ETSI TR 101 291-1998 Digital Video Broadcasting (DVB) Usage of the DVB Test and Measurement Signalling Channel (PID 0x001 D) Embedded in an MPEG-2 Transport Stream (TS) (V1 1 1)《数字.pdf

《ETSI TR 101 291-1998 Digital Video Broadcasting (DVB) Usage of the DVB Test and Measurement Signalling Channel (PID 0x001 D) Embedded in an MPEG-2 Transport Stream (TS) (V1 1 1)《数字.pdf》由会员分享，可在线阅读，更多相关《ETSI TR 101 291-1998 Digital Video Broadcasting (DVB) Usage of the DVB Test and Measurement Signalling Channel (PID 0x001 D) Embedded in an MPEG-2 Transport Stream (TS) (V1 1 1)《数字.pdf（37页珍藏版）》请在麦多课文档分享上搜索。

1、TR 1 O1 291 1.1.1 (1998-06) Technical RepoR Digital Video Broadcasting (DVB); Usage of the DVB test and measurement signalling channel (PID Ox001 D) embedded in an MPEG-2 Transport Stream (TS) 2 TR 101 291 V1.l.l (1998-06) Reference DTRIJTC-DVB-8 1 (byCO0iCS.P DF) Keywords broadcasting, digital, DVB

2、, TV, video Postal address F-O6921 Sophia Antipolis Cedex - FRANCE Office address 650 Route des Lucioles - Sophia Antipolis Valbonne - FRANCE Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre h Sous-Prfecture de Grasse (06) No 780388 Tel.: +33 4 92 94 42 O0 Fax: 43 4 93

3、65 47 16 Internet secretariat etzii.fr http:/www.etsi.fr http:/www.etsi.org Y Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. Q European Telecommunications Standards Institut

4、e 1998. Ail rights reserved. STD-ETSI TR 101 29L-ENGL 3998 = 3400855 O336237 851 3 TR 1 O1 291 V1.l . 1 (1 998-06) Contents Intellectual Property Rights 4 Foreword 5 1 2 3 3.1 3.2 4 4.1 4.2 5 5.1 5.2 5.3 5.4 5.4.1 5.4.2 5.4.3 5.4.4 5.4.5 5.4.6 5.4.7 5.4.8 5.4.9 5.5 Scope 6 References 6 Definitions a

5、nd abbreviations 7 7 . 7 Introduction 8 Background 8 Summary of technical requirements 8 Syntax of PID Ox001D applications . 9 . 9 f fields in testdata section . 10 Definition of subtables . 11 Descriptors . 11 Descriptor coding . 11 Elementary id descriptor 12 Content information descriptor . Sourc

6、e identifier descriptor . Time reference descriptor . . 13 14 Test signal descriptor . 14 16 GPS-descriptor “reduced PCR“ descriptor 18 program-descriptor 19 Usage of adaptation fields within packets with PID OxlD . 19 Annex A (informative): Detailed description of table content (testdata-byte) . 20

7、 A. 1 Network Status Table (NST) . 20 A.l.l Introduction . 20 A.1.2 Functionality . 20 A.1.3 Syntax of the Network Status Table (NST) . 20 Annex B (informative): B.l B.2 B.3 B.4 B.5 Annex C (informative): History 37 Examples of use for the test packets 27 Example of Testdata structure for a measurem

8、ent table 27 Example of Testdata structure for a Testsignal table . 29 Example of Testdata structure for a Network Status Table (NST) 31 Example of Testdata structure for a Reception Status Table (RST) 31 Example of test data structure for a Remote Control Table (RCT) . 32 Examples for data rates 36

9、 4 TR 101 291 V1.l.l (1998-06) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members , and can be found in SR O00

10、314: “Intellectual Property Rights (IPRs); Essential, orpotentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.fr/ipr or http:/www.etsi.org/ipr). Purs

11、uant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document

12、. STDmETSI TR 101 29L-ENGL 1998 W 3400855 0316239 624 E 5 TR 1 O1 291 V1.l .i (1 998-06) Foreword This Technical Report (TR) has been produced by the Joint Technical Committee (JTC) Broadcast of the European Broadcasting Union (EBU), Comit Europen de Normalisation ELECtrotechnique (CENELEC) and the

13、European Telecommunications Standards Ins titute (ETSI). NOTE The EBU/ETSi JTC Broadcast was established in 1990 to Co-ordinate the drafting of standards in the specific field of broadcasting and related fields. Since 1995 the JTC Broadcast became a tripartite body by including in the Memorandum of

