ETSI TS 125 484-2018 Universal Mobile Telecommunications System (UMTS) Automatic Neighbour Relation (ANR) for UTRAN Stage 2 (V15 0 0 3GPP TS 25 484 version 15 0 0 Release 15).pdf

《ETSI TS 125 484-2018 Universal Mobile Telecommunications System (UMTS) Automatic Neighbour Relation (ANR) for UTRAN Stage 2 (V15 0 0 3GPP TS 25 484 version 15 0 0 Release 15).pdf》由会员分享，可在线阅读，更多相关《ETSI TS 125 484-2018 Universal Mobile Telecommunications System (UMTS) Automatic Neighbour Relation (ANR) for UTRAN Stage 2 (V15 0 0 3GPP TS 25 484 version 15 0 0 Release 15).pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 125 484 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); Automatic Neighbour Relation (ANR) for UTRAN; Stage 2 (3GPP TS 25.484 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 484 V15.0.0 (2018-07)13GPP TS 25.484 version 15.0.0 Release 15Reference RTS/

2、TSGR-0325484vf00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present docu

3、ment can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In ca

4、se of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the docum

5、ent may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/po

6、rtal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modi

7、fied without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademar

8、ks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 484 V15.0.0 (2018-07)23GPP TS 25.484 version 15.0.0

9、Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 0

10、00 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no invest

11、igation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document

12、 may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in

13、the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifi

14、cations or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal

15、 verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NO

16、T allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 484 V15.0.0 (2018-07)33GPP TS 25.484 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 4g31 Scope 5g32 References 5g33 Definitions, symbols and abb

17、reviations . 5g33.1 Definitions 5g33.2 Symbols 5g33.3 Abbreviations . 6g34 Automatic Neighbour Relation Function, Main Concepts . 6g34.1 General . 6g34.2 ANR Handling in the UTRAN Infrastructure - Overall Description 7g34.2.1 Iur Connectivity exists between the involved RNCs 7g34.2.1.1 ANR Report ov

18、er Uu for UTRAN cells 7g34.2.1.2 ANR Report over Iur for UTRAN cells 8g34.2.1.3 ANR Report over Iur for IRAT cells. 10g34.2.2 Iur Connectivity does not exist between some RNCs involved in ANR . 11g34.2.2.1 ANR report over Uu for UTRAN cells . 11g34.2.3 ANR Report over Uu for IRAT cells - with and wi

19、thout Iur 12g35 Functions and Procedures . 13g35.1 ANR Management 14g35.1.1 ANR Report Forwarding 14g35.1.2 ANR Report Distribution Controlling. 14g35.2 Neighbour Cell Configuration 14g35.2.1 Neighbour Cell Configuration for Intra-RNS cells . 15g35.2.2 Neighbour Cell Configuration for Inter-RNS cell

20、s (with Iur) . 15g35.2.3 Neighbour Cell Configuration (without Iur) . 15g35.3 ANR Logging configuration. 15g35.3.1 Configuration parameters . 16g35.3.2 Configuration validity . 16g35.4 Measurement Collection . 17g35.5 Measurement Reporting . 17g35.6 UE Capabilities 18g3Annex A (informative): Change

21、history . 19g3History 20g3ETSI ETSI TS 125 484 V15.0.0 (2018-07)43GPP TS 25.484 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may

22、 change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2

23、presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporate

24、d in the document. ETSI ETSI TS 125 484 V15.0.0 (2018-07)53GPP TS 25.484 version 15.0.0 Release 151 Scope The present document is a technical specification of the overall support of Automatic Neighbour Relation (ANR) Function in UTRA. 2 References The following documents contain provisions which, th

25、rough reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the

26、latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 3 Definitions, symb

27、ols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Base UTRAN Cell: A cell in UTR

28、AN for which a missing neighbour cell is detected. Neighbour Cell: A cell in UTRAN, LTE or GSM/GERAN that is a neighbour cell to a Base UTRAN Cell. Neighbour Cell Identifier (NCI): The identifier of a Neighbour Cell Neighbour cell Relation (NR): Information that a Neighbour Cell, identified with NCI

29、, is a neighbour to a Base UTRAN Cell. NR is stored in the RNC controlling the Base UTRAN Cell. Conceptual Neighbour Relation Functions: The ANR is described using a number of conceptual entities and functions in the RNC: Neighbour Relation Table, Neighbour Relation Table Management Function, Neighb

30、our Removal Function and Neighbour Detection Function. These entities and functions are used for descriptive purpose only and shall not be regarded as requirements on the implementation in RNC. Receiving RNC: the RNC receiving the ANR report over Uu Base RNC: the CRNC of the Base UTRAN Cell Neighbou

31、r RNC: the CRNC of the Neighbour Cell in UTRAN ANR-PLMN List: A list of PLMNs that is the RPLMN and the list of equivalent PLMNs for the UE at the point of receiving ANR logging configuration. ANR measurement: Physical measurements and reading of System Information towards detected cells outside NCL

32、. ANR logging: Storing of essential information of detected cell into UE internal ANR log, when one or more detected cell satisfies ANR logging criteria. 3.2 Symbols Void ETSI ETSI TS 125 484 V15.0.0 (2018-07)63GPP TS 25.484 version 15.0.0 Release 153.3 Abbreviations For the purposes of the present

33、document, the abbreviations given in TR 21.905 1 apply. 4 Automatic Neighbour Relation Function, Main Concepts 4.1 General uni004Euni0065uni0069uni0067uni0068uni0062uni006Funi0075uni0072uni0020uni0044uni0065uni0074uni0065uni0063uni0074uni0069uni006Funi006Euni0020uni0046uni0075uni006Euni0063uni0074un

