ETSI TS 102 189-1-2004 Satellite Earth Stations and Systems (SES) Regenerative Satellite Mesh - A (RSM-A) SMAC SLC layer specification Part 1 General description (V1 1 2)《卫星地面站和系统(.pdf

《ETSI TS 102 189-1-2004 Satellite Earth Stations and Systems (SES) Regenerative Satellite Mesh - A (RSM-A) SMAC SLC layer specification Part 1 General description (V1 1 2)《卫星地面站和系统(.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 189-1-2004 Satellite Earth Stations and Systems (SES) Regenerative Satellite Mesh - A (RSM-A) SMAC SLC layer specification Part 1 General description (V1 1 2)《卫星地面站和系统(.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 189-1 V1.1.2 (2004-07)Technical Specification Satellite Earth Stations and Systems (SES);Regenerative Satellite Mesh - A (RSM-A);SMAC/SLC layer specification;Part 1: General descriptionETSI ETSI TS 102 189-1 V1.1.2 (2004-07) 2 Reference RTS/SES-00210-1 Keywords air interface, broadband,

2、 IP, satellite, multimedia ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of

3、 the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).

4、 In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of

5、this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restr

6、iction extend to reproduction in all media. European Telecommunications Standards Institute 2004. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for

7、the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 189-1 V1.1.2 (2004-07) 3 Contents Intellectual Property Rights5 Foreword.5 1 Scope 6 2 References 6 3 Definitions and abbreviations.7 3.1 Def

8、initions7 3.2 Abbreviations .7 4 Network definition and protocol architecture.8 4.1 Regenerative Satellite Mesh - A network architecture .8 4.1.1 Network elements .8 4.1.2 Network interfaces9 4.2 ST functional description .9 4.2.1 Network access control functions .9 4.2.2 Packet routing and transfer

9、 functions9 4.2.3 Radio Resource Management functions .10 4.2.4 Network management functions .10 4.3 ST operational states 10 4.3.1 ST level states .10 4.3.1.1 ST state description.10 4.3.1.2 State transitions relative to system information reception.12 4.3.1.3 ST transmission barring 12 4.3.2 Port

10、level states .14 4.3.2.1 State description14 4.3.2.2 Port level services .14 4.4 ST protocol architecture .15 4.4.1 Data plane architecture .15 4.4.2 CoS and related concepts15 4.5 Layer-wise functional partitioning .17 4.5.1 Data link layer.17 4.5.1.1 Satellite Link Control sublayer .17 4.5.1.2 Sat

11、ellite Medium Access Control sublayer .17 4.5.2 Physical layer18 4.6 Procedure definitions18 4.6.1 Procedures in idle mode18 4.6.1.1 System information reception .18 4.6.1.2 Transfer and reception of management traffic 18 4.6.1.3 SLC session initiation on destination side.19 4.6.2 Procedures - trans

12、mission side19 4.6.2.1 Address resolution.19 4.6.2.2 Connection setup, modification, and release.19 4.6.2.3 Segmentation and packetization19 4.6.2.4 Satellite Link Control session setup and teardown19 4.6.2.5 Bandwidth management - resource allocation and queue management20 4.6.2.5.1 Rate transmissi

13、ons .20 4.6.2.5.2 Volume oriented uplink data channels 20 4.6.2.5.3 Contention mode access 20 4.6.2.5.4 Persistent aloha20 4.6.3 Procedures - reception side .20 4.6.3.1 Connection setup.20 4.6.3.2 Session initiation .20 4.6.3.3 Reassembly .21 4.6.4 Power control21 4.7 Security Access Module - functi

14、onal description.21 4.8 ST types22 ETSI ETSI TS 102 189-1 V1.1.2 (2004-07) 4 Annex A (informative): Bibliography.23 History 24 ETSI ETSI TS 102 189-1 V1.1.2 (2004-07) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The in

15、formation pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from t

16、he ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI S

17、R 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document is part 1 of a multi-par

