ETSI TS 125 202-2018 Universal Mobile Telecommunications System (UMTS) 7 68 Mcps Time Division Duplex (TDD) option Overall description Stage 2 (V15 0 0 3GPP TS 25 202 version 15 0 .pdf

《ETSI TS 125 202-2018 Universal Mobile Telecommunications System (UMTS) 7 68 Mcps Time Division Duplex (TDD) option Overall description Stage 2 (V15 0 0 3GPP TS 25 202 version 15 0 .pdf》由会员分享，可在线阅读，更多相关《ETSI TS 125 202-2018 Universal Mobile Telecommunications System (UMTS) 7 68 Mcps Time Division Duplex (TDD) option Overall description Stage 2 (V15 0 0 3GPP TS 25 202 version 15 0 .pdf（31页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 125 202 V15.0.0 (2018-07) Universal Mobile Telecommunications System (UMTS); 7.68 Mcps Time Division Duplex (TDD) option; Overall description: Stage 2 (3GPP TS 25.202 version 15.0.0 Release 15) TECHNICAL SPECIFICATION ETSI ETSI TS 125 202 V15.0.0 (2018-07)13GPP TS 25.202 version 15.0.0 Rele

2、ase 15Reference RTS/TSGR-0625202vf00 Keywords UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important not

3、ice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authoriz

4、ation of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be

5、aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following

6、 services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF versi

7、on shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM a

8、nd LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TS 125 202 V15.0.0 (2018-07)23GPP TS 25

9、.202 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can b

10、e found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI I

11、PR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks

12、The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of

13、those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer

14、to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/

15、queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ a

16、nd “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 125 202 V15.0.0 (2018-07)33GPP TS 25.202 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definiti

17、ons, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 7g33.3 Abbreviations . 7g34 Background and introduction . 7g35 Requirements 8g36 Physical layer structure 8g36.0 Services offered to higher layers 8g36.1 Frame structure . 8g36.2 Burst structure 8g36.3 Midambles 9g36.4 Coding and Mod

18、ulation 12g36.5 Scrambling Codes. 12g36.6 Synchronisation Codes . 13g36.7 Transmit diversity. 13g36.9 Indicator Channels 13g36.9.1 Paging Indicator Channel (PICH) . 13g36.9.2 MBMS Indicator Channel (MICH) . 13g36.10 Mapping of transport channels to physical channels 13g37 Physical layer procedures .

19、 14g37.1 Power Control 14g37.2 Timing Advance . 15g37.3 HSDPA procedures 15g37.4 Synchronisation procedures 15g37.5 RACH procedures 15g37.6 Discontinuous transmission (DTX) procedure . 15g37.7 Downlink transmit diversity procedure 15g37.8 DSCH procedure 15g37.9 Macrodiversity procedure . 15g37.10 IP

20、DL procedure 15g37.11 E-DCH procedures . 15g38 UE capabilities . 15g39 Layer 2/3 protocol aspects 16g39.1 Protocol architecture. 16g39.2 Signalling . 16g39.2.1 General 16g39.2.2 L2/MAC differences . 16g39.2.3 L2/RRC differences 16g39.3 HSDPA related issues 17g39.4 Mobility 17g39.5 Idle Mode Procedur

21、es . 17g39.6 E-DCH related issues . 17g310 Iub/Iur aspects 17g310.1 Impacts on Iub/Iur interfaces general aspects 17g3ETSI ETSI TS 125 202 V15.0.0 (2018-07)43GPP TS 25.202 version 15.0.0 Release 1510.1.1 Timing advance and Rx Timing Deviation . 17g310.1.2 Paging . 17g310.1.3 DSCH Power Control from

22、the RNC 18g310.2 Impacts on Iub/Iur control plane protocols . 18g310.3 Impacts on Iub/Iur user plane protocols . 18g311 Radio aspects 18g311.1 UE radio transmission and reception 18g311.1.1 Transmitter characteristics 18g311.1.1.1 Transmit power . 18g311.1.1.2 Output RF spectrum emissions . 18g311.1

