38.36 Master reset +CMAR . 139g38.37 List all available AT commands +CLAC . 140g38.38 Delete alarm

35、 +CALD . 140g38.39 Postpone or dismiss an alarm +CAPD . 141g38.40 Automatic time zone update +CTZU . 141g38.41 Time zone reporting +CTZR 142g38.42 Enter protocol mode+CPROT 143g38.43 Generic UICC logical channel access +CGLA 144g38.44 Restricted UICC logical channel access +CRLA . 145g38.45 Open log

36、ical channel +CCHO 147g38.46 Close logical channel +CCHC 147g38.47 EAP authentication +CEAP . 148g38.48 EAP retrieve parameters +CERP 150g38.49 UICC application discovery +CUAD . 150g38.50 Mobile originated location request +CMOLR 151g38.51 Backlight +CBKLT 155g38.52 Command touch screen action +CTS

37、A 156g38.53 Command screen orientation +CSO . 158g38.54 Command screen size +CSS . 160g38.54A Command display screen boundary +CDSB 161g38.55 Positioning control +CPOS 161g38.56 Positioning reporting +CPOSR 179g38.57 Mobile terminated location request notification +CMTLR 181g38.58 Mobile terminated

38、location request disclosure allowance +CMTLRA 182g38.59 Battery capacity +CBCAP 182g38.60 Battery connection status +CBCON . 183g38.61 Battery charger status +CBCHG 184g38.62 Printing IP address format +CGPIAF . 184g38.63 IMS single radio voice call continuity +CISRVCC . 186g38.64 IMS network report

39、ing +CIREP . 186g38.65 Remaining PIN retries +CPINR . 188g38.66 Set card slot +CSUS . 189g38.67 Emergency numbers +CEN 189g38.68 Availability for voice calls with IMS +CAVIMS. 190g3ETSI ETSI TS 127 007 V14.3.0 (2017-04)63GPP TS 27.007 version 14.3.0 Release 148.69 Extended signal quality +CESQ . 191

40、g38.70 Primary notification event reporting +CPNER 193g38.71 IMS registration information +CIREG . 194g38.72 Availability for SMS using IMS +CASIMS. 195g38.73 Monitor of current calls +CMCCS . 195g38.74 List of current calls +CLCCS . 201g38.75 Supported radio accesses +CSRA 204g38.76 Circuit switche

41、d fallback +CCSFB 206g38.77 Reading Coverage Enhancement Status +CRCES . 207g38.78 Informative examples . 209g39 Mobile termination errors . 213g39.1 Report mobile termination error +CMEE . 213g39.1A Report mobile originated location request error +CMOLRE . 213g39.1B Report network error codes +CNEC

42、 214g39.2 Mobile termination error result code +CME ERROR 215g39.2.0 General 215g39.2.1 General errors . 216g39.2.2 GPRS and EPS-related errors . 217g39.2.2.1 Errors related to a failure to perform an attach 217g39.2.2.2 Errors related to a failure to activate a context 217g39.2.2.3 Errors related t

43、o a failure to disconnect a PDN . 218g39.2.2.4 Other GPRS errors 218g39.2.3 VBS, VGCS and eMLPP-related errors 218g39.3 Mobile termination error result code +CMOLRE 218g39.3.1 General 218g39.3.2 Errors 219g39.4 Informative examples . 219g310 Commands for packet domain 219g310.0 General . 219g310.1 C

44、ommands specific to MTs supporting the packet domain 220g310.1.0 General remark about EPS bearer contexts and PDP contexts . 220g310.1.1 Define PDP context +CGDCONT 221g310.1.2 Define secondary PDP context +CGDSCONT . 225g310.1.3 Traffic flow template +CGTFT 227g310.1.4 Quality of service profile (r

45、equested) +CGQREQ 230g310.1.5 Quality of service profile (minimum acceptable) +CGQMIN 232g310.1.6 3G quality of service profile (requested) +CGEQREQ 233g310.1.7 3G quality of service profile (minimum acceptable) +CGEQMIN . 236g310.1.8 3G quality of service profile (negotiated) +CGEQNEG . 240g310.1.9

46、 PS attach or detach +CGATT . 242g310.1.10 PDP context activate or deactivate +CGACT . 242g310.1.11 PDP context modify +CGCMOD . 243g310.1.12 Enter data state +CGDATA 244g310.1.13 Configure local octet stream PAD parameters +CGCLOSP (Obsolete) . 246g310.1.14 Show PDP address(es) +CGPADDR 246g310.1.1

47、5 Automatic response to a network request for PDP context activation +CGAUTO 247g310.1.16 Manual response to a network request for PDP context activation +CGANS 248g310.1.17 GPRS mobile station class +CGCLASS . 249g310.1.18 Configure local triple-X PAD parameters +CGCLPAD (GPRS only) (Obsolete) . 25

48、0g310.1.19 Packet domain event reporting +CGEREP . 250g310.1.20 GPRS network registration status +CGREG 254g310.1.21 Select service for MO SMS messages +CGSMS 257g310.1.22 EPS network registration status +CEREG 257g310.1.23 PDP context read dynamic parameters +CGCONTRDP 260g310.1.24 Secondary PDP co

49、ntext read dynamic parameters +CGSCONTRDP 262g310.1.25 Traffic flow template read dynamic parameters +CGTFTRDP 264g310.1.26 Define EPS quality of service +CGEQOS 265g310.1.27 EPS quality of service read dynamic parameters +CGEQOSRDP . 267g310.1.28 UE modes of operation for EPS +CEMODE 268g310.1.29 Delete non-active PDP contexts +CGDEL . 268g3ETSI ETSI TS 127 007 V14.3.0 (2017-04)73GPP TS 27.007 version 14.3.0 Release 1410.1.30 Signalling connection status +CSCON . 269g310.1.31 Define PDP context authentication parameters +CGAUTH . 271g310.1.32 Initial PDP contex