18、t deliverable covering Regenerative Satellite Mesh - A (RSM-A) air interface SMAC/SLC layer specification, as identified below: Part 1: “General description“; Part 2: “Satellite Medium Access Control and Satellite Link Control detailed specification“; Part 3: “ST-SAM Interface specification“. ETSI E

19、TSI TS 102 189-1 V1.1.2 (2004-07) 6 1 Scope The present document is an introduction to the SMAC/SLC layer specification for the TC-SES BSM Regenerative Satellite Mesh - A (RSM-A) air interface family. In particular it contains the description of the overall network and SMAC/SLC protocol architecture

20、 of the BSM Regenerative Satellite Mesh - A (RSM-A) air interface as seen from the ST. It also describes the various interfaces between the ST and other network elements and the relation between the layers in the ST logical protocol architecture as are discussed in the present document as well as th

21、e interactions with other layers in the BSM Regenerative Satellite Mesh - A (RSM-A) protocol architecture. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date

22、of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at

23、 http:/docbox.etsi.org/Reference. 1 ETSI TS 102 188-1: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 1: General description“. 2 ETSI TS 102 188-5: “Satellite Earth Stations and Systems (SES); Regenerative Satell

24、ite Mesh - A (RSM-A) air interface; Physical layer specification; Part 5: Radio transmission and reception“. 3 ETSI TS 102 189-2: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A); SMAC/SLC layer specification; Part 2: Satellite Medium Access Control and Satellite

25、Link Control detailed specification“. 4 ETSI TR 101 984: “Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia; Services and Architectures“. 5 ETSI TS 102 189-3: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A); SMAC/SLC layer specification;

26、Part 3: ST-SAM Interface specification“. 6 ETSI TS 102 188-2: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 2: Frame structure“. 7 ETSI TS 102 188-3: “Satellite Earth Stations and Systems (SES); Regenerative Sat

27、ellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 3: Channel coding“. 8 ETSI TS 102 188-4: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 4: Modulation“. 9 ETSI TS 102 188-6: “Satellite Ea

28、rth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 6: Radio link control“. 10 ETSI TS 102 188-7: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Pa

29、rt 7: Synchronization“. ETSI ETSI TS 102 189-1 V1.1.2 (2004-07) 7 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Network Operations Control Centre (NOCC): centre that controls the access of the satellite terminal t

30、o an IP network and also provides element management functions and control of the address resolution and resource management functionality satellite payload: part of the satellite that provides air interface functions NOTE: The satellite payload operates as a packet switch that provides direct unica

31、st and multicast communication between STs at the link layer. Satellite Terminal (ST): terminal that is installed in the user premises terrestrial host: entity on which application level programs are running NOTE: It may be connected directly to the Satellite Terminal or through one or more networks

32、. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACF Access Control Field ARP Address Resolution Protocol BoD Bandwidth-on-DemandBSM Broadband Satellite Multimedia CoS Class of Service CRC Cyclic Redundancy Check ESN Equipment Serial Number GEO Geosync

33、hronous Earth Orbit HVUL High Volume UpLink IP Internet ProtocolLLDC Link Layer Data Confidentiality MAC Medium Access Control MIP Management Information Packet NIP Network Information Packet NOCC Network Operations Control Centre O substate = ACTIVE). MAINTENANCE: The ST port goes into this state o

34、n direct command from the NOCC. In this state it can still do connection setup/teardown, routing etc, but is prohibited from advertising these services to the local networks or to other STs. This state is to be used for diagnostic purposes only. OUT-OF-SERVICE: An ST port goes into out-of-service st

35、ate when the ST overall goes out of the active state or into one of the inactive substates of the active state or due to failure/deconfiguration of the port itself. In this state, the ST does not provide any services to either a local user or a remote ST. 4.3.2.2 Port level services Packet transit:

36、The service of delivering packets over the RSM-A system to other networks with/without QoS guarantees. Routing: The service of identifying routes available over the RSM-A system and advertising them locally. Interaction with terrestrial routing protocols to allow seamless IP routing over the RSM-A s

