ETSI TS 123 108-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Mobile radio interface layer 3 specification core_1.pdf

《ETSI TS 123 108-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Mobile radio interface layer 3 specification core_1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 123 108-2018 Digital cellular telecommunications system (Phase 2+) (GSM) Universal Mobile Telecommunications System (UMTS) Mobile radio interface layer 3 specification core_1.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 123 108 V15.0.0 (2018-06) Digital cellular telecommunications system (Phase 2+) (GSM); Universal Mobile Telecommunications System (UMTS); Mobile radio interface layer 3 specification, core network protocols; Stage 2 (3GPP TS 23.108 version 15.0.0 Release 15) TECHNICAL SPECIFICATION GLOBAL S

2、YSTEM FOR MOBILE COMMUNICATIONSRETSI ETSI TS 123 108 V15.0.0 (2018-06)13GPP TS 23.108 version 15.0.0 Release 15Reference RTS/TSGC-0123108vf00 Keywords GSM,UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017

3、 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any elec

4、tronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PD

5、F) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDelive

6、rableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, includin

7、g photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PL

8、UGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo

9、are trademarks registered and owned by the GSM Association. ETSI ETSI TS 123 108 V15.0.0 (2018-06)23GPP TS 23.108 version 15.0.0 Release 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information

10、pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Se

11、cretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the update

12、s on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as bei

13、ng the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Specificat

14、ion (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.

15、The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as

16、 described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 123 108 V15.0.0 (2018-06)33GPP TS 23.108 version 15.0.0 Release 15Contents Intellectual Pr

17、operty Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g3Introduction 5g31 Scope 6g31.1 Scope of the Technical Specification . 6g31.2 Application to the interface structures 6g31.3 Structure of layer 3 procedures . 6g31.4 Test procedures 6g31.5 Use of logical channels . 6g31.6 Overvie

18、w of control procedures . 7g31.6.1 List of procedures . 7g31.7 Applicability of implementations . 9g31.7.1 Voice Group Call Service (VGCS) and Voice Broadcast Service (VBS). 9g31.7.2 General Packet Radio Service (GPRS) . 9g32 References 9g32.1 Definitions and abbreviations . 12g32.1.1 Random values

19、12g32.2.2 Vocabulary 12g33 Radio Resource management procedures . 12g34 Elementary procedures for Mobility Management . 13g35 Elementary procedures for circuit-switched Call Control 13g36 Support for packet services 13g37 Examples of structured procedures 13g37.1 General . 13g37.1.1 Paging request .

20、 13g37.1.2 Immediate assignment 14g37.1.3 Service request and contention resolution 14g37.1.4 Authentication . 14g37.1.5 Ciphering mode setting . 15g37.1.6 Transaction phase . 15g37.1.6.1 Channel mode modify . 15g37.1.7 Channel release . 15g37.2 Abnormal cases 16g37.3 Selected examples 16g37.3.1 Loc

21、ation updating . 17g37.3.2 Mobile originating call establishment . 18g37.3.3 Mobile terminating call establishment 21g37.3.4 Call clearing 23g37.3.5 DTMF protocol control . 25g37.3.6 Handover 25g37.3.7 In-call modification. 27g37.3.8 Call re-establishment 27g37.3.9 Network initiated mobile originati

22、ng call $(CCBS)$ . 28g38 Handling of unknown, unforeseen, and erroneous protocol data . 32g39 Message functional definitions and contents 33g310 General message format and information elements coding 33g311 List of system parameters . 33g3ETSI ETSI TS 123 108 V15.0.0 (2018-06)43GPP TS 23.108 version

23、 15.0.0 Release 15Annex A (informative): Change History 34g3History 35g3ETSI ETSI TS 123 108 V15.0.0 (2018-06)53GPP TS 23.108 version 15.0.0 Release 15Foreword This Technical Specification (TS) has been produced by the 3rdGeneration Partnership Project (3GPP). The present document specifies the proc

24、edures used at the radio interface core network protocols within the 3rdgeneration mobile telecommunications system and the digital cellular telecommunications system. The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Sho

25、uld the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greate

26、r indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. Introduction The presen

27、t document includes references to features which are not part of the Phase 2+ Release 96 of the GSM Technical specifications. All subclauses which were changed as a result of these features contain a marker (see table below) relevant to the particular feature. ETSI ETSI TS 123 108 V15.0.0 (2018-06)6

28、3GPP TS 23.108 version 15.0.0 Release 151 Scope The present document specifies the procedures used at the radio interface (Reference Point Um, see 3GPP TS 24.002 15) for Call Control (CC), Mobility Management (MM), and Session Management (SM). When the notations for “further study“ or “FS“ or “FFS“

29、are present in the present document they mean that the indicated text is not a normative portion of this standard. These procedures are defined in terms of messages exchanged over the control channels of the radio interface. The control channels are described in 3GPP TS 44.003 16. The structured fun

30、ctions and procedures of this protocol and the relationship with other layers and entities are described in general terms in 3GPP TS 24.007 20. 1.1 Scope of the Technical Specification The procedures currently described in the present document are for the call control of circuit-switched connections

31、, session management for GPRS services, mobility management and radio resource management for circuit-switched and GPRS services. 3GPP TS 24.010 21 contains functional procedures for support of supplementary services. 3GPP TS 24.011 22 contains functional procedures for support of point-to-point sho

32、rt message services. 3GPP TS 24.012 23 contains functional description of short message - cell broadcast. 3GPP TS 44.060 76 contains procedures for radio link control and medium access control (RLC/MAC) of packet data physical channels. 3GPP TS 44.018 80 contains the procedures for the RR protocol.

