ETSI EN 301 238-2001 Digital Enhanced Cordless Telecommunications (DECT) Data Services Profile (DSP) Isochronous Data Bearer Services with Roaming Mobility (Service Type D Mobility.pdf

《ETSI EN 301 238-2001 Digital Enhanced Cordless Telecommunications (DECT) Data Services Profile (DSP) Isochronous Data Bearer Services with Roaming Mobility (Service Type D Mobility.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 301 238-2001 Digital Enhanced Cordless Telecommunications (DECT) Data Services Profile (DSP) Isochronous Data Bearer Services with Roaming Mobility (Service Type D Mobility.pdf（73页珍藏版）》请在麦多课文档分享上搜索。

1、 ETSI EN 301 238 V1.3.1 (2001-10)European Standard (Telecommunications series) Digital Enhanced Cordless Telecommunications (DECT);Data Services Profile (DSP);Isochronous data bearer services with roaming mobility(service type D, mobility class 2)ETSI ETSI EN 301 238 V1.3.1 (2001-10)2Reference REN/D

2、ECT-A0199 Keywords data, DECT, mobility, profile, radio, roaming ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88

3、 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version

4、is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status.

5、 Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.fr Copyright Notification No part may be reproduced except as authorized by written permission.

6、The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2001. All rights reserved. ETSI ETSI EN 301 238 V1.3.1 (2001-10)3Contents Intellectual Property Rights6 Foreword.6 1 Scope 7 2 References 7 3 Definitions and abbreviations

7、.8 3.1 Definitions8 3.2 Abbreviations .9 4 Description of services .10 4.1 Reference configuration .10 4.2 Service objectives.10 4.2.1 General10 4.2.2 32 kbit/s unprotected service 11 4.2.3 Unprotected rate adaptation service11 5 Physical layer (PHL) requirements 11 6 MAC layer requirements11 6.1 32

8、 kbit/s unprotected service12 6.2 Unprotected rate adaptation service .12 7 DLC layer requirements .17 7.1 C-plane requirements .17 7.2 U-plane requirements .17 7.2.1 32 kbit/s unprotected service 17 7.2.2 Unprotected rate adaptation service18 8 NWK layer requirements18 8.1 General .18 8.2 Requireme

9、nts18 9 Management entity requirements .19 10 Generic interworking conventions and procedures 19 10.1 Bit ordering 19 Annex A (normative): LU9 - Unprotected Rate Adaptation for V.series Equipment (RAVE) service20 A.1 Overview 20 A.1.1 FU9 frame structure21 A.1.1.1 General frame structure 21 A.1.1.1.

10、1 Mode selection 21 A.1.1.1.2 Mode-dependent fields22 A.1.1.1.3 Length Indicator (LI) and FEC22 A.1.1.1.3.1 BCH Coding procedure (normative) .23 A.1.1.1.3.2 BCH Decoding procedure (Informative) .23 A.1.1.1.4 Indication of Break condition24 A.1.1.2 FU9 buffering procedures.25 A.1.1.3 Connection hando

11、ver 25 A.1.1.4 Transmission order .25 A.2 Alignment signal management.25 A.2.1 General .25 A.2.2 Procedures 26 A.3 ITU-T Recommendation V.24 signalling.27 A.3.1 General .27 ETSI ETSI EN 301 238 V1.3.1 (2001-10)4A.3.2 Transmitter procedures.27 A.3.3 Receiver procedures .27 A.4 Rate coding.28 A.4.1 Ge

12、neral .28 A.4.2 Transmitter procedures.29 A.4.3 Receiver procedures .29 A.5 DIC.29 A.5.1 General .29 A.5.2 Measurement of phase differences .29 A.5.3 Compensation control rules30 A.5.3.1 General30 A.5.3.2 Optimizing error resilience .31 A.5.3.2.1 Procedure for conveying state changes .31 A.5.3.2.2 P

13、rocedure for executing positive and negative compensation.31 A.6 Information field 31 A.6.1 General .31 A.6.2 User data rates 32 A.6.2.1 Synchronous mode32 A.6.2.1.1 Information field location and repetition for rates up to 9,6 kbit/s32 A.6.2.2 Asynchronous mode .32 A.6.2.2.1 Information field locat

14、ion and repetition for rates up to 9,6 kbit/s33 A.6.3 Information field filling rule.34 A.7 Primitives .35 Annex B (normative): Specific interworking conventions36 B.1 Interworking to connection-oriented bearer services .36 B.1.1 Scope36 B.1.2 Reference configuration .36 B.1.2.1 PP37 B.1.2.2 FP37 B.

