ETSI TS 102 257-2003 Private Integrated Services Network (PISN) Inter-exchange Signalling Protocol Make Call Request supplementary service《专用综合业务网(PISN) 内部交换信令协议 产生呼叫请求补充业务(版本1 1 1.pdf

《ETSI TS 102 257-2003 Private Integrated Services Network (PISN) Inter-exchange Signalling Protocol Make Call Request supplementary service《专用综合业务网(PISN) 内部交换信令协议 产生呼叫请求补充业务(版本1 1 1.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 257-2003 Private Integrated Services Network (PISN) Inter-exchange Signalling Protocol Make Call Request supplementary service《专用综合业务网(PISN) 内部交换信令协议 产生呼叫请求补充业务(版本1 1 1.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 257 V1.1.1 (2003-08)Technical Specification Private Integrated Services Network (PISN);Inter-exchange Signalling Protocol;Make Call Request supplementary serviceETSI ETSI TS 102 257 V1.1.1 (2003-08) 2 Reference DTS/ECMA-00232 Keywords PISN, QSIG, stage 3, supplementary service ETSI 650

2、Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloa

3、ded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference s

4、hall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is ava

5、ilable at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all

6、 media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM i

7、s a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 257 V1.1.1 (2003-08) 3 Contents Intellectual Property Rights6 Foreword.6 Brief History.6 1 Scope 7 2 Conformance 7 3 References (normative) 7 4 Definitions8 4.1 External definit

8、ions 8 4.2 Other definitions.8 4.2.1 Co-operating PINX.8 4.2.2 Co-operating User.8 4.2.3 Destination PINX8 4.2.4 Destination User .9 4.2.5 Make Call Request9 4.2.6 Original Call .9 4.2.7 Requested Call 9 4.2.8 Requesting PINX 9 4.2.9 Requesting User9 5 List of acronyms.9 6 Signalling Protocol for th

9、e support of SS-MCR.10 6.1 SS-MCR description.10 6.2 SS-MCR operational requirements.10 6.2.1 Requirements on a Requesting PINX .10 6.2.2 Requirements on a Co-operating PINX 10 6.2.3 Requirements on a Destination PINX.11 6.2.4 Requirements on a Transit PINX11 6.3 SS-MCR coding requirements12 6.3.1 O

10、perations.12 6.3.2 Information elements 15 6.3.2.1 Facility information element .15 6.3.2.2 Other information elements.15 6.3.3 Messages.15 6.4 SS-MCR state definitions.15 6.4.1 States at the Requesting PINX15 6.4.1.1 State MCR-Idle .15 6.4.1.2 State MCR-Active.15 6.4.2 States at the Co-operating PI

11、NX.15 6.4.2.1 State MCR-Idle .15 6.4.2.2 State MCR-Active.15 6.4.3 States at the Destination PINX .16 6.5 SS-MCR signalling procedures 16 6.5.1 Actions at the Requesting PINX.16 6.5.1.1 Normal procedures16 6.5.1.1.1 Activation/deactivation/interrogation16 6.5.1.1.2 Invocation and operation .16 6.5.1

12、.2 Exceptional procedures .16 6.5.1.2.1 Activation/deactivation/interrogation16 6.5.1.2.2 Invocation and operation .16 6.5.2 Actions at the Co-operating PINX16 6.5.2.1 Normal procedures17 6.5.2.1.1 Activation / deactivation / interrogation17 6.5.2.1.2 Invocation and operation .17 ETSI ETSI TS 102 25

13、7 V1.1.1 (2003-08) 4 6.5.2.2 Exceptional procedures .17 6.5.2.2.1 Activation/deactivation/interrogation17 6.5.2.2.2 Invocation and operation .17 6.5.3 Actions at the Destination PINX.18 6.5.3.1 Normal procedures18 6.5.3.1.1 Activation / deactivation / interrogation18 6.5.3.1.2 Invocation and operati

14、on .18 6.5.3.2 Exceptional procedures .18 6.5.3.2.1 Activation / deactivation / interrogation18 6.5.3.2.2 Invocation and operation .18 6.5.4 Actions at a Transit PINX.18 6.6 SS-MCR impact of interworking with public ISDNs.18 6.7 SS-MCR impact of interworking with non-ISDNs 18 6.8 Protocol interactio

15、ns between SS-MCR and other supplementary services and ANFs18 6.8.1 Calling Line Identification Presentation (SS-CLIP) .19 6.8.2 Connected Line Identification Presentation (SS-COLP) 19 6.8.3 Calling/Connected Line Identification Restriction (SS-CLIR).19 6.8.4 Calling Name Identification Presentation

