ETSI ES 202 336-11-2014 Environmental Engineering (EE) Monitoring and control interface for infrastructure equipment (Power Cooling and environment systems used in telecommunicatio_1.pdf

《ETSI ES 202 336-11-2014 Environmental Engineering (EE) Monitoring and control interface for infrastructure equipment (Power Cooling and environment systems used in telecommunicatio_1.pdf》由会员分享，可在线阅读，更多相关《ETSI ES 202 336-11-2014 Environmental Engineering (EE) Monitoring and control interface for infrastructure equipment (Power Cooling and environment systems used in telecommunicatio_1.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI ES 202 336-11 V1.1.1 (2014-09) Environmental Engineering (EE); Monitoring and control interface for infrastructure equipment (Power, Cooling and environment systems used in telecommunication networks); Part 11: Battery system with integrated control and monitoring information model ETSI STANDA

2、RD ETSI ETSI ES 202 336-11 V1.1.1 (2014-09)2Reference DES/EE-02037-11 Keywords battery, control, interface, management, power, system ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association b

3、ut non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present

4、 document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive

5、 within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present do

6、cument, please send your comment to one of the following services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written

7、permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2014. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMa

8、nd the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI ES

9、 202 336-11 V1.1.1 (2014-09)3Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 5g33 Definitions, symbols and abbreviations . 6g33.1 Definitions 6g33.2 Symbols 8g33.3 Abbreviations . 8g

10、34 Integrated Battery Unit (IBU) and Integrated Battery System (IBS) control and monitoring presentation 9g3Annex A (normative): Summary of mandatory monitoring/supervision information and functions 12g3A.1 Integrated Battery Unit (IBU) and Integrated Battery System (IBS) . 13g3Annex B (informative)

11、: Summary of non-mandatory monitoring/supervision information and functions 14g3B.1 Integrated Battery Unit (IBU) and Integrated Battery System (IBS) . 14g3Annex C (normative): Mandatory XML structure and elements 16g3C.1 Structure of an XML document for Telecom/ICT IBS control and monitoring. 16g3C

12、.2 The specific XML elements of a Telecom/ICT IBS 17g3Annex D (informative): Bibliography . 18g3History 19g3ETSI ETSI ES 202 336-11 V1.1.1 (2014-09)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining

13、 to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat.

14、 Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETS

15、I Web server) which are, or may be, or may become, essential to the present document. Foreword This ETSI Standard (ES) has been produced by ETSI Technical Committee Environmental Engineering (EE). The present document is part 11 of a multi-part deliverable covering Monitoring and control interface f

16、or infrastructure equipment (Power, Cooling and environment systems used in telecommunication networks), as identified below: Part 1: “Generic Interface“; Part 2: “DC power system control and monitoring information model“; Part 3: “AC UPS power system control and monitoring information model“; Part

17、4: “AC distribution power system control and monitoring information model“; Part 5: “AC diesel back-up generator system control and monitoring information model“; Part 6: “Air Conditioning System control and monitoring information model“; Part 7: “Other utilities system control and monitoring inform

18、ation model“; Part 8: “Remote Power Feeding System control and monitoring information model“. Part 9: “Alternative Power Systems“; Part 10: “AC inverter power system control and monitoring information model“; Part 11: “Battery system with integrated control and monitoring information model“; Part 12

19、: “Telecom/ICT equipment control and monitoring information model“. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “may not“, “need“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI

20、Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI ES 202 336-11 V1.1.1 (2014-09)51 Scope The present document applies to Battery Systems with integral control and monitoring for te

21、lecommunication and datacom (ICT) equipment. It applies to battery system with a dedicated monitoring and control unit. The present document defines: Monitored and controlled battery system architectures. The minimum set of exchanged information required at the interface, described in “natural langu

22、age“ in text tables. The XML files with tags and variables corresponding to the data in the tables of the annexes. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version

23、applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in

24、this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. 1 ETSI ES 202 336-1: “Environmental Engineering (EE); Monitoring and Control Inter

25、face for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks) Part 1: Generic Interface“. 2 ETSI EN 300 132-3-1: “Environmental Engineering (EE); Power supply interface at the input to telecommunications and datacom (ICT) equipment; Part 3: Op

26、erated by rectified current source, alternating current source or direct current source up to 400 V; Sub-part 1: Direct current source up to 400 V“. 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user wi

27、th regard to a particular subject area. i.1 IEEE 802.1 to 11: “IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture“. i.2 ISO/IEC 10164 (all parts): “Information technology - Open Systems Interconnection“. i.3 ISO/IEC 8879:“Information processing - Text and office system

28、s - Standard Generalized Markup Language (SGML)“. i.4 ETSI EN 300 132-2: “Environmental Engineering (EE); Power supply interface at the input to telecommunications and datacom (ICT) equipment; Part 2: Operated by -48 V direct current (dc)“. ETSI ETSI ES 202 336-11 V1.1.1 (2014-09)63 Definitions, sym

29、bols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: NOTE: Terms referring to energy interface, equipment and distribution are described in power distribution standards EN 300 132-2 i.4 and EN 300 132-3-1 2. alarm: any informatio