37、ystem. Connection setup: The service of setting up pre-scheduled/on-demand connections providing “virtual circuit-like“ channels over the RSM-A system by negotiating with the network. Multicast group setup: The service of setting up multicast groups for efficient point to multipoint communication ov

38、er the RSM-A system. ETSI ETSI TS 102 189-1 V1.1.2 (2004-07) 154.4 ST protocol architecture 4.4.1 Data plane architecture The RSM-A network architecture provides a split between Satellite dependent functions and Satellite independent functions. The purpose of this split is as follows: separate the s

39、atellite specific aspects (i.e. a Ka-band GEO satellite with a packet switch) from the satellite independent higher layer. This separation is designed to permit future market developments, in particular IP enhancements; provide flexibility for the addition of more complex market segment-based soluti

40、ons (e.g. PEPs and Application Gateways). With some exceptions, functions in a satellite terminal can be conceptually categorized as link-specific and link-non-specific. RSM-A provides an interface to its transport core that is common for all network services, applications, and market segments. This

41、 interface is termed the Satellite Independent-Service Access Point (SI-SAP). In the OSI layering model, the SI-SAP is positioned between the link and network layers. With the SI-SAP so positioned, elements above the SI-SAP can, and indeed should, be designed without specific knowledge of the suppor

42、ting link layer. Hence the introduction of the SI-SAP into the system design affords the following benefits: Elements above the SI-SAP can be ported with greater ease to new satellite systems. Extensibility to support new higher-layer functionalities without major re-engineering of existing designs.

43、 This clause describes the user data transmission plane in the RSM-A ST. The functions of the various layers and the various SAPs are described below. The architecture for the baseline ST configurations is shown in figure 4.4. The RSM-A Core Layers consist of the SLC, MAC and PHY layers. The IP Adap

44、tation layers include the IP Plus Layer and the Transport Layer Performance Enhancing Proxies (PEP). Core Layers SD adaptation SI adaptation Ethernet or USB PHY SMAC SLC SD adaptation SI adaptation IP PHY MEDIUM ACCESS CONTROL PHY PHY To/from Host To/from Host U interface U interface SATELLITE SATEL

45、LITE TERMINAL SI-SAP IP Plus ARP Transport Protocols IP IP Plus ARP Transport Protocols Application Protocols Routing Application Protocols Routing SATELLITE TERMINAL Ethernet or USB SLC SMAC SI-SAP P interface T interface T interface Figure 4.4: Simplified general RSM-A User Data Protocol reference

46、 architecture 4.4.2 CoS and related concepts Quality of Service (QoS) is the abstract notion of how well a particular sort of traffic is carried to its destination, relative to the needs of that traffic. Because, in general, different kinds of traffic have different QoS requirements, traffic is cate

47、gorized into different Classes of Service (singular: CoS). Traffic of a given CoS may be carried in different ways with the goal of providing the appropriate QoS for such traffic. ETSI ETSI TS 102 189-1 V1.1.2 (2004-07) 16In RSM-A the CoSes are directly supported by User Data Transport Services (sin

48、gular: UDTS), which are general characterizations of how traffic is queued and sent. The specific method by which a RSM-A packet is sent is termed a Packet Delivery Service (PDS). The PDS selected for transmitting a packet is related to the UDTS of the associated data traffic, but not in a strictly

49、one-to-one fashion. STs may operate in High Volume UpLink (HVUL) or Bandwidth-on-Demand (BoD) mode. Both modes of operation are described in BSM RSM-A SMAC/SLC Layer Specification TS 102 189-2 3. The association of these concepts is shown in figure 4.5 for BoD. The complete set of rules for mapping UDTS to PDS are given in BSM RSM-A SMAC/SLC Layer Specification TS 102 189-2 3. Classifier (CoS Assignment)CoS-to-UDTS TranslationUDTS-to-PDS mappingSI-SAP (SSTI)UDTS mapping to queuesSLC-SAPACK-RETConnectionlessservicesLVLLNPBHPBCRWB