ETSI TS 102 255-2003 Private Integrated Services Network (PISN) Inter-exchange Signalling Protocol Message Centre Monitoring and Mailbox Identification supplementary service《专用综合业务.pdf

《ETSI TS 102 255-2003 Private Integrated Services Network (PISN) Inter-exchange Signalling Protocol Message Centre Monitoring and Mailbox Identification supplementary service《专用综合业务.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 255-2003 Private Integrated Services Network (PISN) Inter-exchange Signalling Protocol Message Centre Monitoring and Mailbox Identification supplementary service《专用综合业务.pdf（91页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 255 V1.1.1 (2003-08)Technical Specification Private Integrated Services Network (PISN);Inter-exchange Signalling Protocol;Message Centre Monitoring andMailbox Identification supplementary serviceETSI ETSI TS 102 255 V1.1.1 (2003-08) 2 Reference DTS/ECMA-00230 Keywords PISN, QSIG, stage

2、3, supplementary service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of t

3、he present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). I

4、n case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of th

5、is and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restric

6、tion extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for th

7、e benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 255 V1.1.1 (2003-08) 3 Contents Intellectual Property Rights8 Foreword.8 Brief history8 1 Scope 9 2 Conformance 9 3 References (normative) 9 4

8、Definitions10 4.1 External definitions 10 4.2 Other definitions.11 4.2.1 Message Centre PINX 11 4.2.2 Served User PINX 11 5 Acronyms .11 6 Signalling protocol for the support of SS-MCM12 6.1 SS-MCM description12 6.2 SS-MCM operational requirements12 6.2.1 Requirements on a Message Centre PINX12 6.2.

9、2 Requirements on a Served User PINX13 6.2.3 Requirements on a Transit PINX13 6.3 SS-MCM coding requirements.13 6.3.1 Operations.13 6.3.2 Information elements 23 6.3.2.1 Facility information element .23 6.3.2.2 Other information elements.23 6.3.3 Messages.23 6.4 SS-MCM state definitions 24 6.4.1 Sta

10、tes at the Message Centre PINX 24 6.4.1.1 State MCM-MC-idle .24 6.4.1.2 State MCM-MC-wait 24 6.4.2 States at the Served User PINX 24 6.4.2.1 State MCM-SU-idle 24 6.4.2.2 State MCM-SU-wait .24 6.4.2.3 State MCM-SU-update24 6.5 SS-MCM signalling procedures .24 6.5.1 Actions at the Message Centre PINX

11、.24 6.5.1.1 Normal procedures25 6.5.1.1.1 Activation, deactivation and interrogation.25 6.5.1.1.2 Incoming New Message 25 6.5.1.1.3 No New Messages of a Message Type available at the Served Users mailbox 26 6.5.1.1.4 Update of Message Centre Information (update procedure)26 6.5.1.1.5 Update request

12、from the Served User27 6.5.1.1.6 Mailbox-full indication28 6.5.1.2 Exceptional procedures .28 6.5.1.2.1 Activation, deactivation and interrogation.28 6.5.1.2.2 Incoming New Message 28 6.5.1.2.3 No New Messages of a Message Type available at the Served Users mailbox 28 6.5.1.2.4 Update of Message Cen

13、tre Information.28 6.5.1.2.5 Update request from the Served User28 6.5.2 Actions at the Served User PINX .29 6.5.2.1 Normal procedures29 6.5.2.1.1 Activation, deactivation and interrogation.29 6.5.2.1.2 Incoming New Message 29 6.5.2.1.3 No New Messages of a Message Type available at the Served Users

14、 mailbox 29 ETSI ETSI TS 102 255 V1.1.1 (2003-08) 4 6.5.2.1.4 Update of Message Centre Information (update procedure)29 6.5.2.1.5 Update request from the Served User30 6.5.2.1.6 Mailbox-full indication30 6.5.2.2 Exceptional procedures .30 6.5.2.2.1 Activation, deactivation and interrogation.30 6.5.2

