ETSI EN 300 392-11-10-2001 Terrestrial Trunked Radio (TETRA) Voice Plus Data (V+D) Part 11 Supplementary Services Stage 2 Sub-Part 10 Priority Call (PC) (V1 1 1)《陆地集群无线电(TETRA) 语音加_1.pdf

《ETSI EN 300 392-11-10-2001 Terrestrial Trunked Radio (TETRA) Voice Plus Data (V+D) Part 11 Supplementary Services Stage 2 Sub-Part 10 Priority Call (PC) (V1 1 1)《陆地集群无线电(TETRA) 语音加_1.pdf》由会员分享，可在线阅读，更多相关《ETSI EN 300 392-11-10-2001 Terrestrial Trunked Radio (TETRA) Voice Plus Data (V+D) Part 11 Supplementary Services Stage 2 Sub-Part 10 Priority Call (PC) (V1 1 1)《陆地集群无线电(TETRA) 语音加_1.pdf（25页珍藏版）》请在麦多课文档分享上搜索。

1、ETSI EN 300 392-1 1-10 1.1.1 (2001-05) European Standard (Telecommunications series) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 11 : Supplementary services stage 2; Sub-part IO: Priority Call (PC) 2 ETSI EN 300 392-11-10 V1.l.l (2001-05) Th Reference DEN/TETRA-03A-I 1-10 Keywords

2、 radio, tetra ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 O0017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the presen

3、t document can be downloaded from: htt!x/w.ettlsi. orq present document may be made available in more than one electronic version or in print. In any cas of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dis

4、pute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other

5、ETSI documents is available at If you find errors in the present document, send your comment to: ed itoretsi .fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Te

6、lecommunications Standards Institute 2001. All rights reserved. ETSI 3 ETSI EN 300 392-11-10 V1.l.l (2001-05) Contents Intellectual Property Rights 5 Foreword 5 1 2 3 3.1 3.2 4 4.1 4.2 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.3 5 5.1 5.1.1 5.1.1.1 5.1.1.2 5.1.1.3 5.1.1.4 5.1.2 5.1.2.1 5.1.2.2 5.1.2.3 5

7、.1.2.4 5.1.3 5.1.3.1 5.1.3.2 5.1.4 5.1.4.1 5.1.4.2 5.1.5 5.2 5.3 5.4 5.4.1 5.4.1.1 5.4.1.2 5.4.1.3 5.4.2 5.4.3 5.4.4 5.4.5 5.4.5.1 5.4.5.2 5.4.5.3 5.4.5.4 5.4.6 5.4.7 Scope 6 References 6 Definitions and abbreviations 7 Definitions 7 Abbreviations 7 Functional model 8 Functional model description .

8、8 Description of functional entities . 9 SS-PC functional entity in the individual or group home SwMI. FE2 1 10 SS-PC FE in the controlling SwMI. FE21 . 10 SS-PC FE in called user visited SwMI or participating SwMI. FE25 . 10 Authorized users FE. FE3 10 User Bs (called party) FE. FE5 10 Relationship

9、 of functional model to basic call functional model 11 nformation flows . 11 Definition of information flows . 11 Definition 12 DEFINE . 12 DEFINE-ACK 13 ASSIGN . 13 Activatioddeactivation 14 ACTIVATE 14 DEACTIVATE . 15 Interrogation 15 INTERROGATE 15 Operation and invocation . 16 PRIORITY1 . 16 PRI

10、ORITY2 . 16 Information flows between different TETRA systems . 16 Relationship of SS-PC information flows to other information flows 17 Service primitives 17 Information flow sequences . 17 Definition 18 Definition of SS-PC when definition is sent to user A 18 Definition when the authorized user is

11、 in a visited system 19 Definition when user A is in a visited system 19 Interrogation 20 Activation 21 Deactivation . 21 Functional entity actions 21 Functional entity actions of FE1 21 Functional entity actions of FE2 1 21 Functional entity actions of FE3 22 IS1 Functional entity actions of FE25 2

12、2 Operation for call within one TETRA system . 22 Operation for call initiated over Inter-System Interface (ISI) . 23 User As functional entity, FE1 . 9 ASSIGN-ACK 13 ACTIVATE-ACK 14 DEACTIVATE-ACK . 15 INTERROGATE-ACK . 16 ETSI 4 ETSI EN 300 392-11-10 V1.l.l (2001-05) 5.4.8 Functional entity action

13、s 23 5.4.8.1 Functional entity actions of FE1 23 5.4.8.2 Functional entity actions of FE2 1 23 5.4.8.3 Functional entity actions of FE25 23 5.4.8.4 Functional entity actions of FE5 24 6 Allocation of FEs to physical equipment . 24 7 Inter-working considerations . 24 7.1 Management and operation 24 7

14、.2 Migration 24 History . 25 ETSI 5 ETSI EN 300 392-11-10 V1.l.l (2001-05) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members a

15、nd non-members, and can be found in ETSI SR O00 3 14: “Intellectual Property Rights (IPRs); Essential, orpotentially Essential, IPRs notjed to ETSI in respect OfETSIstandards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (htt:/!wvw.etsi ordj r).

