ETSI TR 136 931-2018 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Radio Frequency (RF) requirements for LTE Pico Node B (V15 0 0 3GPP TR 36 931 version 15 0 0 Release 15.pdf

《ETSI TR 136 931-2018 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Radio Frequency (RF) requirements for LTE Pico Node B (V15 0 0 3GPP TR 36 931 version 15 0 0 Release 15.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 136 931-2018 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) Radio Frequency (RF) requirements for LTE Pico Node B (V15 0 0 3GPP TR 36 931 version 15 0 0 Release 15.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 136 931 V15.0.0 (2018-07) LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Frequency (RF) requirements for LTE Pico Node B (3GPP TR 36.931 version 15.0.0 Release 15) TECHNICAL REPORT ETSI ETSI TR 136 931 V15.0.0 (2018-07)13GPP TR 36.931 version 15.0.0 Release 15Reference RTR/

2、TSGR-0436931vf00 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present docum

3、ent can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In cas

4、e of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the docume

5、nt may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/por

6、tal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modif

7、ied without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademark

8、s of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TR 136 931 V15.0.0 (2018-07)23GPP TR 36.931 version 15.0.0 R

9、elease 15Intellectual Property Rights Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 00

10、0 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investi

11、gation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document

12、may include trademarks and/or tradenames which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in t

13、he present document does not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Report (TR) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications

14、or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs t

15、erminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables

16、 except when used in direct citation. ETSI ETSI TR 136 931 V15.0.0 (2018-07)33GPP TR 36.931 version 15.0.0 Release 15Contents Intellectual Property Rights 2g3Foreword . 2g3Modal verbs terminology 2g3Foreword . 5g31 Scope 6g32 References 6g33 Definitions, symbols and abbreviations . 6g33.1 Definition

17、s 6g33.2 Symbols 6g33.3 Abbreviations . 7g34 General . 7g34.1 Work item objective . 7g35 System scenarios 7g35.1 Pico NodeB class 7g35.2 Radio scenario 7g35.3 Simulation assumptions 7g35.3.1 Deployment modelling . 7g35.3.1.1 Pico deployment 7g35.3.1.2 Macro-Pico deployment 8g35.3.2 Channel models 8g

18、35.3.2.1 Antenna patterns . 8g35.3.2.2 Propagation model 9g35.3.2.2.1 Indoor path loss model 9g35.3.2.2.2 Macro cell propagation model . 9g35.3.3 Macro cell parameters . 10g35.3.4 Pico cell parameters 10g35.3.5 Scheduler 11g35.3.6 Power control modelling . 11g36 Changes for the Release 9 in addition

19、 to Release 8 11g36.1 Changes in 36.104 11g36.1.1 Changes to transmitter characteristics. 11g36.1.1.1 Frequency error . 11g36.1.1.2 Base station maximum output power 11g36.1.1.3 Adjacent Channel Leakage power Ratio (ACLR) . 12g36.1.1.3.1 Relative value 12g36.1.1.3.2 Absolute value. 12g36.1.1.4 Opera

20、ting band unwanted emissions . 13g36.1.1.5 Transmitter spurious 13g36.1.1.5.1 Mandatory requirement . 13g36.1.1.5.2 Protection of the BS receiver of own or different BS 13g36.1.1.5.3 Additional spurious emissions requirements . 14g36.1.1.5.4 Co-location with other base stations 14g36.1.2 Changes to

21、receiver characteristics . 17g36.1.2.1 Receiver reference sensitivity . 17g36.1.2.1.1 Discussion . 17g36.1.2.1.2 Minimum requirement . 17g36.1.2.2 Blocking characteristics 17g36.1.2.2.1 General blocking requirement . 17g36.1.2.2.1.1 Minimum requirement . 19g36.1.2.2.2 Collocation with other base sta