34、i0069uni006Funi006Euni0049uni006Euni0074uni0065uni0072uni006Euni0061uni006Cuni0020uni0049uni0069uni006Euni0066uni006Funi0072uni006Duni0061uni0074uni0069uni006Funi006Euni0052uni0052uni0043uni0043uni0065uni006Cuni006Cuni0020uni0020uni0049uni006Euni0066uni006Funi0072uni006Duni0061uni0074uni0069uni006Fu

35、ni006Euni0041uni0064uni0064uni002Funi0055uni0070uni0064uni0061uni0074uni0065uni0020uni004Euni0065uni0069uni0067uni0068uni0062uni006Funi0072uni0020uni0052uni0065uni006Cuni0061uni0074uni0069uni006Funi006Euni0073uni004Euni0052uni0020uni0072uni0065uni0070uni006Funi0072uni0074uni004Euni0052uni0054uni004D

36、uni0061uni006Euni0061uni0067uni0065uni006Duni006Euni0074uni0020uni0046uni0075uni006Euni0063uni0074uni0069uni006Funi006Euni004Euni0065uni0069uni0067uni0068uni0062uni006Funi0075uni0072uni0052uni0065uni006Duni006Funi0076uni0061uni006Cuni0046uni0075uni006Euni0063uni0074uni0069uni006Funi006Euni004Euni006

37、5uni0069uni0067uni0068uni0062uni006Funi0072uni0020uni0052uni0065uni006Cuni0061uni0074uni0069uni006Funi006Euni0020uni0054uni0061uni0062uni006Cuni0065uni0031uni0032uni004Euni0043uni0049uni0033uni004Euni006Funi0020uni0052uni0065uni006Duni006Funi0076uni0065uni004Euni0043uni0049uni0023uni0031uni004Euni00

38、43uni0049uni0023uni0031uni004Euni006Funi0020uni0048uni004Funi004Euni0052uni004Euni0043uni006Cuni0023uni0031uni004Euni0065uni0069uni0067uni0068uni0062uni006Funi0075uni0072uni0020uni0043uni0065uni006Cuni006Cuni0020uni0049uni0069uni006Euni0066uni006Funi0072uni006Duni0061uni0074uni0069uni006Funi006EFigu

39、re 4.1-1: Interaction between RNC and O&M due to ANR The ANR function resides in the RNC and is composed of the Neighbour Relation Table (NRT) Management Function, Neighbour Detection Function and Neighbour Removal Function. The Neighbour Detection Function detects new neighbours and adds them to th

40、e NRT. The Neighbour Removal Function removes outdated NRs. ETSI ETSI TS 125 484 V15.0.0 (2018-07)73GPP TS 25.484 version 15.0.0 Release 15A Neighbour cell Relation (NR) between a Base UTRAN Cell and a Neighbour Cell exists if the RNC controlling the Base UTRAN Cell: a) Knows the following Neighbour

41、 Cell information: - Neighbour cell is in UTRAN: PLMN-Id, Cell Identifier(C-ID), RNC-ID/Extended RNC-ID, - Neighbour cell is in LTE: ECGI (PLMN Id + Cell Identity) - Neighbour cell is in GSM/GERAN: PLMN Id, LAC, CI, BSIC b) Has an entry in the Neighbour Relation Table for the Base UTRAN Cell identif

42、ying the neighbour cell. c) Has all required attributes defined in the Neighbour Relation Table entry or set to default values. Among these attributes are the frequency information (UARFCN, BCCH ARFCN, EARFCN) and handover routing parameters not already considered in (a): - Neighbour cell is in UTRA

43、N: LAC and RAC - Neighbour cell is in LTE: TAI For each NR, the NRT contains the Neighbour Cell Identifier (NCI), which identifies the neighbour cells. A neighbour cell may be a UTRAN, LTE or GSM cell. Furthermore, each NR has two attributes, the No Remove and the No HO attributes. These attributes

44、have the following definitions: - No Remove: If checked, the RNC shall not remove the Neighbour cell Relation from the NRT. - No HO: If checked, the Neighbour cell Relation shall not be used as a neighbour cell by Intra RNS, Inter RNS or Inter RAT mobility functions in UTRAN. The ANR function also a

45、llows O&M to manage the NRT. O&M can add and delete NRs. It can also change the attributes of the NR. The O&M system is informed about changes in the NRT. 4.2 ANR Handling in the UTRAN Infrastructure - Overall Description If UTRAN ANR functionality is supported in UTRAN, RNC shall be able to configu

46、re the UE to perform the ANR measurement. ANR capable UE performs the ANR measurement and records in its logbook newly detected cells which meet the criteria given in the configuration. The Receiving RNC uses RRC signalling to retrieve the ANR report over the Uu interface after the UE has indicated

47、that it has a logged ANR report. The Receiving RNC handles the ANR report and may forward the ANR report to different RNCs. This chapter illustrates the handling and message sequences to be used to configure a new neighbour relation for a UTRAN cell. 4.2.1 Iur Connectivity exists between the involve

48、d RNCs The ANR function supports forwarding of ANR reports from the Receiving RNC to RNCs indicated as Base RNCs in the ANR report. Furthermore the ANR function supports suspension (and resuming) ANR logs reporting over Iur from other RNCs as described in 5.1.2. This chapter describes the handling i

49、n the Receiving, Base and Neighbour RNCs when Iur connectivity exists between the involved RNCs. 4.2.1.1 ANR Report over Uu for UTRAN cells When receiving an ANR report over Uu, the Receiving RNC uses the globally unique cell identities in the report to determine the network addresses of the RNCs that are controlling the Base UTRAN cells. The network address of this Base RNC is retrieved using configuration in the Receiving RNC and/or O&M. The Receiving RNC decides the necessity to forward the ANR report. If the Base UTRAN Cell is under control of the Receiving RNC, t