15、.2.2 Incoming New Message 30 6.5.2.2.3 No New Messages of a Message Type available at the Served Users mailbox 30 6.5.2.2.4 Update of Message Centre Information (update procedure)31 6.5.2.2.5 Update request from the Served User31 6.5.3 Actions at a Transit PINX.31 6.6 SS-MCM impact of interworking w

16、ith public ISDNs31 6.7 SS-MCM impact of interworking with non-ISDNs31 6.8 Protocol interactions between SS-MCM and other supplementary services and ANFs.31 6.8.1 Calling Line Identification Presentation (SS-CLIP) .31 6.8.2 Connected Line Identification Presentation (SS-COLP) 31 6.8.3 Calling/Connect

17、ed Line Identification Restriction (SS-CLIR).31 6.8.4 Calling Name Identification Presentation (SS-CNIP).31 6.8.5 Calling/Connected Name Identification Restriction (SS-CNIR) 32 6.8.6 Connected Name Identification Presentation (SS-CONP)32 6.8.7 Call Forwarding Unconditional (SS-CFU) .32 6.8.8 Call Fo

18、rwarding Busy (SS-CFB)32 6.8.9 Call Forwarding No Reply (SS-CFNR)32 6.8.10 Path Replacement (ANF-PR)32 6.8.11 Call Transfer (SS-CT).32 6.8.12 Call Deflection (SS-CD).32 6.8.13 Completion of Calls to Busy Subscribers (SS-CCBS)32 6.8.14 Completion of Calls on No Reply (SS-CCNR).32 6.8.15 Call Offer (S

19、S-CO) .32 6.8.16 Do Not Disturb (SS-DND) .32 6.8.17 Do Not Disturb Override (SS-DNDO)32 6.8.18 Call Intrusion (SS-CI).32 6.8.19 Advice of Charge (SS-AOC) 33 6.8.20 Recall (SS-RE)33 6.8.21 Call Interception (SS-CINT).33 6.8.22 Transit Counter (ANF-TC) .33 6.8.23 Route Restriction Class (ANF-RRC)33 6.

20、8.24 Message Waiting Indication (SS-MWI) .33 6.8.25 Wireless Terminal Location Registration (SS-WTLR).33 6.8.26 Wireless Terminal Incoming Call (SS-WTMI).33 6.8.27 Wireless Terminal Outgoing Call (SS-WTMO) .33 6.8.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) .33 6.8.29 Wireless Termin

21、al Authentication of the PISN (SS-WTAN) .33 6.8.30 Common Information (SS-CMN).33 6.8.31 Call Priority Interruption (Protection) (SS-CPI(P) 34 6.8.32 Private User Mobility Incoming Call (ANF-PUMI).34 6.8.33 Private User Mobility Outgoing Call (ANF-PUMO)34 6.8.34 Private User Mobility Registration (S

22、S-PUMR).34 6.8.35 Single Step Call Transfer (SS-SSCT) .34 6.8.36 Simple Dialog (SS-SD).34 6.8.37 Call Identification and Call Linkage (ANF-CIDL).34 6.8.38 Short Message Service (SS-SMS) 34 6.8.39 Make Call Request (SS-MCR)34 6.8.40 Mailbox Identification (SS-MID) .34 6.9 SS-MCM parameter values (tim

23、ers).34 6.9.1 Timer T1.34 6.9.2 Timer T2.35 6.9.3 Timer T3.35 7 Signalling protocol for the support of SS-MID35 7.1 SS-MID description35 7.2 SS-MID operational requirements35 7.2.1 Requirements on a Message Centre PINX35 ETSI ETSI TS 102 255 V1.1.1 (2003-08) 5 7.2.2 Requirements on a Served User PIN

24、X35 7.2.3 Requirements on a Transit PINX35 7.3 SS-MID coding requirements.35 7.3.1 Operations.35 7.3.2 Information elements 38 7.3.2.1 Facility information element .38 7.3.2.2 Other information elements.38 7.3.3 Messages.38 7.4 SS-MID state definitions 38 7.4.1 States at the Message Centre PINX 38 7