15、1.2.3 General configuration .38 B.1.3 PP C-plane procedures .38 B.1.4 FP C-plane procedures .38 B.1.5 Network modem interworking service using ITU-T Recommendation V.24 connection 39 B.1.5.1 General39 B.1.5.2 Reference configuration39 B.1.5.3 TAF interworking to ITU-T Recommendation V.2439 B.1.5.3.1

16、 General39 B.1.5.3.2 ITU-T Recommendation V.24 Interchange circuit handling rules40 B.1.5.3.3 Call establishment signalling handling40 B.1.5.3.4 Data transmission40 B.1.5.4 DECT FP Interworking procedures 41 B.1.5.4.1 General41 B.1.5.4.2 Call establishment signalling handling41 B.1.5.4.3 ITU-T Recom

17、mendation V.24 Interchange circuit handling rules42 B.1.5.4.4 Modem selection .42 B.1.5.4.5 Data transmission42 B.2 coding .45 Annex C (normative): Service D2; PT Profile Implementation Conformance Statement (ICS) - Physical layer (PHL) .48 Annex D (normative): Service D2; FT Profile Implementation

18、Conformance Statement (ICS) - Physical layer (PHL) .49 Annex E (normative): Service D2; PT Profile Implementation Conformance Statement (ICS) and PT Protocol Implementation Conformance Statement (PICS) proforma - Medium Access Control (MAC) layer .50 ETSI ETSI EN 301 238 V1.3.1 (2001-10)5E.1 Service

19、 D2; PT Profile Implementation Conformance Statement (ICS) - Medium Access Control (MAC) layer .51 E.2 Service D2; PT Protocol Implementation Conformance Statement (PICS) proforma - Medium Access Control (MAC) layer52 Annex F (normative): Service D2; FT Profile Implementation Conformance Statement (

20、ICS) and Protocol Implementation Conformance Statement (PICS) proforma - Medium Access Control (MAC) layer59 F.1 Service D2; FT Profile Implementation Conformance Statement (ICS) - Medium Access Control (MAC) layer .60 F.2 Service D2; FT Protocol Implementation Conformance Statement (PICS) proforma

21、- Medium Access Control (MAC) layer61 Annex G (normative): Service D2; PT Profile Implementation Conformance Statement (ICS) - Data Link Control (DLC) layer .65 G.1 C-plane .65 G.2 U-plane.65 G.2.1 U-plane 32 kbit/s unprotected service 65 G.2.2 U-plane unprotected rate adaptation service 65 Annex H

22、(normative): Service D2; FT Profile Implementation Conformance Statement (ICS) - Data Link Control (DLC) layer .66 H.1 C-plane .66 H.2 U-plane.66 H.2.1 U-plane 32 kbit/s unprotected service 66 H.2.2 U-plane unprotected rate adaptation service 66 Annex I (informative): Void .67 Annex J (normative): S

23、ervice D2; PT profile Requirement List (profile RL) and Protocol Implementation Conformance Statement (PICS) proforma - Network (NWK) layer.68 J.1 Service D2; PT profile Requirement List (profile RL) - Network (NWK) layer .68 J.2 Service D2; PT Protocol Implementation Conformance Statement (PICS) pr

24、oforma - Network (NWK) layer.69 Annex K (normative): Service D2; FT profile Requirement List (profile RL) and Protocol Implementation Conformance Statement (PICS) proforma - Network (NWK) layer.70 K.1 Service D2; FT profile Requirement List (profile RL) - Network (NWK) layer .70 K.2 Service D2; FT P

25、rotocol Implementation Conformance Statement (PICS) proforma - Network (NWK) layer.71 Annex L (informative): Bibliography.72 History 73 ETSI ETSI EN 301 238 V1.3.1 (2001-10)6Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. T

26、he information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available f

27、rom the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.org/legal/home.htm). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ET

28、SI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless Telecommunications (DECT). National transposition date

29、s Date of adoption of this EN: 5 October 2001 Date of latest announcement of this EN (doa): 31 January 2002 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 July 2002 Date of withdrawal of any conflicting National Standard (dow): 31 July 2002 ETSI ETSI EN 301

30、 238 V1.3.1 (2001-10)71 Scope The present document specifies a profile for Digital Enhanced Cordless Telecommunications (DECT) systems conforming to EN 300 175, parts 1 to 7 ( 1 to 7). It is part of a family of profiles aimed at the general connection of terminals supporting non-voice services to a

