ETSI TR 105 174-6-2015 Integrated broadband cable telecommunication networks (CABLE) Broadband Deployment and Energy Management Part 6 Cable Access Networks (V1 1 1)《综合宽带电缆电信网 (CAB.pdf

《ETSI TR 105 174-6-2015 Integrated broadband cable telecommunication networks (CABLE) Broadband Deployment and Energy Management Part 6 Cable Access Networks (V1 1 1)《综合宽带电缆电信网 (CAB.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 105 174-6-2015 Integrated broadband cable telecommunication networks (CABLE) Broadband Deployment and Energy Management Part 6 Cable Access Networks (V1 1 1)《综合宽带电缆电信网 (CAB.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 105 174-6 V1.1.1 (2015-03) Integrated broadband cable telecommunication networks (CABLE); Broadband Deployment and Energy Management; Part 6: Cable Access Networks TECHNICAL REPORT ETSI ETSI TR 105 174-6 V1.1.1 (2015-03)2 Reference DTR/CABLE-00006 Keywords broadband, energy efficiency ETSI

2、650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/w

3、ww.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived diff

4、erence in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or ch

5、ange of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx

6、 Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI

7、. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks

8、 of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TR 105 174-6 V1.1.1 (2015-03)3 Contents Intellectual Property Rights 5g3Foreword . 5g3Modal verbs terminology 5g3Int

9、roduction 5g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 9g33.3 Abbreviations . 10g34 Cable Access Network Infrastructure . 11g34.1 Classical network, generic reference model . 11g

10、34.2 Fibre deep access network 12g34.3 Network convergence with CCAP . 13g34.4 Network evolution 14g35 Measurement KPIs . 16g35.1 Defining Energy Performance 16g35.2 Energy Performance Global KPI 16g35.2.1 Definition 16g35.2.2 Impact of Plant Density on Energy Performance Global KPI. 17g35.3 Compara

11、ble Work in Area of Energy Intensity of Data Transmission . 17g35.4 Equipment KPIs . 18g35.5 Hub and Data Centre Facility Sites 18g36 CAN Equipment Power Consumption Metrics 19g36.1 Usage of Power Consumption Metrics . 19g36.2 CMTS Power Consumption Metrics 19g36.2.1 Metrics to Compare Supplier Equi

12、pment 19g36.2.2 Metrics for Field Implementation . 21g36.3 Edge-QAM Power Metrics . 21g36.4 Head-end Optics - Transmitter Power Metrics . 21g36.5 Head-end Optics - Receivers Power Metrics 21g37 Power Metrics of Field Deployed Access Network Elements . 22g37.1 Existing Energy Metrics for Field Deploy

13、ed Equipment . 22g37.2 OSP Power Supplies Power Metrics 22g37.3 Fibre Node Power Metrics 23g37.4 RF Amplifiers Power Metrics 23g37.5 Passives and Cable . 23g38 Improving Energy Efficiency in the Access Network 24g38.1 Concept of Benchmarking 24g38.2 Plant Benchmarking . 24g38.3 Mechanisms for Improv

14、ing Access Network Energy Efficiency . 25g38.3.1 Power Supply Loading 25g38.3.2 Improving Load with better Power Supply Selection . 27g38.3.3 Power Supply Consolidation. 28g38.3.4 Plant Voltage and Distribution Losses 29g38.3.5 Access Network Equipment Improvement . 29g39 Calculation of data through

15、put . 29g39.1 Parameters Impacting Data Throughput . 29g39.2 Types of channels delivered to customers 30g3ETSI ETSI TR 105 174-6 V1.1.1 (2015-03)4 9.3 Assumed bit rates for delivering those channels 30g39.4 Amount of viewing time a customer is watching the different types of channels 31g3History 32g

16、3ETSI ETSI TR 105 174-6 V1.1.1 (2015-03)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

17、in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy,

18、 no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technic

19、al Report (TR) has been produced by ETSI Technical Committee Integrated broadband cable telecommunication networks (CABLE). The present document is part 6 of a multi-part deliverable. Full details of the entire series can be found in part 1 i.1. Modal verbs terminology In the present document “shall

20、“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used i

21、n direct citation. Introduction The increasing interaction between the different elements of the Information Communication Technology (ICT) sector (hardware, middleware, software and services) supports the concept of convergence in which: multi-service packages can be delivered over a common infrast

22、ructure; a variety of infrastructures is able to deliver these packages; a single multi-service-package may be delivered over different infrastructures. As a result of this convergence, the development of new services, applications and content has resulted in an increased demand for bandwidth, relia

23、bility, quality and performance, with a consequent increase in the demand for energy which has implications for cost and, in some cases, availability. It is therefore important to maximize the energy efficiency of all the network elements necessary to deliver the required services. New technologies

24、and infrastructure strategies are expected to enable operators to decrease the energy consumption, for a given level of service, of their existing and future infrastructures thus decreasing their costs. This requires a common understanding among market participants that only standards can produce. T

25、he present document analyses the work on fixed broadband cable access networks whilst details of each of the other parts of the document set can be found in Part 1 i.1. It offers a contribution to the required standardization process by establishing an initial basis for determining the main energy c