23、.1.2.1 Occupied bandwidth 18g311.1.1.2.2 Out of band emission . 18g311.1.1.2.2.1 Spectrum emission mask 18g311.1.1.2.2.2 Adjacent Channel Leakage power Ratio (ACLR) 19g311.1.1.2.2.3 Spurious emissions 19g311.1.2 Receiver characteristics 19g311.1.2.1 Reference sensitivity level 19g311.1.2.1.1 Minimum

24、 Requirement . 20g311.1.2.2 Adjacent Channel Selectivity (ACS) . 20g311.1.2.2.1 Minimum Requirement . 20g311.1.2.3 Blocking characteristics 20g311.1.2.3.1 Minimum Requirement . 20g311.1.2.4 Spurious response . 21g311.1.2.4.1 Minimum Requirement . 21g311.1.2.5 Spurious emissions 22g311.1.2.5.1 Minimu

25、m Requirement . 22g311.2 Base station radio transmission and reception 22g311.2.1 Transmitter characteristics 22g311.2.1.1 Base station output power . 22g311.2.1.2 Output RF spectrum emissions . 22g311.2.1.2.1 Occupied bandwidth 22g311.2.1.2.2 Out of band emission . 22g311.2.1.2.2.1 Spectrum emissio

26、n mask 22g311.2.1.2.2.2 Adjacent Channel Leakage power Ratio (ACLR) 24g311.2.1.2.2.2.1 Minimum requirement 25g311.2.1.2.2.3 Spurious emissions 25g311.2.2 Receiver characteristics 25g311.2.2.1 Reference sensitivity level 25g311.2.2.1.1 Minimum requirement. 25g311.2.2.2 Adjacent Channel Selectivity (A

27、CS) . 25g311.2.2.2.1 Minimum requirement . 26g311.2.2.3 Blocking characteristics 26g311.2.2.3.1 Minimum requirement . 26g311.2.2.3.2 Collocation with GSM900 and/or DCS 1800 27g311.2.2.4 Spurious emissions 27g311.2.2.4.1 Minimum requirement . 28g3Annex A (informative): Change history . 29g3History 30

28、g3ETSI ETSI TS 125 202 V15.0.0 (2018-07)53GPP TS 25.202 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal

29、 TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for app

30、roval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI

31、ETSI TS 125 202 V15.0.0 (2018-07)63GPP TS 25.202 version 15.0.0 Release 151 Scope The present document is the overall technical specification for the support of the 7.68Mcps TDD option in UTRA. 2 References The following documents contain provisions which, through reference in this text, constitute

32、provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a

33、reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 25.895 (V6.0.0): “Analysis of higher chip rates for UTRA TDD evolution“. 2 3GPP TS 25.221: “Physical chann

34、els and mapping of transport channels onto physical channels (TDD)“. 3 3GPP TS 25.222: “Multiplexing and channel coding (TDD)“. 4 3GPP TS 25.223: “Spreading and modulation (TDD)“. 5 3GPP TS 25.224: “Physical layer procedures (TDD)“. 6 3GPP TS 25.225: “Physical layer; Measurements (TDD)“. 7 3GPP TS 2

35、5.301: “Radio Interface Protocol Architecture“. 8 3GPP TS 25.306: “UE Radio Access capabilities“. 9 3GPP TS 25.321: “Medium Access Control (MAC) protocol specification“. 10 3GPP TS 25.102: “User Equipment (UE) radio transmission and reception (TDD)“. 11 3GPP TS 25.105 “UTRAN (BS) TDD; Radio transmis

36、sion and reception“. 12 3GPP TR 21.905: “Vocabulary for 3GPP Specifications“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 12 and the following apply. A term defined in the present document takes prece

37、dence over the definition of the same term, if any, in TR 21.905 12. (void) ETSI ETSI TS 125 202 V15.0.0 (2018-07)73GPP TS 25.202 version 15.0.0 Release 153.2 Symbols For the purposes of the present document, the following symbols apply: (void) 3.3 Abbreviations For the purposes of the present docum