16、 (SS-CNIP).19 6.8.5 Calling Name Identification Presentation (SS-CNIR) 19 6.8.6 Connected Name Identification Presentation (SS-CONP)19 6.8.7 Completion of Call to Busy Subscriber (SS-CCBS).19 6.8.8 Completion of Call on No Reply (SS-CCNR) 19 6.8.9 Call Transfer (SS-CT).19 6.8.10 Call Forwarding Unco

17、nditional (SS-CFU) .19 6.8.11 Call Forwarding Busy (SS-CFB)19 6.8.12 Call Forwarding No Reply (SS-CFNR)20 6.8.13 Call Deflection (SS-CD).20 6.8.14 Path Replacement (ANF-PR)20 6.8.15 Call Offer (SS-CO) .20 6.8.16 Call Intrusion (SS-CI).20 6.8.17 Do not Disturb (SS-DND) 20 6.8.18 Do not Disturb Overri

18、de (SS-DNDO) 20 6.8.19 Advice of Charge (SS-AOC) 20 6.8.20 Recall (SS-RE)20 6.8.21 Call Interception (ANF-CINT) .20 6.8.22 Transit Counter (ANF-TC) .21 6.8.23 Route Restriction Class (ANF-RRC)21 6.8.24 Message Waiting Indication (SS-MWI) .21 6.8.25 Wireless Terminal Location Registration (SS-WTLR).2

19、1 6.8.26 Wireless Terminal Incoming Call (ANF-WTMI).21 6.8.27 Wireless Terminal Outgoing Call (ANF-WTMO)21 6.8.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) .21 6.8.29 Wireless Terminal Authentication of the PISN (SS-WTAN) .21 6.8.30 Private User Mobility Incoming Call (ANF-PUMI).21 6.

20、8.31 Private User Mobility Outgoing Call (ANF-PUMO)21 6.8.32 Private User Mobility Registration (SS-PUMR).21 6.8.33 Common Information (ANF-CMN) .21 6.8.34 Call Priority Interruption (Protection) (SS-CPI(P) 21 6.8.35 Single Step Call Transfer (SS-SSCT) .21 6.3.36 Simple Dialog (SS-SD).22 6.8.37 Glob

21、al Call Identification and Call Linkage (ANF-CIDL).22 6.8.38 Short Message Service (SS-SMS) 22 6.8.39 Message Centre Monitoring (SS-MCM).22 6.8.40 Mailbox Identification (SS-MID) .22 6.9 SS-MCR parameter values (Timers) 22 6.9.1 Timer T1.22 Annex A (normative): Protocol Implementation Conformance St

22、atement (PICS) Proforma 23 A.1 Introduction 23 A.2 Instructions for completing the PICS proforma .23 A.2.1 General structure of the PICS proforma .23 ETSI ETSI TS 102 257 V1.1.1 (2003-08) 5 A.2.2 Additional information.24 A.2.3 Exception information24 A.3 PICS proforma for ECMA-344 24 A.3.1 Implemen

23、tation identification 24 A.3.2 Protocol summary.25 A.3.3 General .25 A.3.4 Procedures 25 A.3.5 Coding 26 A.3.6 Timers 26 Annex B (informative): Examples of Message Sequences.27 B.1 Example message sequences for invocation and operation of SS-MCR28 B.1.1 Example message sequences without prior existi

24、ng connection 28 B.1.2 Example message sequences of a successful communication with a message centre 31 Annex C (informative): Specification and Description Language (SDL) Representation of Procedures32 C.1 SDL representation of SS-MCR at the Requesting PINX33 C.2 SDL representation of SS-MCR at the

25、 Co-operating PINX.34 C.3 SDL representation of SS-MCR at the Destination PINX .35 History 36 ETSI ETSI TS 102 257 V1.1.1 (2003-08) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essen

26、tial IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates

27、 are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ET

28、SI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ECMA on behalf of its members and those of the European Telecommunications Standards Institute (ETSI). Brief History The present document is one of a

29、 series of ECMA Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. It has

30、 been produced under ETSI work item DTS/ECMA-00232. The present document specifies the signalling protocol for use at the Q reference point in support of the Make Call Request supplementary service. The protocol defined in the present document forms part of the PSS1 protocol (informally known as QSI

31、G). The present document is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based conse

32、nsus. ETSI ETSI TS 102 257 V1.1.1 (2003-08) 7 1 Scope The present document specifies the signalling protocol for the support of the Supplementary Service Make Call Request (SS-MCR) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Priv

33、ate Integrated Services Network (PISN). Supplementary service MCR enables a Requesting User to request a Co-operating User to establish a new Requested Call to a Destination User. This new Requested Call between the Co-operating and Destination User can be either a Basic call or a Call Independent S