22、tions 20g36.1.2.2.2.1 Minimum requirement . 20g36.1.2.3 Dynamic range 22g36.1.2.3.1 Analysis. 22g3ETSI ETSI TR 136 931 V15.0.0 (2018-07)43GPP TR 36.931 version 15.0.0 Release 156.1.2.3.2 Minimum requirement . 23g36.1.2.4 In-channel selectivity 23g36.1.2.4.1 Analysis . 23g36.1.2.4.2 Minimum requireme

23、nt . 24g36.1.2.5 Adjacent Channel Selectivity (ACS) and narrow-band blocking 24g36.1.2.5.1 Analysis . 24g36.1.2.5.2 Minimum requirement . 24g36.1.2.6 Receiver Intermodulation 25g36.1.2.6.1 Analysis . 25g36.1.2.6.2 Minimum requirement . 26g36.1.3 Clarification on performance requirements 27g36.2 Chan

24、ges in 36.141 27g37 Impacts to other WGs . 27g3Annex A: Change history 28g3History 29g3ETSI ETSI TR 136 931 V15.0.0 (2018-07)53GPP TR 36.931 version 15.0.0 Release 15Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present d

25、ocument are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z whe

26、re: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is

27、incremented when editorial only changes have been incorporated in the document. ETSI ETSI TR 136 931 V15.0.0 (2018-07)63GPP TR 36.931 version 15.0.0 Release 151 Scope This document is a Technical Report on Release 9 work item “RF requirements for LTE Pico NodeB“. 2 References The following documents

28、 contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequent revisions do not apply. - For a

29、 non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 21.905: “Vocabulary for 3GPP Specifi

30、cations“. 2 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) radio transmission and reception“. 3 3GPP TS 36.141: “Evolved Universal Terrestrial Radio Access (E-UTRA); Base Station (BS) conformance testing“. 4 3GPP TR 25.951: “FDD Base Station (BS) classificati

31、on“. 5 3GPP TR 36.942: “Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Frequency (RF) system scenarios“. 6 3GPP TS 36.101: “Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) radio transmission and reception“. 7 ITU-R Reccommendation P.1238: “Propagation data and pr

32、ediction methods for the planning of indoor radiocommunication systems and radio local area networks in the frequency range 900 MHz to 100 GHz“. 8 ITU-R Recommendation SM.329: “Unwanted emissions in the spurious domain“.g33 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of t

33、he present document, the terms and definitions given in 3GPP TR 21.905 1 and the following apply. A term defined in the present document takes precedence over the definition of the same term, if any, in 3GPP TR 21.905 1. (Void) 3.2 Symbols For the purposes of the present document, the following symb

34、ols apply: (void) ETSI ETSI TR 136 931 V15.0.0 (2018-07)73GPP TR 36.931 version 15.0.0 Release 153.3 Abbreviations For the purposes of the present document, the abbreviations given in 3GPP TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the

35、definition of the same abbreviation, if any, in 3GPP TR 21.905 1. (void) 4 General 4.1 Work item objective The objective is to define LTE Pico BS and then specify the corresponding RF requirements according to the followings: - definition of LTE Pico BS class - the RF requirements for LTE Pico BS cl

36、ass - introduction of BS transmission and reception requirements, but no baseband performance requirements - update of conformance test specifications 5 System scenarios This clause describes the system scenarios for LTE operation that are considered when defining LTE Pico BS class. It also includes

37、 typical radio parameters that are used to derive requirements. 5.1 Pico NodeB class Pico Base Stations are characterised by requirements derived from Pico Cell scenarios with a BS to UE minimum coupling loss (MCL) equal to 45 dB. Note: This value was derived from 2GHz Band. Editors Note: The impact

38、 on the MCL values due to different frequency bands is for FFS. 5.2 Radio scenario Pico radio scenarios have these characteristics: relatively large coverage, dense user population, easy and flexible installation, and large capacity data service. Pico BS is typically used in indoor offices, indoor h

