ETSI TS 102 149-3-2006 Broadband Radio Access Networks (BRAN) HIPERACCESS Conformance Testing for the Data Link Control (DLC) layer Part 3 Abstract Test Suite (ATS) (V1 3 1 Include.pdf

《ETSI TS 102 149-3-2006 Broadband Radio Access Networks (BRAN) HIPERACCESS Conformance Testing for the Data Link Control (DLC) layer Part 3 Abstract Test Suite (ATS) (V1 3 1 Include.pdf》由会员分享，可在线阅读，更多相关《ETSI TS 102 149-3-2006 Broadband Radio Access Networks (BRAN) HIPERACCESS Conformance Testing for the Data Link Control (DLC) layer Part 3 Abstract Test Suite (ATS) (V1 3 1 Include.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TS 102 149-3 V1.3.1 (2006-06)Technical Specification Broadband Radio Access Networks (BRAN);HIPERACCESS;Conformance Testing for the Data Link Control (DLC) layer;Part 3: Abstract Test Suite (ATS)floppy3 ETSI ETSI TS 102 149-3 V1.3.1 (2006-06) 2 Reference RTS/BRAN-003T002-3R2 Keywords Access, A

2、TS, control, data, HIPERACCESS, radio, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice

3、Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Do

4、cument Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on th

5、e current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be re

6、produced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2006. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Me

7、mbers. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 149-3 V1.3.1 (2006-06) 3 Contents Intellectual Prop

8、erty Rights5 Foreword.5 1 Scope 6 2 References 6 3 Definitions and abbreviations.7 3.1 Definitions7 3.2 Abbreviations .7 4 Abstract Test Method (ATM).8 4.1 Test architecture .8 4.2 Test configurations.9 4.2.1 Test configurations for AT .9 4.2.2 Test configurations for AP9 5 Untestable Test Purposes

9、(TP) .10 6 ATS conventions10 6.1 Naming conventions.10 6.1.1 Declarations part.10 6.1.1.1 General10 6.1.1.2 Test suite operations definition .10 6.1.1.3 Test suite parameter declarations 10 6.1.1.4 Test case selection expression definition 11 6.1.1.5 Test suite constant declarations.11 6.1.1.6 Test

10、suite variable declarations .11 6.1.1.7 Test case variable declarations11 6.1.1.8 Timer declarations.11 6.1.1.9 ASP type definitions .11 6.1.1.10 PDU type definitions.12 6.1.1.11 CM type definitions.12 6.1.1.12 Alias definitions 12 6.1.2 Constraints part.12 6.1.2.1 General12 6.1.3 Dynamic part 12 6.

11、1.3.1 General12 6.1.3.2 Test Case (TC) identifier.12 6.1.3.3 Test step identifier.13 6.1.3.4 Default identifier .13 6.1.3.5 Label identifier13 6.1.3.6 ATS abbreviations.14 6.2 Implementation conventions 14 6.2.1 Declaration part 14 6.2.2 Constraint part 14 6.2.3 Dynamic part 14 7 Abstract testing se

12、rvice primitives .15 Annex A (normative): Abstract Test Suite (ATS) .16 A.1 The TTCN Graphical form (TTCN.GR) 16 A.2 The TTCN Machine Processable form (TTCN.MP)16 A.3 The ASN.1 specification of the Hiperaccess protocol16 Annex B (normative): Partial PIXIT proforma for HA DLC AT .17 B.1 Identificatio

13、n summary.17 ETSI ETSI TS 102 149-3 V1.3.1 (2006-06) 4 B.2 ATS summary 17 B.3 Test laboratory17 B.4 Client identification18 B.5 SUT 18 B.6 Protocol layer information18 B.6.1 Protocol identification 18 B.6.2 IUT information .19 Annex C (normative): Partial PIXIT proforma for HA DLC AP .26 C.1 Identif

14、ication summary.26 C.2 ATS summary 26 C.3 Test laboratory26 C.4 Client identification27 C.5 SUT 27 C.6 Protocol layer information27 C.6.1 Protocol identification 27 C.6.2 IUT information .28 Annex D (normative): PCTR Proforma for HA DLC AT35 D.1 Identification summary.35 D.1.1 Protocol conformance t