16、Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 3 14 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the presen

17、t document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Terrestrial Trunked Radio (TETRA). The present document had been submitted to Public Enquiry as ETS 300 392-1 1-10. During the processing for Vote, it was converted into an EN. The present docum

18、ent is part 11 of a multi-part deliverable covering Voice plus Data (V+D), as identified below: Part 1: “General network design“; Part 2: “Air Interface (AI)“; Part 3: Part 4: “Gateways basic operation“; Part 5: Part 6: Part 7: I Security“; Part 9: “General requirements for supplementary services“;

19、Part 10: “Supplementary services stage 1“; Part 11: “Supplementary services stage 2“; Part 12: “Supplementary services stage 3“; Part 13: “SDL model of the Air Interface (AI)“; Part 14: “Protocol Implementation Conformance Statement (PICS) proforma specification; TS 100 392-15: “TETRA frequency band

20、s, duplex spacings and channel numbering“. “Interworking at the Inter-System Interface (ISI)“; “Peripheral Equipment Interface (PEI)“; “Line connected Stations (LS)“; I National transposition dates I Date of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publicatio

21、n of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): 25 May 2001 3 1 August 200 1 28 February 2002 28 February 2002 ETSI 6 ETSI EN 300 392-11-10 V1.l.l (2001-05) 1 Scope The present document defines the stage 2 specifications of

22、 the Supplementary Service Priority Call (SS-PC) for the Terrestrial Trunked RAdio (TETRA). The SS-PC is defined to enable a user to have preferential access to the network resources in a TETRA system in times of congestion. The SS-PC applies for the basic services: circuit mode calls (speech or dat

23、a). The SS-PC specifies the definition, activation, deactivation and interrogation for the usage of low and high call priorities in the TETRA system. The SS-PC operations are defined for Switching and Management Infiastructure (SwMI), for the Mobile Station (MS) and for the Line Station (LS). SS-PC

24、is defined for subscribers of one TETRA system, but the subscribers may be located in several TETRA systems and the information flows may be delivered over the Inter System Interface (ISI). SS-PC may also be invoked for basic services within one TETRA system or for basic services that extend over IS

25、1 to several TETRA systems. The pre-emptive priorities, Man-Machine Interface (MMI) and charging principles are outside of the scope of the present document. Stage 2 describes the functional capabilities of the supplementary service introduced in stage 1 description. Stage 2 identifies the functiona

26、l capabilities for the management and operation of the service in the SwMI, in the MS and in the LS. Stage 2 describes also the information flows exchanged between these entities and the flows sent over the ISI. NOTE: The stage 2 description is followed by the stage 3 description, which specifies th

27、e encoding rules for the information flows and process behaviour for the different entities in the SwMI, the MS and LS. Aspects relating to all supplementary services are detailed in ETS 300 392-9 2. 2 Re fe re nces The following documents contain provisions which, through reference in this text, co

28、nstitute provisions of the present document. References are either specific (identified by date of publication andor edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. il ETSI EN 30

29、0 392-2 (V2.3.2): “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI)“. ETSI ETS 300 392-9: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 9: General requirements for supplementary services“. ETSI ETS 300 392-3-5: “Terrestrial Trunked Radio (TETRA);

30、 Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 5: Additional Network Feature for Mobility Management (ANF-ISIMM)“. ETSI EN 300 392-12-10: “Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 10: Prior

31、ity Call (PC)“. ISO/IEC 1 1574 (2000): “Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Circuit-mode 64 kbit/s bearer services - Service description, functional capabilities and information flows“. ETSI ETS 300 392-12-16: “

32、Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 16: Pre-emptive Priority Call (PPC)“. Pl 31 41 51 61 ETSI 7 ETSI EN 300 392-11-10 V1.l.l (2001-05) 3 Definitions and abbreviations 3.1 Defi nit ions For the purposes of the present document, t

33、he following terms and definitions apply: authorized user: user who is authorized to define, activate, deactivate and interrogate the SS-PC call controlling SwMI: in an individual call the call originating SwMI and in a group call the home SwMI of the group priority level: pre-agreed value allocated

34、 to each mobile ITSI or GTSI on a per call basis It is used to determine priority access to network resources in the event of network congestion. user A: calling party, the party that invokes or generates invocation of SS-PC user B: called party in a call for which SS-PC is operated 3.2 Ab brevi at