26、onsuming elements of the operators broadband cable access network and defining indicators to measure their energy consumption and performance in terms of the work done by the network to transfer a volume of data. ETSI ETSI TR 105 174-6 V1.1.1 (2015-03)6 Clearly the energy efficiencies of Operator Si

27、tes, Data Centres, the Core Networks and Customer Network Infrastructures are also important in maximizing the end-to-end energy efficiency of broadband communications and these issues will be covered in other parts of the document set. However, Access Networks differ from the other network componen

28、ts in that they are likely to include a very large number of locations each consuming a relatively low amount of energy. Not only do such small installations tend to be inefficient in their power utilization but when multiplied by their number, their total energy usage becomes considerable. Thus any

29、 energy saving which can be achieved becomes significant when the number of sites is taken into account. The present document provides a basis for defining network key performance indicators as a bench mark that may assist network developers to measure energy metrics with progressive state of art.,

30、designs with the aim to reduce the overall energy consumption of the network. When complete, the documents will contain information to present principle metrics and approaches to calculate the broadband cable access network infrastructure energy performance. Innovative cable access architectures des

31、cribe how these progress the broadband cable access network towards energy efficient infrastructures whilst continuing to meet year by year ever increasing demand for consumer multimedia services, voice, video and data. Cable Operators across Europe and North America are defining metrics to measure

32、the energy performance of their access network. In North America, the U.S. based SCTE i.19 is in the process of defining the CAN in terms of energy consumption and metrics. Through the cooperation agreement between ETSI TC CABLE and SCTE EMS-004 group i.19, development of energy efficiency infrastru

33、ctures for the broadband cable access network are expected to be defined along with metrics to support improvement measures in the energy consumption. Collaboration between the two organizations would ensure consistency and alignment as well as encourage sharing of information to optimize resources

34、for standardization. NOTE: DOCSIS is a registered Trade Mark of Cable Television Laboratories, Inc., and is used in the present document with permission. ETSI ETSI TR 105 174-6 V1.1.1 (2015-03)7 1 Scope The present document describes the cable access network, and progressive network access architect

35、ures that reduce the network energy consumption and the metrics required to benchmark the network and its components to support and enable the proper implementation of services, applications and content on an energy efficient infrastructure and describe measures that may improve the energy efficienc

36、y of cable access networks. Within the present document: clause 4 presents the schematic for cable access network infrastructures, the evolution of the network architectures to meet consumer capacity demand and bandwidth growth and the main components of the cable access network energy consuming ele

37、ments; clause 5 presents measurement key performance indicators to baseline and measure network energy performance; clause 6 explains power consumption metrics of the CAN; clause 7 describes and gives consideration to power metrics of field deployed access network elements; clause 8 describes the el

38、ectrical powering of the CAN components and the distributed usage of the electrical power. This clause explains ways to improve the power consumption and benchmarking the HFC CAN plant; clause 9 considers the calculations to measure the data throughput of a CAN. 2 References 2.1 Normative references

39、 References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenc

40、ed documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced doc

41、uments are necessary for the application of the present document. Not applicable. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-sp

42、ecific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the a

43、pplication of the present document but they assist the user with regard to a particular subject area. i.1 ETSI TR 105 174-1-1: “Access and Terminals (AT); Relationship between installations, cabling and communications systems; Standardization work published and in development; Part 1: Overview, comm

44、on and generic aspects; Sub-part 1: Generalities, common view of the set of documents“. i.2 ETSI TR 102 881 (V1.1.1): “Access, Terminals, Transmission and Multiplexing (ATTM); Cable Network Handbook“. ETSI ETSI TR 105 174-6 V1.1.1 (2015-03)8 i.3 ETSI EN 302 878-2: “Access, Terminals, Transmission an

45、d Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems; Part 2: Physical Layer; DOCSIS 3.0“. i.4 ETSI TR 101 546: “Access, Terminals, Transmission and Multiplexing (ATTM); Integrated broadband Cable and Television Networks; Converged

46、Cable Access Platform Architecture“. i.5 ETSI EN 302 878 (all parts): “Access, Terminals, Transmission and Multiplexing (ATTM); Third Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems“. i.6 ETSI EN 300 429 (V1.2.1): “Digital Video Broadcasting (DVB); Framing

47、 structure, channel coding and modulation for cable systems“. i.7 ETSI TS 103 311 (all parts) (V1.1.1): “Integrated broadband cable telecommunication networks (CABLE); Fourth Generation Transmission Systems for Interactive Cable Television Services - IP Cable Modems“. i.8 EC Mandate M/462 (May 2010)

48、: “Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of Information and Communication Technologies to enable efficient energy use in fixed and mobile information and communication networks. European Commission, DG Enterprise and Industry“. i.9 Coroama, Vlad C., Lorenz M. Hilty,

49、 Ernst Heiri, and Frank M. Horn. 2013. “The Direct Energy Demand of Internet Data Flows.“ Journal of Industrial Ecology, n/a-n/a. doi:10.1111/jiec.12048. i.10 Chan, Chien A., Andr F. Gygax, Elaine Wong, Christopher A. Leckie, Ampalavanapillai Nirmalathas, and Daniel C. Kilper. 2013: “Methodologies for Assessing the Use-Phase Power Consumption and Greenhouse Gas Emissions of Telecommunications Network Services.“ Environmental Science Energy management; Global KPIs; Operational infrastructures; Part 2: specific requirements; Sub-