ETSI TS 125 225-2018 Universal Mobile Telecommunications System (UMTS) Physical layer Measurements (TDD) (V15 0 0 3GPP TS 25 225 version 15 0 0 Release 15).pdf

《ETSI TS 125 225-2018 Universal Mobile Telecommunications System (UMTS) Physical layer Measurements (TDD) (V15 0 0 3GPP TS 25 225 version 15 0 0 Release 15).pdf》由会员分享，可在线阅读，更多相关《ETSI TS 125 225-2018 Universal Mobile Telecommunications System (UMTS) Physical layer Measurements (TDD) (V15 0 0 3GPP TS 25 225 version 15 0 0 Release 15).pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 125 225 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); Physical layer; Measurements (TDD) (3GPP TS 25.225 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 225 V15.0.0 (2018-07)13GPP TS 25.225 version 15.0.0 Release 15Reference RTS/TSGR-0625225vf00 Ke

2、ywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloa

3、ded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing

4、or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject

5、to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/Peopl

6、e/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the wr

7、itten authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI register

8、ed for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 225 V15.0.0 (2018-07)23GPP TS 25.225 version 15.0.0 Release 15Intellect

9、ual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectu

10、al Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including

11、IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include tradem

12、arks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present documen

13、t does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports

14、using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology

15、In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI d

16、eliverables except when used in direct citation. ETSI ETSI TS 125 225 V15.0.0 (2018-07)33GPP TS 25.225 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Abbreviations . 7g34 Control of UE/UTRAN measur

17、ements 7g34.1 General measurement concept 8g34.2 Measurements for cell selection/reselection . 8g34.3 Measurements for Handover 8g34.4 Measurements for DCA 8g34.5 Measurements for timing advance 8g35 Measurement abilities for UTRA TDD 9g35.1 UE measurement abilities . 9g35.1.1 P-CCPCH RSCP . 10g35.1

18、.2 CPICH RSCP 10g35.1.3 Timeslot ISCP. 10g35.1.4 UTRA carrier RSSI . 10g35.1.5 GSM carrier RSSI . 11g35.1.6 SIR 11g35.1.7 CPICH Ec/No . 11g35.1.8 Transport channel BLER 11g35.1.9 UE transmitted power . 12g35.1.10 SFN-SFN observed time difference 13g35.1.11 SFN-CFN observed time difference . 14g35.1.

19、12 Observed time difference to GSM cell . 14g35.1.13 UE GPS Timing of Cell Frames for UE positioning . 15g35.1.14 Timing Advance (TADV) for 1.28Mcps TDD . 15g35.1.15 UE GPS code phase 15g35.1.16 UE transmission power headroom (1.28Mcps option only) . 15g35.1.17 UE transmission power headroom (3.84Mc

20、ps and 7.68Mcps options) 16g35.1.18 E-UTRA RSRP . 16g35.1.19 E-UTRA RSRQ 17g35.1.20 IEEE 802.11 Beacon RSSI . 17g35.2 UTRAN measurement abilities 17g35.2.1 RSCP 17g35.2.2 Timeslot ISCP . 18g35.2.3 Received total wide band power . 18g35.2.4 SIR 18g35.2.5 Transport channel BER . 18g35.2.6 Transmitted

21、carrier power . 19g35.2.7 Transmitted code power 19g35.2.8 RX Timing Deviation . 19g35.2.9 UTRAN GPS Timing of Cell Frames for UE positioning 19g35.2.10 SFN-SFN observed time difference 19g35.2.11 Cell Sync Burst Timing 20g35.2.12 Cell Sync Burst SIR 20g35.2.13 Received SYNC-UL Timing Deviation for

22、1.28Mcps TDD 21g35.2.14 Angle of Arrival (AOA) for 1.28Mcps TDD 21g35.2.15 HS-SICH reception quality . 21g35.2.16 Transmitted carrier power of all codes not used for HS-PDSCH, HS-SCCH, E-AGCH, or E-HICH transmission 22g35.2.17 UpPTS interference (1.28Mcps TDD) 22g3ETSI ETSI TS 125 225 V15.0.0 (2018-

23、07)43GPP TS 25.225 version 15.0.0 Release 15Annex A (informative): Monitoring GSM from TDD: Calculation Results 23g3A.1 Low data rate traffic using 1 uplink and 1 downlink slot (for the 3.84 Mcps option) 23g3A.1.1 Higher data rate traffic using more than 1 uplink and/or 1 downlink TDD timeslot 24g3A

24、.2 Low data rate traffic using 1 uplink and 1 downlink slot (for the 1.28 Mcps option) 25g3A.2.1 Higher data rate traffic using more than 1 uplink and/or 1 downlink TDD timeslot (for 1.28Mcps TDD) . 26g3Annex B (informative): Change history . 28g3History 31g3ETSI ETSI TS 125 225 V15.0.0 (2018-07)53G

25、PP TS 25.225 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify t

26、he contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG appr

27、oved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 125 225 V15.0.0 (2018-07)63GPP

28、 TS 25.225 version 15.0.0 Release 151 Scope The present document contains the description and definition of the measurements done at the UE and network in TDD mode in order to support operation in idle mode and connected mode. 2 References The following documents contain provisions which, through re

29、ference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest v

30、ersion applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TS 25.211: “Physical channels and mapping of transport channels onto physica

31、l channels (FDD)“. 2 3GPP TS 25.212: “Multiplexing and channel coding (FDD)“. 3 3GPP TS 25.213: “Spreading and modulation (FDD)“. 4 3GPP TS 25.214: “Physical layer procedures (FDD)“. 5 3GPP TS 25.215: “Physical layer measurements (FDD)“. 6 3GPP TS 25.221: “Physical channels and mapping of transport