30、n signalling abnormal state, i.e. different to specified normal state of hardware, software, environment condition (temperature, humidity, etc.) NOTE: The alarm signal should be understood by itself by an operator and should always have at least one severity qualification or codification (colour, le

31、vel, etc.). EXAMPLE: Rectifier failure, battery low voltage, etc. alarm loop: electrical loop which open or closed state correspond to alarm start (set) or end (clear) state alarm message: text parts of the alarm structure alarm structure: organized set of information fields in an alarm data frame (

32、time stamp, set/clear, text, etc.) battery cell: basic electrochemical element (e.g. a 3.6 Vnominal cell for single lithium ion cell) battery cell string: number of series and parallel interconnected cells to make a standard building block Battery Management System (BMS): electronic components of an

33、 Integrated Battery Unit (IBU) that provides safety protection, detection and balancing, communicating status and alarms, and data acquisition and history for one IBU client post: any device (laptop, PDA, console, etc.) connected to servers via the operation system networks to perform maintenance or

34、 supervision operations Control form Style Sheet (CSS): simple mechanism for adding style (e.g. fonts, colours, spacing) to Web documents EXAMPLE: Tutorials, books, mailing lists for users, etc. Data Gathering Unit (DGU): functional unit used for several functions: collect serial, digital and analog

35、ue data from several equipment; option to send (output) serial or digital commands; forward/receive information to/from the Local/Remote Management Application via agreed protocols; mediation between interfaces and protocols. NOTE: This function may be integrated as part of specific equipment. Dynam

36、ic Host Control Protocol (DHCP): protocol used for self configuration of TCP/IP parameters of a workstation assigning IP address and a subnetwork mask NOTE: DHCP may also configure DNS. Dynamic Name Server (DNS): associates a single domain name to an IP address dynamic synoptic: dynamic display of g

37、eographical maps, networks, installations and equipment ethernet: LAN protocol NOTE: Equivalent to IEEE 802.1 to 11 i.1. ETSI ETSI ES 202 336-11 V1.1.1 (2014-09)7event: any information signalling a change of state which is not an alarm: e.g. battery test, change of state of battery charge NOTE: The

38、event signal should be understood by itself by an operator and should always have at least one severity qualification or codification (colour, level, etc.). It should be transmitted in a formatted structure with text message and other fields like for alarm, e.g. an event can be coded as an alarm wit

39、h severity “0“. eXtensible Mark-up Language (XML): application profile or restricted form of SGML NOTE: By construction, XML documents are conforming SGML the Standard Generalized Markup Language (ISO/IEC 8879 i.3). documents.XML is designed to describe data and focus on what data is. XML should be

40、discerned from the well known Hypertext Transfer Mark-up Language (HTML) which was designed to display data and to focus on how data looks. eXtensible Style sheet Language (XSL): language for expressing style sheets NOTE: It consists of two parts, a language for transforming XML documents, and an XM

41、L vocabulary for specifying formatting semantics. An XSL style sheet specifies the presentation of a class of XML documents by describing how an instance of the class is transformed into an XML document that uses the formatting vocabulary. infrastructure equipment: power, cooling and building enviro

42、nment systems used in telecommunications centres and Access Networks locations EXAMPLE: Cabinets, shelters, underground locations, etc. Integrated Battery System (IBS): energy storage system providing power to the telecom load composed of one or several Integrated Battery Units (IBUs) connected to t

43、he DC bus and managed by an integrated control and monitoring usually called Master Battery Management Module (MBMM) Integrated Battery Unit (IBU): energy storage system providing power to the telecom load comprised of a battery cell string integrated with a Battery Management System (BMS) NOTE: The

44、 standard nominal IBU voltage is typically 24V or 48V comprised of one or more battery cell strings. intranet: internal company network generally using Ethernet protocol and extended IP addresses logbook: chronological file that contains alarm and event messages may be paper or electronic Management

45、 Information Base (MIB): dynamic data base that gathers all objects and should evolve to include automatic and manual configuration tools with self coherence tests Master Battery Management Module (MBMM): electronic unit (optionally used depending on application) that manages and controls several co

46、nnected Integrated Battery Units (IBUs) and provides safety control, communicating status and alarms, and data acquisition and history for the Integrated Battery System (IBS) menu: list of possible input command choices that may be presented in different ways on a display NOTE: Selection is normally

47、 made by a keyboard, a pointing device, a mouse or directly by finger on a sensitive screen. object: class description of items that accept a set of properties or functions NOTE: Generic objects can include more specific items and inherit from their properties. If correctly structured, object progra

48、mming can allow the system to evolve, i.e. be more future-proof. The code should intrinsically be open and structured. Hypertext Preprocessor (PHP): powerful tool for making dynamic and interactive Web pages pop-up: information or command screen that appears when a menu choice is selected NOTE: For

49、example this may be a pop-up menu when the pointer is on a title button. REpresentational State Transfer (REST): way to build an application for distributed system as www ETSI ETSI ES 202 336-11 V1.1.1 (2014-09)8Simple Object Access Protocol (SOAP): way to communicate between applications running on different operating systems, with different technologies and programming languages NOTE 1: SOAP communicates over HTTP, because HTTP is supported by all Internet browsers and servers, SOAP traffic is not blocked by firewalls and proxy servers. NOT