ETSI TR 103 467-2018 Speech and multimedia Transmission Quality (STQ) Quality of Service aspects for IoT Discussion of QoS aspects of services related to the IoT ecosystem (V1 1 1).pdf

《ETSI TR 103 467-2018 Speech and multimedia Transmission Quality (STQ) Quality of Service aspects for IoT Discussion of QoS aspects of services related to the IoT ecosystem (V1 1 1).pdf》由会员分享，可在线阅读，更多相关《ETSI TR 103 467-2018 Speech and multimedia Transmission Quality (STQ) Quality of Service aspects for IoT Discussion of QoS aspects of services related to the IoT ecosystem (V1 1 1).pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI TR 103 467 V1.1.1 (2018-06) Speech and multimedia Transmission Quality (STQ); Quality of Service aspects for IoT; Discussion of QoS aspects of services related to the IoT ecosystem TECHNICAL REPORT ETSI ETSI TR 103 467 V1.1.1 (2018-06) 2 Reference DTR/STQ-00213m Keywords 3G, data, GSM, IoT, M2

2、M, network, QoS, service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document c

3、an be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of

4、any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document ma

5、y be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.e

6、tsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified w

7、ithout the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are trademarks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare trademarks of

8、ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSMand the GSM logo are trademarks registered and owned by the GSM Association. ETSI ETSI TR 103 467 V1.1.1 (2018-06) 3 Contents Intellectual Property Righ

9、ts 4g3Foreword . 4g3Modal verbs terminology 4g3Introduction 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Abbreviations . 5g34 Taxonomy of IoT use cases 5g35 Classification of selected IoT application examples 6g35.1 Introduction 6g35.2 Voice-controlled

10、interfaces to shopping platforms . 6g35.3 Metering . 7g35.4 Predictive maintenance/telemetry 7g35.5 Bicycle locator 7g35.6 Bio sensors (e-health) . 8g36 IoT with local concentrator nodes 8g37 Methodology 8g38 Conclusion 8g3History 9g3ETSI ETSI TR 103 467 V1.1.1 (2018-06) 4 Intellectual Property Righ

11、ts Essential patents IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Right

12、s (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has

13、 been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or trade

14、names which are asserted and/or registered by their owners. ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not consti

15、tute an endorsement by ETSI of products, services or organizations associated with those trademarks. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Speech and multimedia Transmission Quality (STQ). The Internet of Things (IoT) is a term which describes a sphere whe

16、re a wide variety of physical devices connect and exchange data with other devices or with central entities using packet switched data transfer over mobile or fixed networks. The present document deals with the resulting ecosphere from a Quality of Service. i.e. end user, service-oriented point of v

17、iew. The central question is about the necessity of new or additional QoS metrics beyond the portfolio which has been already defined for IP protocol based packet switched networks. The present document provides a taxonomy for IoT applications and creates a relation between standard QoS metrics and

18、their application to the IoT world. Modal verbs terminology In the present document “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ an

19、d “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The conventional definition of QoS assumes usage, and respective perception of quality aspects, from a human perspective as these are the end users of network services. In an IoT context, these end us

20、ers are machines. However, the main metrics which define the quality a communication network delivers, are basically the same. For instance, an IoT device may also need a certain data rate or a given maximum transfer delay to fulfil its purpose optimally. However, IoT devices have some specific prop

21、erties which derive from their functional purpose. It cannot be taken as granted that the current standardized QoS parameter inventory covers all angles of quality which are relevant for IoT. The present document provides a systematic approach to describe QoS requirements of IoT devices, and answers

22、 the question if additional QoS parameters are needed to capture the specific properties of mobile networks dedicated to the IoT. ETSI ETSI TR 103 467 V1.1.1 (2018-06) 5 1 Scope The present document discusses Quality of Service (QoS) aspects of services related to the Internet of Things (IoT) ecosys

23、tem from an end-to-end perspective; a strict end-user, service-oriented point of view. Here, end-to-end is understood as “from a service user/terminal/provider to a service user/terminal/provider“. The discussion deals with two questions. The first question is if the existing framework for QoS param

24、eter definitions and methodologies is sufficient to also include the IoT angle of view. The second question is if the existing portfolio of QoS parameters needs extensions or adaptations. 2 References 2.1 Normative references Normative references are not applicable in the present document. 2.2 Infor

25、mative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments)

26、 applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular su

27、bject area. Not applicable. 3 Abbreviations For the purposes of the present document, the following abbreviations apply: IoT Internet of Things QoE Quality of Experience QoS Quality of Service 4 Taxonomy of IoT use cases IoT subsumes - linked implicitly or explicitly to respective devices - a large

28、and quite diverse number of applications. It is useful to apply a taxonomy, i.e. a classification scheme, as a step on a systematic approach to answer the question if additional QoS parameters are needed for IoT. In this context, it is also important to keep in mind that while the actor in an IoT us

29、e case may not be a human, the underlying use case or functional target is still driven by human needs. The thing which is the primary actor may therefore be just an agent or representative of a human interest. Therefore, the term QoE coined for directly human-related cases, where the E stands for d

30、irect subjective assessment of the experience made with a given level of QoS, transforms into a metric describing the degree of fulfilment of the underlying need. ETSI ETSI TR 103 467 V1.1.1 (2018-06) 6 The proposed axes of a taxonomy are: Degree of real-timeliness: Which response times (as an order