14、Understanding also CENELEC, which is responsible for the standardization of radio and television receivers. The EBU is a professional association of broadcasting organizations whose work includes the Co-ordination of its members activities in the technical legal, programmemaking and programme-exchan

15、ge domains. The EBU has active members in about 60 countries in the European broadcasting area; its headquarters is in Geneva. European Broadcasting Union CH-1218 GRAND SACONNEX (Geneva) Switzerland Tel: Fax: +41 22 717 21 11 +41 22 717 24 81 Digital Video Broadcasting (DVB) Project Founded in Septe

16、mber 1993, the DVB Project is a market-led consortium of public and private sector organizations in the television industry. Its aim is to establish the framework for the introduction of MPEG-2 based digital television services. Now comprising over 200 organizations from more than 25 countries aroun

17、d the world, DVB fosters market-led systems, which meet the real needs, and economic circumstances, of the consumer electronics and the broadcast industry. STDmETSI TR LOL 29L-ENGL 1998 3400855 031ib240 346 6 TR 1 O1 291 V1.l.l (1 998-06) 1 Scope The present document proposes a syntax for the test a

18、nd measurement Packet Identifier PID OxlD. 2 References The following documents contain provisions which, ihrough reference in this text, constitute provisions of the present document References are either specific (identified by date of publication, edition number, version number, etc.) or non-spec

19、ific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, subsequent revisions do apply. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. il ISO/1EC 1381 8-1: “Information technology - Ge

20、neric coding of moving pictures and associated audio information: Systems“. EN 300 468: “Digital Video Broadcasting (DVB); Specification for Service Information (SI) in DVB systems“. ETR 290: “Digital Video Broadcasting (DVB); Measurement guidelines for DVB systems“. EN 300 429: “Digital Video Broad

21、casting (DVB); Framing structure, channel coding and modulation for cable systems“. EN 300 421: “Digital Video Broadcasting (DVB); Framing structure, channel coding and modulation for 11/12 GHz satellite services“. L21 131 141 I51 161 EN 300 744: “Digital Video Broadcasting (DVB); Framing structure,

22、 channel coding and modulation for digital terrestrial television“. ISOhEC 639-2: “Codes for the representation of names of languages - Part 2: Alpha-3 code“. ISO/iEC 8859-1: “Information processing - 8-bit single-byte coded graphic character sets - Part 1: Latin alphabet No. 1“. 71 181 STD-ETSI TR

23、I101 271-ENGL 1998 = 3400855 0316241 282 7 TR 101 291 V1.l.l (1998-06) The syntax of the Testdata contained in PID Ox001D is based on the sructure of the Private section as defined in ISO/EC 13818-1 i. A testdata table may be made of several testdata sections. Different testdata tables (for differen

24、t applications) are specified by their table-id and table-idextension values. One testdata table shall have only one priority level, so only complete tables may be replaced or removed. The values for structure elements “table-id and “descriptor-tag“ may be user defined as specified in lSO/i.EC 13818

25、-1 Li. In the PSI PMT table, the use of a specific descriptor would allow to precise if, for a given elementary stream, support for all currently identified application areas; the provision should be made for user defined solutions to meet the private needs of network operators; simplification of th

26、e test data inserter and test data removal equipment; prioritization of test data to allow end-to-end communication across a network or the re-use of test data capacity within a network as appropriate to the application. The prioritization of test data packets shall allow their transmission within a

27、 network or across network operator borders. - - - - STD-ETSI TR 101 291-ENGL 1998 m 3400855 031b243 055 I Syntax testdata-section() 9 TR 1 O1 291 V1.l.l (1 998-06) No. of bits Mnemonic 5 table-id priority-level Syntax of PID Ox001 D applications 6 uimsbf 2 uimsbf All table-ids and descriptor-tags d

28、efined in the present document are only valid in the context of packets with PID OxlD. section-syntax-indicator 5.1 1 bslbf Testdata section reserved Table 1 defines the structure for testdata sections, transmitted in transport streams with PID Ox001D. 3 bslbf if (section-syntax-indicator = O) ( for

29、 (=O; i Ox0800 ser defined NOTE: The numbers in bracket specify the corresponding TS error as defined in ETR 290 3. 25 TR 101 291 Vl.l.1 (1998-06) Fault-minor if Fault-type Ox01 O0 Description 0x0001 0x0002 IVideo component missing Audio component missing 0x0008 Ox0010 ox0004 PU Teletext subtitles m

30、issing Associated EBU Teletext missing Data component missing ox0011 0x0012 ECM missing EMM missing 0x0020 ox0040 MT missing DVB subtitling missing Other values IDVB reserved I I Fault-major If Fault-type = Ox0004 (EIT error) Table A.5: Fault-major codes for Fault-type = 0x0002 (SDT-error) if Faultt