25、.4.1.1 State MID-MC-idle .38 7.4.1.2 State MID-MC-wait 38 7.4.2 States at the Served User PINX 39 7.4.2.1 State MID-SU-idle 39 7.4.2.2 State MID-SU-wait .39 7.5 SS-MID signalling procedures .39 7.5.1 Actions at the Message Centre PINX .39 7.5.1.1 Normal procedures39 7.5.1.1.1 Activation, deactivatio

26、n and interrogation.39 7.5.1.1.2 Invocation and operation .39 7.5.1.2 Exceptional procedures .40 7.5.1.2.1 Activation, deactivation and interrogation.40 7.5.1.2.2 Invocation and operation .40 7.5.2 Actions at the Served User PINX .40 7.5.2.1 Normal procedures40 7.5.2.1.1 Activation, deactivation and

27、 interrogation.40 7.5.2.1.2 Invocation and operation .40 7.5.2.2 Exceptional procedures .41 7.5.2.2.1 Activation, deactivation and interrogation.41 7.5.2.2.2 Invocation and operation .41 7.5.3 Actions at a Transit PINX.41 7.6 SS-MID impact of interworking with public ISDNs41 7.7 SS-MID impact of int

28、erworking with non-ISDNs41 7.8 Protocol interactions between SS-MID and other supplementary services and ANFs.41 7.8.1 Calling Line Identification Presentation (SS-CLIP) .41 7.8.2 Connected Line Identification Presentation (SS-COLP) 41 7.8.3 Calling/Connected Line Identification Restriction (SS-CLIR

29、).41 7.8.4 Calling Name Identification Presentation (SS-CNIP).42 7.8.5 Calling/Connected Name Identification Restriction (SS-CNIR) 42 7.8.6 Connected Name Identification Presentation (SS-CONP)42 7.8.7 Call Forwarding Unconditional (SS-CFU) .42 7.8.8 Call Forwarding Busy (SS-CFB)42 7.8.9 Call Forward

30、ing No Reply (SS-CFNR)42 7.8.10 Path Replacement (ANF-PR)42 7.8.11 Call Transfer (SS-CT).42 7.8.12 Call Deflection (SS-CD).42 7.8.13 Completion of Calls to Busy Subscribers (SS-CCBS)42 7.8.14 Completion of Calls on No Reply (SS-CCNR).42 7.8.15 Call Offer (SS-CO) .42 7.8.16 Do Not Disturb (SS-DND) .4

31、2 7.8.17 Do Not Disturb Override (SS-DNDO)42 7.8.18 Call Intrusion (SS-CI).43 7.8.19 Advice of Charge (SS-AOC) 43 7.8.20 Recall (SS-RE)43 7.8.21 Call Interception (SS-CINT).43 7.8.22 Transit Counter (ANF-TC) .43 7.8.23 Route Restriction Class (ANF-RRC)43 7.8.24 Message Waiting Indication (SS-MWI) .4

32、3 7.8.25 Wireless Terminal Location Registration (SS-WTLR).43 7.8.26 Wireless Terminal Incoming Call (SS-WTMI).43 7.8.27 Wireless Terminal Outgoing Call (SS-WTMO) .43 7.8.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) .43 ETSI ETSI TS 102 255 V1.1.1 (2003-08) 6 7.8.29 Wireless Terminal

33、Authentication of the PISN (SS-WTAN) .43 7.8.30 Common Information (SS-CMN).43 7.8.31 Call Priority Interruption (Protection) (SS-CPI(P) 43 7.8.32 Private User Mobility Incoming Call (ANF-PUMI).44 7.8.33 Private User Mobility Outgoing Call (ANF-PUMO)44 7.8.34 Private User Mobility Registration (SS-P

34、UMR).44 7.8.35 Single Step Call Transfer (SS-SSCT) .44 7.8.36 Simple Dialog (SS-SD).44 7.8.37 Call Identification and Call Linkage (ANF-CIDL).44 7.8.38 Short Message Service (SS-SMS) 44 7.8.39 Make Call Request (SS-MCR)44 7.8.40 Message Centre Monitoring (SS-MCM).44 7.9 SS-MID parameter values (time