34、ignalling Connection. The Q reference point is defined in ECMA-133 1. Service specifications are produced in three stages and according to the method specified in ETS 300 387 6. The present document contains the stage 3 specification for the Q reference point and satisfies the requirements identifie

35、d by the stage 1 and stage 2 specifications in ECMA-343 4. The signalling protocol for SS-MCR operates on top of the signalling protocol for basic circuit switched call control, as specified in ECMA-143 2, and uses certain aspects of the generic procedures for the control of supplementary services s

36、pecified in ECMA-165 3. The present document also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-MCR and other supplementary services and ANFs. The present document is applicable to PINXs, which can interconnect to form a PIS

37、N. 2 Conformance In order to conform to the present document, a PINX shall satisfy the requirements identified in the Protocol Implementation Conformance Statement (PICS) proforma in annex A. Conformance to the present document includes conforming to those clauses that specify protocol interactions

38、between SS-MCR and other supplementary services and ANFs for which signalling protocols at the Q reference point are supported in accordance with the stage 3 standards concerned. 3 References (normative) The following standards contain provisions, which, through reference in this text, constitute pr

39、ovisions of the present document. All standards are subject to revision, and parties to agreements based on the present document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In the case of references to ECMA Standards that are a

40、ligned with ISO/IEC International Standards, the number of the appropriate ISO/IEC International Standard is given in brackets after the ECMA reference. 1 ECMA-133: “Private Integrated Services Network (PISN) - Reference Configuration for PISN Exchanges (PINX)“, (International Standard ISO/IEC 11579

41、-1). 2 ECMA-143: “Private Integrated Services Network (PISN) - Circuit Mode Bearer Services - Inter-Exchange Signalling Procedures and Protocol (QSIG-BC)“, (International Standard ISO/IEC 11572). 3 ECMA-165: “Private Integrated Services Network (PISN) - Generic Functional Protocol for the Support of

42、 Supplementary Services - Inter-Exchange Signalling Procedures and Protocol (QSIG-GF)“, (International Standard ISO/IEC 11582). 4 ECMA-343: “Private Integrated Services Network (PISN) - Specification, Functional Model and Information Flows - Make Call Request Supplementary Service (MCRSD)“. 5 ECMA-3

43、45: “Private Integrated Services Network (PISN) - Use of QSIG for Message Centre Access (MCA) Profile Standard“. ETSI ETSI TS 102 257 V1.1.1 (2003-08) 8 6 ETSI ETS 300 387: “Private Telecommunication Network (PTN); Method for the specification of basic and supplementary services“. 7 ITU-T Recommenda

44、tion I.112: “Vocabulary of terms for ISDNs“. 8 ITU-T Recommendation I.210: “Principles of telecommunication services supported by an ISDN and the means to describe them“. 9 ITU-T Recommendation Q.950: “Digital Subscriber Signalling System No. 1 (DSS1) - Supplementary services protocols, structure an

45、d general principles“. 10 ITU-T Recommendation Z.100: “Specification and Description Language (SDL)“. 4 Definitions For the purposes of the present document, the following terms and definitions apply. 4.1 External definitions The present document uses the following terms and definitions given in oth

46、er documents apply: Application Protocol Data Unit (APDU): See ECMA-165 3. call, basic call: See ECMA-165 3. Call Independent Signalling Connection (CISC): See ECMA-165 3. call-independent: See ECMA-165 3. gateway PINX: See ECMA-165 3. originating PINX: See ECMA-165 3. Private Integrated Services Ne

47、twork (PISN): See ECMA-133 1. Private Integrated services Network eXchange (PINX): See ECMA-133 1. signalling: See ITU-T Recommendation I.112 7. Supplementary Service (SS): See ITU-T Recommendation I.210 8. Supplementary Service Control (SSC) entity: See ECMA-165 3. terminating PINX: See ECMA-165 3.

48、 transit PINX: See ECMA-165 3. 4.2 Other definitions 4.2.1 Co-operating PINX The PINX where the Co-operating User is located. 4.2.2 Co-operating User The user who receives a Make Call Request and who shall set up a new Requested Call to the Destination User. 4.2.3 Destination PINX The PINX where the

49、 Destination User is located. ETSI ETSI TS 102 257 V1.1.1 (2003-08) 9 4.2.4 Destination User The called user of the Requested Call i.e. the user to whom the Co-operating User shall establish a Requested Call. 4.2.5 Make Call Request A request from the Requesting User for a new call (i.e. Requested Call) between a Co-operating User and a Destination User. 4.2.6 Original Call The call between the Requesting User and the Co-operating User. The Original Call can be either a Basic call or a Call Independent Signalling Connectio