31、 of magnitude) are typically required to fulfil the target? Degree of interactivity: Actually this can be a sub-category of real-timeliness. Range would be from completely one-way to fully transactional/dialogue based. Data rate requirements. Data volume: What is the typical amount of data to be tra

32、nsferred in the course of a typical transaction? Mobility: Is this application requiring mobility functions of the underlying network? Power supply: Is this application critical with respect to power supply, e.g. needs to run on limited supply, such as a battery that needs to last a certain amount o

33、f time without replacement? Coverage: Is it likely that the device is located in places where network coverage may be critical (e.g. deep in-house or in strongly shielded housings) 5 Classification of selected IoT application examples 5.1 Introduction With the taxonomy outlined in the previous claus

34、e, a number of IoT applications have been selected, and are classified along this taxonomy. 5.2 Voice-controlled interfaces to shopping platforms This is essentially an extension of voice control. A local node triggers a range of actions which range from controlling local functionality (e.g. playing

35、 music), to initiating product purchases. Table 1 Basic type Voice control; transfer of recorded voice to a central server. QoS parameters class Packet data transfer; service availability, data rate, latency. Degree of real-timeliness High. Fast response to voice commands is essential to the functio

36、n of this service. Degree of interactivity Different type: response either by actions (voice control), or dialogue-style when the system asks back. Data rate requirements Low to medium; typically 100 kbit/s (audio). It is of course imaginable that additional information such as camera feeds may be a

37、dded. Data volume Between some seconds of audio in case there is local pre-processing (e.g. activation sequences), or full-time audio transmission while active. Mobility Typically low (services used through devices at home) but may also be used in mobile scenarios (e.g. while driving). Power supply

38、Assumed uncritical (indoor, line voltage supply; perhaps a matter of convenience when used in mobile scenarios). Coverage Medium. ETSI ETSI TR 103 467 V1.1.1 (2018-06) 7 5.3 Metering Table 2 Basic type Transfer of measurement data such as energy consumption, calorimetric information, etc. QoS parame

39、ters class Packet data transfer; service availability, data rate, latency. Degree of real-timeliness Low to medium (in the case data is used to manage energy distribution). Degree of interactivity None or low (in case of control elements such as management of energy consumption). Data rate requireme

40、nts Low, assumed 10 kbit/s. Data volume Small (a few kBytes). Mobility None or low (connected to fixed-location assets). Power supply Critical or uncritical depending on the degree the IoT device is integrated. Coverage Can be critical (deep in-house placement). 5.4 Predictive maintenance/telemetry

41、Table 3 Basic type Transfer of status data of machines/components. QoS parameters class Packet data transfer; service availability, data rate, latency. Degree of real-timeliness Low to medium. Degree of interactivity None or low (in case there is a back channel with some kind of status indication).

42、Data rate requirements Low, assumed 10 kbit/s. Data volume Small ( kBytes). Mobility None to high depending on the type of asset. Power supply Assumed to be uncritical as IoT device is typically part of asset at design time; otherwise may be an issue. Coverage Can be critical (stationary deep in-hou

43、se placement); in mobile applications assumed to be uncritical (asset assumed to be in radio coverage frequently enough). 5.5 Bicycle locator Table 4 Basic type Periodic transfer of location data on a permanent basis or after activation after the vehicle is recognized as missing/stolen. QoS paramete

44、rs class Packet data transfer; service availability, data rate, latency. Degree of real-timeliness Low (frequency 1/hour or less will fulfil the purpose). Degree of interactivity None or low (in case there is a back channel with some kind of status indication). Data rate requirements Low, assumed 10

45、 kbit/s. Data volume Small ( kBytes). Mobility High. Power supply Assumed to be critical, the devices needs to be ready to function over several years. Coverage Medium (if the vehicle is inside buildings there will be no GPS coverage anyway but transmitting last known position can be helpful). ETSI

46、ETSI TR 103 467 V1.1.1 (2018-06) 8 5.6 Bio sensors (e-health) Table 5 Basic type Transfer of sensor data from various sensors (e.g. heart rate, blood pressure, blood oxygen saturation, blood sugar, etc.). QoS parameters class Packet data transfer; service availability, data rate, latency. Degree of

47、real-timeliness Low to medium. Degree of interactivity None (there may be alarming of wearers to critical conditions, but it is assumed that other devices e.g. smartphones will be used in that case). Data rate requirements Low, assumed 10 kbit/s. Data volume Small ( kBytes). Mobility Usually high (s

48、ame as wearer). Power supply High, convenience will require long run time on battery, (expected 0,5 years run time or better before replacement). Coverage Assumed to be uncritical in typical cases (wearer assumed to be in radio coverage frequently enough) but there may be cases where tight monitorin

49、g is important. 6 IoT with local concentrator nodes IoT does not necessarily mean that each device has its own direct connection to respective infrastructure. There are cases where a multitude of local devices exist, for instance in cars or trains. These devices can be connected - via short-range means such as Bluetooth of WiFi, or even through a wired backbone - to a local node which manages the actual connection to remote IoT infrastructure. In that case, local use cases are the same but the requirements for mobile networks are more likely to be similar t