35、rs).44 7.9.1 Timer T1.44 7.9.2 Timer T2.45 Annex A (normative): Protocol Implementation Conformance Statement (PICS) Proforma 46 A.1 Introduction 46 A.2 Instructions for completing the PICS proforma .46 A.2.1 General structure of the PICS proforma .46 A.2.2 Additional information.47 A.2.3 Exception

36、information47 A.3 PICS proforma for SS-MCM .47 A.3.1 Implementation identification 47 A.3.2 Protocol summary.48 A.3.3 General .48 A.3.4 Procedures 48 A.3.5 Coding 49 A.3.6 Timers 50 A.4 PICS proforma for SS-MID .51 A.4.1 Implementation identification 51 A.4.2 Protocol summary.51 A.4.3 General .51 A.

37、4.4 Procedures 52 A.4.5 Coding 52 A.4.6 Timers 52 Annex B (informative): Examples of Message Sequences.53 B.1 Example message sequence for SS-MCM .54 B.1.1 Example message sequence for activation, deactivation and interrogation54 B.1.2 Example message sequence for the arrival of a New Message 57 B.1

38、.3 Example message sequence for the sending of the NoNewMessage indication.58 B.1.4 Example message sequence for the Update of Message Centre Information (update procedure)59 B.1.5 Example message sequence for the SS-MCM Update request from the Served user.60 B.1.6 Example message sequence for the S

39、S-MCM Mailbox-Full indication.61 B.2 Example message sequences for interworking between for SS-MCM and SS-MWI 62 B.2.1 SS-MCM is implemented at the Message Centre PINX.62 B.2.2 SS-MCM is implemented at the Served User PINX 66 B.3 Example message sequence for SS-MID .69 B.3.1 Example message sequence

40、 for identification of a specific Served User Mailbox.69 B.3.2 Example message sequence for authentication of a Served User at a specific Mailbox.70 Annex C (informative): Specification and Description Language (SDL) Representation of Procedures71 C.1 SDL representation of SS-MCM at the Message Cent

41、re PINX .71 C.2 SDL representation of SS-MCM at the Served User PINX .78 ETSI ETSI TS 102 255 V1.1.1 (2003-08) 7 C.3 SDL representation of SS-MID at the Message Centre PINX .83 C.4 SDL representation of SS-MID at the Served User PINX .86 Annex D (informative): List of Message Types88 D.1 Telephony T

42、ype Messages .88 D.1.1 Speech 88 D.1.2 UnrestrictedDigitalInformation 88 D.1.3 Audio3100Hz .88 D.1.4 Telephony.88 D.1.5 Teletex88 D.1.6 TelefaxGroup4Class1.88 D.1.7 VideotextSyntaxBased .88 D.1.8 Videotelephony 88 D.1.9 TelefaxGroup2-3 88 D.2 Data Type Messages.89 D.2.1 Email 89 D.2.2 Video89 D.2.3

43、FileTransfer 89 D.2.4 ShortMessageService .89 D.3 Combination of Messages 89 D.4 Additional Message Types .89 D.4.1 allServices 90 D.4.2 multimediaUnknown90 D.4.3 serviceUnknown.90 History 91 ETSI ETSI TS 102 255 V1.1.1 (2003-08) 8 Intellectual Property Rights IPRs essential or potentially essential

44、 to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified t

45、o ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be g

46、iven as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ECMA on behalf of its members and those of the Euro

47、pean Telecommunications Standards Institute (ETSI). Brief history The present document is one of a series of ECMA Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the f

48、ramework of International Standards for Open Systems Interconnection as defined by ISO/IEC. It has been produced under ETSI work item DTS/ECMA-00230. The present document specifies the signalling protocol for use at the Q reference point in support of the Message Centre Monitoring supplementary serv

49、ice as well as the Mailbox Identification supplementary service. The protocol defined in the present document forms part of the PSS1 protocol (informally known as QSIG). SS-MCM is based on SS-MWI and includes its entire functionality. The interoperability with SS-MWI is therefore guaranteed. Compared to SS-MWI, SS-MCM offers an enhanced functionality for monitoring status changes of messages stored in the Served Users Mailbox as follows: individual activation and deactivation for the monitoring of messages of different Message Type(s) within the Mailbox as well as inter