35、ions For the purposes of the present document, the following abbreviations apply: cc CCA NOTE: basic service Call Control functional entity basic service Call Control functional entity Agent CC and CCA are applied as defined in ISO/IEC 11574 5. FE GTSI ISDN IS1 ITSI ss-PC ss-PPC SDL ss SwMI TETRA Fu

36、nctional Entity Group TETRA Subscriber Identity Integrated Services Digital Network Inter-System Interface Individual TETRA Subscriber Identity Supplementary Service Priority Call Supplementary Service Pre-emptive Priority Call Specification and Description Language Supplementary Service Switching a

37、nd Management Infiastructure Terrestrial Trunked Radio ETSI 8 ETSI EN 300 392-11-10 V1.l.l (2001-05) 4 Functional model 4.1 Functional model description The functional model describes the functional characteristics of the Functional Entities (FES) involved in the management and operation of SS-PC. T

38、he functional model shall comprise the following FES: FE1 FE21 NOTE 1: FE3 FE5 NOTE 2: FE25 user As (calling partys) FE; SS-PC FE in home SwMI or controlling SwMI; During definition, activation, deactivation and interrogation request, FE2 1 may either be user As home SwMI or a group home SwMI. Durin

39、g invocation and operation, FE2 1 will be the controlling SwMI of the priority call that has been initiated. authorized users FE; user Bs (called partys) FE; Called party in a call in which SS-PC is operated. SS-PC FE in user Bs SwMI; CC Call Control FE in SwMI. CCA Call Control Agent FE in MS/LS. T

40、he following relationships shall exist between these FES: Figure I ra between FE1 and FE21/FE25; rb between FE21 and FE25; rc between FE21 and FE3; rd between FE21/FE25 and FE5. shows these FES and relationships for the management part and figure 2 for the operational part. home visited system syste

41、m a ut horized user A authorized user SS-PC FE in system 2 user A Figure 1: The relations and the functional entities of the management part of SS-PC ETSI 9 ETSI EN 300 392-11-10 V1.l.l (2001-05) home system ! visited system i rb ! ! ! in system 1 ! ! ! ! ! i i I ! ! ! ! user B user B Figure 2: The

42、relations and functional entities of the operational part of SS-PC 4.2 Description of functional entities 4.2.1 User As functional entity, FEI The functional tasks of FE1 for definition and interrogation shall be the following: - as an option, the MS/LS may support reception of SS-PC definition from

43、 FE21. Upon acceptance, FE1 shall pass the SS-PC definition request, to the user application and acknowledge the SS-PC definition, if FE21 has requested this; as an option, the MS/LS may supports SS-PC interrogation, FE1 shall pass the SS-PC interrogation request to FE2 1, when the user application

44、issues it. Upon reception of the interrogation response from FE2 1, FE 1 shall pass it to the user application. - The functional tasks for operation of FE1 for a priority individual or group call request shall be as follows: - upon reception of the SS-PC invocation from the user application within a

45、 call Set-up, FE1 shall send the SS-PC invocation to the SwMI (FE21) with the call Set-up; upon reception of a SS-PC confirmation from FE21, FE1 shall pass the SS-PC confrmation to the user application; when migrated into a visited system the user application shall use “Priority not defined“ in the

46、call setup until a definition is provided e.g. by default or downloaded. - - NOTE: It is outside of the present document how default values for the home system are allocated. ETSI 10 ETSI EN 300 392-11-10 V1.l.l (2001-05) 4.2.2 SS-PC functional entity in the individual or group home SwMI, FE21 The f

47、unctional tasks of FE2 1 for definition, activation, deactivation and interrogation shall be the following: - as an option, FE21 supports SS-PC definition, FE21 shall veri6 these request when received from FE3 and if found valid, save this information and acknowledge it to FE3; as an option, FE21 su

48、pports SS-PC activation or deactivation, FE21 shall veri6 these request when received from FE3 and if found valid, save this information and acknowledge it to FE3; - - as an option, if FE3 requested downloading of SS-PC definition to FEl(s), FE21 shall then send the corresponding requests to the con

49、cerned FE1 s and may receive their acknowledgements; as an option, at the reception of an SS-PC interrogation request from either FE3 or FE1, FE21 should veri6 the request and send the response to FE3 or FE 1. If FE2 1 does not support interrogation, an error indication shall be sent in response to the requesting entity. - 4.2.3 SS-PC FE in the controlling SwMI, FE21 The functional tasks for operation of FE2 1 for a priority individual or group call shall be as follows: - when FE2 1 receives a call set-up request with the SS-PC invocation, FE2 1 shall v