31、ype =Ox0002 (CDT error) 0x0002 SDT (other TS) error Description Other values IDVB reserved 0x0001 0x0002 0x0003 EIT (actual TS, p/f) error EIT (actual TS, schedule) error EIT (other TS, p/f) error 0x0004 Other values E1T (other TS, schedule) error DVB reserved 26 TR 101 291 Vi .1 .i (1 998-0s) (BER

32、Measurement) 0x0000 Table A.7: Fault-major codes for Fault-type = 0x0104,0x105,0x0106 (BER Measurement) I Fault-major if Fault-type = 0x0104,00105,00106 I Description BER 10E-2 0x0001 0x0002 10E-2 BER 1OE-3 10E-3 BER 1OE-4 0x0003 0x0004 10E-4 BER 1OE-5 10E-5 BER 1OE-6 I 0x0005 10E-6 BER 1OE-7 0x0006

33、 0x0007 0x0008 0x0009 10E-7 BER 1OE-8 10E-8 BER 1OE-9 10E-9 BER 1OE-10 1OE-10 BER 10E-11 Ox000A 10E-11 BER 10E-12 Other values I DVB reserved STD-ETSI TR LO1 291-ENGL 1998 m 3400855 031b2bl O70 W Structure element testdatasection() ( 27 TR 101 291 Vl.l.1 (1998-06) No. of bits Value Annex B (informat

34、ive): table-id Examples of use for the test packets 6 Ox10 This annex contains informative examples of testdata structures. sec tion-s y ntax-indicator B.1 Example of Testdata structure for a measurement 1 0x1 Table B.l gives an informative example of a Testdata structure including video measurement

35、 values. reserved tes tdata-sec tion-length 3 0x7 12 OXOC table-id-extens ion reserved 2 I I priority-levei 8 oxo 1 2 0x3 oxo I current-next-indicator 1 ox 1 last-section-number reserved 8 I I user-defined 8 ox00 4 ox00 I oxo 1 descriptors-length 12 0x025 I 1 versionnumber elementaryjd-descriptor (

36、descriptor-tag descriptor-length 5 8 0x40 8 0x02 ox00 I id-type elementary-stream-pid 1 content-information-descriptor ( 3 oxo 13 Ox0100 (Video PID) I sectionnumber 8 I 1 ox00 STD-ETSI TR 303 291-ENGL 3798 m 3400855 0336262 TO7 m Structure Element descriptor-tag 28 TR 101 291 V1.l.l (1998-06) No. of

37、 bits Value 8 0x42 descriptor-length 8 OxlB iSO-639-language-code I “mesures de qualit vido“ text-char ( 18 24 “fre“ I I I descriptor-tag descriptor-length 8 0x42 8 0x02 source-identifier-id I 16 0x0001 I I testdata-bytes ( reduced-measurement-time-stamp 8 Ox4A l8 sequence-length number-of-measured-

38、frames 0x03 8 Ox02 (NOMF) videogarameterfi) I l8 number-of-videogararneters 32 0x03 (NOVP) CRC-32 for (i=Ok NOMF;i*) for (k=O; k NOVP; k+) ( 32 Meas. Value in Float Format calculated for the whole section I I 1 STD-ETSI TR I101 291-ENGL 1998 3400855 0336263 943 29 TR 101 291 V1.l.l (1998-06) B.2 Exa

39、mple of Testdata structure for a Testsignal table Generation of the PRBS test sequence I I sequence to Figure B.l: PRBS test sequence generator It is recommended to use the PRBS 2 23 -1 with a length of 8 388 607 bits. The input test sequence can be generated by a shift register of length 23 with su

40、itable feedbacks. The generator polynomial shall be I+x *+x. The initialisation word in the PRBS generator is “all ones“. The PRBS data should be inserted in the testdata-bytes. The PRBS generator is reset at the beginning of the first section related to the transmission of the PRBS. Table B.2 gives

41、 an informative example of a Testdata structure including a PRBS test sequence. 30 Table B.2: Example of Testsignal insertion test-signai-descriptor descriptor-tag descriptor-length TR 101 291 V1.l.l (1998-06) 8 0x43 8 0x02 signaitype 1 0x1 (Predefined) intended-u se 2 0x2 (Out of service) signal-id 13 0x0002 (PRBS#l) I I testdata-bytes for (i=O;i2048;i+) PRBS-data 1 CRC-32 8 ox00 32 calculated for the whole section