32、channels onto physical channels (TDD)“. 7 3GPP TS 25.222: “Multiplexing and channel coding (TDD)“. 8 3GPP TS 25.223: “Spreading and modulation (TDD)“. 9 3GPP TS 25.224: “Physical layer procedures (TDD)“. 10 3GPP TS 25.301: “Radio Interface Protocol Architecture“. 11 3GPP TS 25.302: “Services provide

33、d by the Physical layer“. 12 3GPP TS 25.303: “UE functions and interlayer procedures in connected mode“. 13 3GPP TS 25.304: “UE procedures in idle mode“. 14 3GPP TS 25.331: “RRC Protocol Specification“. 15 3GPP TR 25.922: “Radio Resource Management Strategies“. 16 3GPP TR 25.923: “Report on Location

34、 Services (LCS)“. 17 3GPP TS 25.102: “UTRA (UE) TDD; Radio transmission and Reception“ 18 3GPP TS 25.105: “UTRA (BS) TDD; Radio transmission and Reception“ 19 3GPP TS 25.123: “Requirements for Support of Radio Resources Management (TDD)“ 20 3GPP TS 36.211: “E-UTRA; Physical Channels and Modulation“

35、21 3GPP TS 36.214: “E-UTRA; Physical layer Measurements“ 22 IEEE 802.11, Part 11: “Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications, IEEE Std.“. ETSI ETSI TS 125 225 V15.0.0 (2018-07)73GPP TS 25.225 version 15.0.0 Release 153 Abbreviations For the purposes of the pres

36、ent document, the following abbreviations apply: BCH Broadcast Channel BCCH Broadcast Control Channel (GSM) BER Bit Error Rate BLER Block Error Rate CFN Connection Frame Number CPICH Common Pilot Channel (FDD) CRC Cyclic Redundancy Check DCA Dynamic Channel Allocation DCH Dedicated Channel DPCH Dedi

37、cated Physical Channel Ec/No Received energy per chip divided by the power density in the band E-AGCH E-DCH Absolute Grant Channel E-HICH E-DCH Hybrid ARQ Indicator Channel E-UTRA Evolved Universal Terrestrial Radio Access FACH Forward Access Channel FCCH Frequency Correction Channel (GSM) FDD Frequ

38、ency Division Duplex GSM Global System for Mobile Communication GPS Global Positioning System ISCP Interference Signal Code Power P-CCPCH Primary Common Control Physical Channel PCH Paging Channel PLMN Public Land Mobile Network PRACH Physical Random Access Channel PDSCH Physical Downlink Shared Cha

39、nnel PUSCH Physical Uplink Shared Channel RACH Random Access Channel RSCP Received Signal Code Power RSRP Reference Signal Received Power RSRQ Reference Signal Received Quality RSSI Received Signal Strength Indicator S-CCPCH Secondary Common Control Physical Channel SCH Synchronisation Channel SCTD

40、Space Code Transmit Diversity SF Spreading Factor SFN System Frame Number SIR Signal-to-Interference Ratio TDD Time Division Duplex TDMA Time Division Multiple Access TrCH Transport Channel TTI Transmission Time Interval UE User Equipment UMTS Universal Mobile Telecommunications System USCH Uplink S

41、hared Channel UTRA UMTS Terrestrial Radio Access UTRAN UMTS Terrestrial Radio Access Network 4 Control of UE/UTRAN measurements In this clause the general measurement control concept of the higher layers is briefly described to provide an understanding on how L1 measurements are initiated and contro

42、lled by higher layers. ETSI ETSI TS 125 225 V15.0.0 (2018-07)83GPP TS 25.225 version 15.0.0 Release 154.1 General measurement concept L1 provides with the measurement specifications a toolbox of measurement abilities for the UE and the UTRAN. These measurements can be differentiated in different mea

43、surement types: intra-frequency, inter-frequency, inter-system, traffic volume, quality and internal measurements (see 14). In the L1 measurement specifications the measurements are distinguished between measurements in the UE (the messages will be described in the RRC Protocol) and measurements in

44、the UTRAN (the messages will be described in the NBAP and the Frame Protocol). To initiate a specific measurement the UTRAN transmits a measurement control message to the UE including a measurement ID and type, a command (setup, modify, release), the measurement objects and quantity, the reporting q

45、uantities, criteria (periodical/event-triggered) and mode (acknowledged/unacknowledged), see 14. When the reporting criteria is fulfilled the UE shall answer with a measurement report message to the UTRAN including the measurement ID and the results. In idle mode the measurement control message is b

46、roadcast in a System Information. Intra-frequency reporting events, traffic volume reporting events and UE internal measurement reporting events described in 14 define events which trigger the UE to send a report to the UTRAN. This defines a toolbox from which the UTRAN can choose the needed reporti

47、ng events. 4.2 Measurements for cell selection/reselection Whenever a PLMN has been selected the UE shall start to find a suitable cell to camp on, this is cell selection. When camped on cell the UE regularly searches for a better cell depending on the cell reselection criteria, this is called cell

48、reselection. The procedures for cell selection and reselection are described in 13 and the measurements carried out by the UE are explained in this specification. 4.3 Measurements for Handover For the handover preparation the UE receives from the UTRAN a list of cells (e.g. TDD, FDD or GSM).which th

49、e UE shall monitor (see monitored set in 14) in its idle timeslots. At the beginning of the measurement process the UE shall find synchronization to the cell to measure using the synchronization channel. This is described under cell search in 9 if the monitored cell is a TDD cell and in 4 if it is an FDD cell. For a TDD cell to monitor after this procedure the exact timing of the midamble of the P-CCPCH is known and the measurements can be performed. Depending on the UE implementation and if timing informa