39、otspots, outdoor hotspots, or dense blocks, and is located on walls, ceilings, or masts. 5.3 Simulation assumptions 5.3.1 Deployment modelling 5.3.1.1 Pico deployment This modelling is referenced to the Pico scenario described in 3GPP TR 25.951 4. A model indoor environment is specified below and co

40、nsists of a large office building with an open floor plan layout. Figure1 shows a diagram of the environment. The parameters of the Pico environment are the following: - building size = 100 x 100 metres - room size = 23 x 20 metres - corridor width = 4 metres ETSI ETSI TR 136 931 V15.0.0 (2018-07)83

41、GPP TR 36.931 version 15.0.0 Release 15Figure 5.3.1.1-1 Pico deployment 5.3.1.2 Macro-Pico deployment The hexagonal cells represent the macro cells and the indoor systems have been mapped onto the macro cells. The indoor layout has been adopted from clause 5.3.1.1. A certain number of indoor systems

42、 are dropped within the macro coverage area with a random uniform distribution. Figure 5.3.1.2-1. Macro-Pico deployment 5.3.2 Channel models 5.3.2.1 Antenna patterns The macro BS antenna radiation pattern to be used for each sector in 3-sector cell sites is plotted in Figure 3. The pattern is identi

43、cal to those defined in 3GPP TR 36.942 5. ()23min 12 , where 180 180mdBAA= , ETSI ETSI TR 136 931 V15.0.0 (2018-07)93GPP TR 36.931 version 15.0.0 Release 15dB3 is the 3dB beam width which corresponds to 65 degrees, and dBAm20= is the maximum attenuation Figure 5.3.2.1-1 Antenna Pattern for 3-Sector

44、Cells For initial coexistence simulations, the azimuth antenna patterns for Pico BS are assumed to be omnidirectional. 5.3.2.2 Propagation model 5.3.2.2.1 Indoor path loss model According to Keenan-Motley and ITU-R P.1238 7 indoor models, the indoor propagation model expressed in dB is in the follow

45、ing form, which gives the similar results with the indoor model in 3GPP TR 25.951 4 when a carrier frequency of 2000MHz is used. 0( ) 20 log( ) 20 log( ) 28niiPLdB f R dB P= + +Where: - Rg20972 transmitter-receiver separation given in metres - fg20972 the carrier frequency given in MHz - ng20972 num

46、ber of penetrated walls - Pig20972 loss of wall number i To be convenient for simulation, according to the parameters given for office environment in ITU-R P.1238 7, the indoor path loss model is represented by the following formula when considering a carrier frequency of 2000 MHz. ( ) 38 30 log( )P

47、LdB R=+ where: R = transmitter-receiver separation given in metres Slow fading deviation in Pico environment is assumed to be 6 dB. 5.3.2.2.2 Macro cell propagation model Macro cell propagation model for urban area is applicable for scenarios in urban and suburban areas outside the high rise core wh

48、ere buildings are of nearly uniform height (3GPP TR 36.942 5). Assuming that the base station antenna -25-20-15-10-50-180 -150 -120 -90 -60 -30 0 30 60 90 120 150 180Gain-dBHorizontal Angle - DegreesETSI ETSI TR 136 931 V15.0.0 (2018-07)103GPP TR 36.931 version 15.0.0 Release 15height is fixed at 15

49、 m above the rooftop, and a carrier frequency of 2 GHz is used, the path loss L can be expressed as below: 10L 128.1 37.6log (R)=+ Where: R is the transmitter-receiver separation in kilometers Slow fading deviation in Macro environment is assumed to be 10 dB. 5.3.3 Macro cell parameters The macro cell parameters are proposed as follows: Table 5.3.3-1: Macro system assumptions Parameters Assumptions Carrier frequency 2000 MHz System bandwidth 10 MHz(aggressor), 10 MHz(victim) Cellular layout Hexagonal grid,