31、fixed infrastructure, private and public. The type D service, mobility class 2, as described in the ETR 185 9 supports Isochronous Data Bearer Services (IDBSs) with mobility and is suitable for transparent transfer of isochronous data streams. It is intended for use in private and public roaming app

32、lications. Video telephony, video conferencing and secure telephone services (end-to-end encrypted) over external networks can be considered as applications of IDBS. Phase 1 of the present document defines an unprotected service offering an unrestricted digital 32 kbit/s data bearer service, strongl

33、y based on the Generic Access Profile (GAP) (defined in EN 300 444 8), and an unprotected single bearer, multi-rate, rate adaptation service to interwork to synchronous ITU-T Recommendations V.series interfaces. In addition to the above, the current D.2 service supports an asynchronous version of th

34、e unprotected single bearer, multi-rate, rate adaptation service to interwork with asynchronous ITU-T Recommendations V.series interfaces. Further phases of this profile may additionally provide multiple rate, multibearer support and limited error correction capability for services/applications requ

35、iring higher rates and high quality isochronous data transmission. The present document specifies the requirements on the Physical layer (PHL), Medium Access Control (MAC) layer, Data Link Control (DLC) layer and Network (NWK) layer of DECT. The present document also specifies Management Entity (ME)

36、 requirements and generic Interworking Conventions (IC). 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version nu

37、mber) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. 1 ETSI EN 300 175-1: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 1: Overview“. 2 ETSI EN 300 175-2: “Digital Enhanced Co

38、rdless Telecommunications (DECT); Common Interface (CI); Part 2: Physical layer (PHL)“. 3 ETSI EN 300 175-3: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 3: Medium Access Control (MAC) layer“. 4 ETSI EN 300 175-4: “Digital Enhanced Cordless Telecommunications (DE

39、CT); Common Interface (CI); Part 4: Data Link Control (DLC) layer“. 5 ETSI EN 300 175-5: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network (NWK) layer“. 6 ETSI EN 300 175-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 6

40、: Identities and addressing“. 7 ETSI EN 300 175-7: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security features“. 8 ETSI EN 300 444: “Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP)“. ETSI ETSI EN 301 238 V1.3.1 (2001-10)89

41、ETSI ETR 185: “Digital Enhanced Cordless Telecommunications (DECT); Data Services Profile (DSP); Profile overview“. 10 ITU-T Recommendation V.110: “Support by an ISDN of data terminal equipments with V-Series type interfaces“. 11 ITU-T Recommendation V.24 (2000): “List of definitions for interchange

42、 circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE)“. 12 ITU-T Recommendation V.34 (1998): “A modem operating at data signalling rates of up to 33 600 bit/s for use on the general switched telephone network and on leased point-to-point 2-wire telephone-type c

43、ircuits“. 13 ETSI ETS 300 474-1: “Digital Enhanced Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile requirement list and profile specific Implementation Conformance Statement (ICS) proforma; Part 1: Portable radio Termination (PT)“. 14 ETSI ETS 300 474-2: “Digital Enhanced C

44、ordless Telecommunications (DECT); Generic Access Profile (GAP); Profile requirement list and profile specific Implementation Conformance Statement (ICS) proforma; Part 2: Fixed radio Termination (FT)“. 15 ETSI EN 300 476-1: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI)

45、; Protocol Implementation Conformance Statement (PICS) proforma; Part 1: Network (NWK) layer - Portable radio Termination (PT)“. 16 ETSI ETS 300 476-3: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3:

46、Medium Access Control (MAC) layer - Portable radio Termination (PT)“. 17 ETSI ETS 300 476-4: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 4: Network (NWK) layer - Fixed radio Termination (FT)“. 18 ETS

47、I ETS 300 476-6: “Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 6: Medium Access Control (MAC) layer - Fixed radio Termination (FT)“. 19 ITU-T Recommendation R.140: “Definitions of essential technical t

48、erms in the field of telegraph transmission“. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in EN 300 444 8 and the following apply: bearer service: type of telecommunications service that provides the capability for the tra

49、nsmission of signals between user/network interfaces NOTE 1: For DECT systems, the Air (Radio) interface provides the bearer services between the DECT Fixed radio Termination and the DECT Portable radio Termination. isochronous: pertaining to a signal or a time-varying phenomenon characterized by significant instants separated by time intervals having a duration theoretically equal to the duration of a unit interval or to an integral multiple of this duration (ITU-T Recommendation R.140) mobility class 1: closed user groups,