15、est report35 D.1.2 IUT identification.35 D.1.3 Testing environment.35 D.1.4 Limits and reservation36 D.1.5 Comments.36 D.2 IUT Conformance status 36 D.3 Static conformance summary .36 D.4 Dynamic conformance summary36 D.5 Static conformance review report.37 D.6 Test campaign report37 D.7 Observation

16、s.39 Annex E (normative): PCTR Proforma for HA DLC AP 40 E.1 Identification summary.40 E.1.1 Protocol conformance test report40 E.1.2 IUT identification.40 E.1.3 Testing environment.40 E.1.4 Limits and reservation41 E.1.5 Comments.41 E.2 IUT Conformance status 41 E.3 Static conformance summary .41 E

17、.4 Dynamic conformance summary41 E.5 Static conformance review report.42 E.6 Test campaign report42 E.7 Observations.44 Annex F (informative): Bibliography.45 ETSI ETSI TS 102 149-3 V1.3.1 (2006-06) 5 History 46 Intellectual Property Rights IPRs essential or potentially essential to the present docu

18、ment may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of

19、 ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the exist

20、ence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Broadband Radio Access Networks (BRAN). The pr

21、esent document is part 3 of a multi-part covering Broadband Radio Access Networks (BRAN); HIPERACCESS; Data Link Control (DLC) layer as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS) proforma“; Part 2: “Test Suite Structure and Test Purposes (TSS Part 3: “Abstract Te

22、st Suite (ATS)“. ETSI ETSI TS 102 149-3 V1.3.1 (2006-06) 6 1 Scope The present document contains the Abstract Test Suite (ATS) to test the BRAN HIPERACCESS; Data Link Control (DLC) layer. The objective of the present document is to provide a basis for conformance tests for BRAN HIPERACCESSequipment

23、giving a high probability of air interface inter-operability between different manufacturers BRAN HIPERACCESSequipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 3 and ISO/IEC 9646-2 4) as well as the ETSI rules for conformance testing (ETS 300 406 2) are used as a

24、basis for the test methodology. - Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. - Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) proforma of the AT side ATS. - Annex B provides the Partial Protocol Implementation Extra Inf

25、ormation for Testing (PIXIT) proforma of the AP side ATS. - Annex D provides the Protocol Conformance Test Report (PCTR) proforma of the AT side ATS. - Annex E provides the Protocol Conformance Test Report (PCTR) proforma of the AP side ATS. 2 References The following documents contain provisions wh

26、ich, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, t

27、he latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ETSI TS 102 000: “Broadband Radio Access Networks (BRAN); HIPERACCESS; DLC protocol specification“. 2 ETSI ETS 300 406: “ Methods

28、 for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology “. 3 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 4 ISO/IEC 9646-2: “Infor

29、mation technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 2: Abstract test suite specification“. 5 ISO/IEC 9646-3: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 3: The tree and tabular combi

30、ned notation“. 6 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Protocol profile test specification“. 7 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and frame

31、work - Part 7: Implementation conformance statement“. ETSI ETSI TS 102 149-3 V1.3.1 (2006-06) 7 8 ETSI TS 102 149-2: “Broadband Radio Access Networks (BRAN); HIPERACCESS; Conformance testing for the Data Link Control (DLC) layer; Part 2: Test Suite Structure and Test Purposes (TSS e.g. PR for preamb

32、le, PO for postamble, LTS for local tree and STP for general test step. The second substring indicates the purpose of the step. EXAMPLE: PO_release_duc. 6.1.3.4 Default identifier The default identifiers begin with the prefix “DF_“, followed by a string in lowercase letters. 6.1.3.5 Label identifier

33、 The identifiers in the label column is built according to table 3: Table 3: Naming convention for verdict assignment identifier Identifier: = type of table TB Test Body CS Check State test step DF DeFault PO POstamble PR PReamblTS TestStep = sequential number (00 to 99) Label number ETSI ETSI TS 10

34、2 149-3 V1.3.1 (2006-06) 146.1.3.6 ATS abbreviations These abbreviations are used to shorten identifier names: addr address ack acknowledgement bear bearer cap capability cfm confirmchn channel con connection ctrl control est establish ext extensionid identification ind indicationinfo information ma