38、ent, the abbreviations given in TR 21.905 12 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 12. BCH Broadcast Channel CCPCH Common Control Physical Channel DCH Dedicated Channel DPCH Dedicat

39、ed Physical Channel DSCH Downlink Shared ChannelE-AGCH E-DCH Absolute Grant Channel E-DCH Enhanced Dedicated Channel E-HICH E-DCH Hybrid ARQ Indicator Channel E-PUCH E-DCH Physical Uplink Channel E-RUCCH E-DCH Random Access Uplink Control Channel FACH Forward Access Channel HS-DSCH High Speed Downli

40、nk Shared Channel HS-PDSCH High Speed Physical Downlink Shared Channel HS-SCCH Shared Control Channel for HS-DSCH HS-SICH Shared Information Channel for HS-DSCH P-CCPCH Primary CCPCH PCH Paging Channel PDSCH Physical Downlink Shared Channel PI Paging Indicator (value calculated by higher layers) PIC

41、H Page Indicator Channel PRACH Physical Random Access Channel PUSCH Physical Uplink Shared Channel RACH Random Access Channel S-CCPCH Secondary CCPCH SCH Synchronisation Channel TrCH Transport Channel USCH Uplink Shared Channel 4 Background and introduction The 7.68Mcps TDD option is an evolution of

42、 the 3.84Mcps TDD option to a higher chip rate. There exists a great degree of commonality between the 3.84Mcps TDD option and the 7.68Mcps TDD option. Nevertheless, there are many aspects of the 7.68Mcps TDD option that require separate specification to the 3.84Mcps TDD option. The following aspect

43、s are specified at a high level in this document: - Physical layer structure; - Physical layer procedures; - UE capabilities; - Layer 2/3 protocol aspects; - Iub / Iur aspects; - Radio aspects; ETSI ETSI TS 125 202 V15.0.0 (2018-07)83GPP TS 25.202 version 15.0.0 Release 155 Requirements - The 7.68Mc

44、ps TDD option shall provide significant enhancements in terms of user experience (throughput and delay) and/or capacity (at least to the extent shown in 1). - Full mobility shall be supported, i.e., mobility should be supported for high-speed UE cases also, but optimisation should be for low-speed t

45、o medium-speed scenarios. - It is highly desirable for the 7.68Mcps TDD option to maintain commonality with the 3.84Mcps TDD option. New features shall therefore provide significant incremental gain for an acceptable complexity. - The UE and network complexity shall be minimised for a given level of

46、 system performance. - The impact on current releases in terms of both protocol and hardware perspectives shall be taken into account. 6 Physical layer structure 6.0 Services offered to higher layers The 7.68Mcps TDD option supports an identical set of transport channels and indicators to the 3.84Mc

47、ps TDD option. 6.1 Frame structure The 7.68Mcps TDD option frame is of length 10ms and consists of 15 timeslots of duration 5120 * Tc, where Tcis the chip duration (Tc= 1 / 7.68 * 106= 130.2ns). Any timeslot in the frame can be either uplink or downlink. At least one timeslot in the frame is assigne

48、d to the uplink and at least one timeslot in the frame is assigned to the downlink. The frame structure is shown in Figure 6.1.1. time frequency 10ms 5120 * Tc7.68Mcps Figure 6.1.1: The 7.68Mcps TDD option frame structure 6.2 Burst structure The 7.68Mcps burst consists of two data field portions, a

49、midamble portion containing a training sequence and a guard period as shown in Figure 6.2.1. Several bursts can be transmitted at the same time where each burst uses a different OVSF channelisation code, but the same scrambling code. Data field Data field Midamble guard period 5120 * TcFigure 6.2.1: 7.68Mcps TDD option burst structure Three burst types are specified: burst types 1, 2 and 3. The maximum number of training sequences supported in burst types 1 and 3 is either 4, 8 or 16 depending on cell configuration and either 4 or 8 for burs