33、3GPP TS 24.008 81 contains the procedures for the CN protocols. 3GPP TS 44.071 23a contains functional descriptions and procedures for support of location services. NOTE: “layer 3“ includes the functions and protocols described in this Technical Specification. The terms “data link layer“ and “layer

34、2“ are used interchangeably to refer to the layer immediately below layer 3. 1.2 Application to the interface structures The layer 3 procedures apply to the interface structures defined in 3GPP TS 44.003 16. They use the functions and services provided by layer 2 defined in 3GPP TS 44.005 18 and 3GP

35、P TS 44.006 19. 3GPP TS 24.007 20 gives the general description of layer 3 including procedures, messages format and error handling. 1.3 Structure of layer 3 procedures A building block method is used to describe the layer 3 procedures. The basic building blocks are “elementary procedures“ provided

36、by the protocol control entities of the three sublayers, i.e. radio resource management, mobility management and connection management sublayer. Complete layer 3 transactions consist of specific sequences of elementary procedures. The term “structured procedure“ is used for these sequences. 1.4 Test

37、 procedures Test procedures of the GSM radio interface signalling are described in 3GPP TS 51.010 39 and 3GPP TS 51.02x series. 1.5 Use of logical channels The logical control channels are defined in 3GPP TS 45.002 32. In the following those control channels are considered which carry signalling inf

38、ormation or specific types of user packet information: ETSI ETSI TS 123 108 V15.0.0 (2018-06)73GPP TS 23.108 version 15.0.0 Release 15i) Broadcast Control CHannel (BCCH): downlink only, used to broadcast Cell specific information; ii) Synchronization CHannel (SCH): downlink only, used to broadcast s

39、ynchronization and BSS identification information; iii) Paging CHannel (PCH): downlink only, used to send page requests to Mobile Stations (MSs); iv) Random Access CHannel (RACH): uplink only, used to request a Dedicated Control CHannel; v) Access Grant CHannel (AGCH): downlink only, used to allocat

40、e a Dedicated Control CHannel; vi) Standalone Dedicated Control CHannel (SDCCH): bi-directional; vii) Fast Associated Control CHannel (FACCH): bi-directional, associated with a Traffic CHannel; viii)Slow Associated Control CHannel (SACCH): bi-directional, associated with a SDCCH or a Traffic CHannel

41、; ix) Cell Broadcast CHannel (CBCH): downlink only used for general (not point to point) short message information. x) Notification CHannel (NCH): downlink only, used to notify mobile stations of VBS (Voice Broadcast Service) calls or VGCS (Voice Group Call Service) calls. Two service access points

42、are defined on signalling layer 2 which are discriminated by their Service Access Point Identifiers (SAPI) (see 3GPP TS 44.006 19): i) SAPI 0: supports the transfer of signalling information including user-user information; ii) SAPI 3: supports the transfer of user short messages. Layer 3 selects th

43、e service access point, the logical control channel and the mode of operation of layer 2 (acknowledged, unacknowledged or random access, see 3GPP TS 44.005 18 and 3GPP TS 44.006 19) as required for each individual message. 1.6 Overview of control procedures 1.6.1 List of procedures The following pro

44、cedures are specified in the Technical Specification: a) Clause 4 specifies elementary procedures for Mobility Management: - mobility management common procedures (subclause 4.3); - TMSI reallocation procedure (subclause 4.3.1); - authentication procedure (subclause 4.3.2); - identification procedur

45、e (subclause 4.3.3); - IMSI detach procedure (subclause 4.3.4); - abort procedure (subclause 4.3.5); - MM information procedure (subclause 4.3.6); - mobility management specific procedures (subclause 4.4); - location updating procedure (subclause 4.4.1); - periodic updating (subclause 4.4.2); - IMSI

46、 attach procedure (subclause 4.4.3); - generic location updating procedure (subclause 4.4); - connection management sublayer service provision; ETSI ETSI TS 123 108 V15.0.0 (2018-06)83GPP TS 23.108 version 15.0.0 Release 15- mobility management connection establishment (subclause 4.5.1); - mobility

47、management connection information transfer phase (subclause 4.5.2); - mobility management connection release (subclause 4.5.3); - GPRS specific mobility management procedures (subclause 4.7); - GPRS attach procedure (subclause 4.7.3); - GPRS detach procedure (subclause 4.7.4); - GPRS routing area up

48、dating procedure (subclause 4.7.5); - GPRS common mobility management procedures (subclause 4.7); - GPRS P-TMSI reallocation procedure (subclause 4.7.6); - GPRS authentication and ciphering procedure (subclause 4.7.7); - GPRS identification procedure (subclause 4.7.8); - GPRS information procedure (

49、subclause 4.7.12); b) Clause 5 specifies elementary procedures for circuit switched Call Control comprising the following elementary procedures: - mobile originating call establishment (subclause 5.2.1); - mobile terminating call establishment (subclause 5.2.2); - signalling procedures during the active state (subclause 5.3); - user notification procedure (subclause 5.3.1); - call rearrangements (subclause 5.3.2); - DTMF protocol control procedure (subclause 5.5.7); - in-call modification (subclause 5.3.4); - call clearing initiated by the