35、x maximum min minimum par parameter prop proprietary rel release req request rsp responsestd standard sys system6.2 Implementation conventions 6.2.1 Declaration part The comment line of single element TTCN tables (e.g. test suite constants) is used to give a reference where the format and content of

36、 the element is described in the relevant protocol standards. Any particularity of the element format or content is described in the comment line. The comment line in the header of multi element TTCN tables (e.g. ASP) is used to reference to the protocol standard. The detailed comments are used to d

37、escribe any particularity of the table. In the ASP and PDU declarations the comment column is further used to give information about the parameter/field value, in particular if the parameter/field contains a fixed spare value. 6.2.2 Constraint part The ASPs and PDUs are defined in a way that all rel

38、evant parameters/fields are parameterized. That improves the transparency of the constraints in the dynamic part, as all values, which are relevant for the test, are always present. Generally no modified constraints are used. This allows an easier reuse and adaptation of constraints if they are reus

39、ed in other test specifications. The Comment line of a constraint always contains a reference to the relevant protocol standard. The detailed comment footer is used to describe any particularity of the table. 6.2.3 Dynamic part All events, which are defined as a conformance requirement by the TP, ca

40、use a preliminary verdict PASS if the requirement is met. All invalid events are handled in the default tree. Only FAIL or INCONC verdicts are assigned in the default tree. ETSI ETSI TS 102 149-3 V1.3.1 (2006-06) 15The preamble, the test body and the postamble have different defaults, which allow a

41、specific verdict handling, e.g. only INCONC verdicts are assigned in the preamble. All verdict assignments are labelled. According to ISO 9646-3 5, annex E, clause E.2, labels should be written to the conformance log. This allows, for example, to identify were the test failed. To allow an exact iden

42、tification of the table, in which the verdict was assigned, the convention described in clause 6.1.3.5 is applied. TP, which are listed in the untestable TP list in clause 5, are not considered in the ATS, thus these TC identifiers are missing in the ATS and the numbering of the TC is not always con

43、tinuous. 7 Abstract testing service primitives Void. ETSI ETSI TS 102 149-3 V1.3.1 (2006-06) 16Annex A (normative): Abstract Test Suite (ATS) This ATS has been produced using the Tree and Tabular Combined Notation (TTCN) according to ISO/IEC 9646-3 5. The ATS was developed on a separate TTCN softwar

44、e tool and therefore the TTCN tables are not completely referenced in the table of contents. The ATS itself contains a test suite overview part, which provides additional information and references. A.1 The TTCN Graphical form (TTCN.GR) The TTCN.GR representations of the ATS is contained in Adobe Po

45、rtable Document Format files hipA_v011.PDF and is contained in the compressed archive file named ts_10214903v010301p0.ZIP, which accompanies the present document and where 010301 represents the version of the present document. The PDF file contains also the TTCN.GR representations for all other part

46、s of the Hiperaccess Specifications testing. A.2 The TTCN Machine Processable form (TTCN.MP) The TTCN.MP representations corresponding to the ATS is contained in ASCII file hipA_v011.MP and is contained in the compressed archive file named ts_10214903v010301p0.ZIP, which accompanies the present docu

47、ment and where 010301 represents the version of the present document. The MP file contains also the TTCN.MP representations for all other parts of the Hiperaccess Specifications testing. A.3 The ASN.1 specification of the Hiperaccess protocol The HAprotocolPrimitives.asn contains the ASN.1 specifica

48、tion of Hiperaccess protocol messages and their parameters and is contained in the compressed archive file named ts_10214903v010301p0.ZIP, which accompanies the present document and where 010301 represents the version of the present document. ETSI ETSI TS 102 149-3 V1.3.1 (2006-06) 17Annex B (normat

49、ive): Partial PIXIT proforma for HA DLC AT Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PIXIT proforma in this annex so that it can be used for its intended purposes and may further publish the completed PIXIT. The PIXIT proforma is based on ISO/IEC 9646-6. Any needed additional information can be found in the ISO/IEC 9646-6. B.1 Identification summary Table B.1 PIXIT Number: Test Laboratory Name: Date of Issue: Issued