EN ISO TS 12747-2013 en Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension《石油和天然气工业 管道输送系统 管道寿命延长建议的做法》.pdf

《EN ISO TS 12747-2013 en Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension《石油和天然气工业 管道输送系统 管道寿命延长建议的做法》.pdf》由会员分享，可在线阅读，更多相关《EN ISO TS 12747-2013 en Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension《石油和天然气工业 管道输送系统 管道寿命延长建议的做法》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationPD CEN ISO/TS 12747:2013Petroleum and naturalgas industries Pipelinetransportation systems Recommended practice forpipeline life extension (ISO/TS12747:2011)PD CEN ISO/TS 12747:2013 PUBLISHED DOCUMENTNational forewordThis Published Document is the UK implementation of CEN IS

2、O/TS12747:2013. It is identical to ISO/TS 12747:2011.The UK participation in its preparation was entrusted to TechnicalCommittee PSE/17, Materials and equipment for petroleum,petrochemical and natural gas industries.A list of organizations represented on this committee can beobtained on request to i

3、ts secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 82648 1ICS 75.200Compliance with a British Standard cann

4、ot confer immunity fromlegal obligations.This Published Document was published under the authority of theStandards Policy and Strategy Committee on 31 October 2013.Amendments issued since publicationDate Text affectedTECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS

5、12747 October 2013 ICS 75.200 English Version Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension (ISO/TS 12747:2011) Industries du ptrole et du gaz naturel - Systmes de transport par conduites - Pratique recommande pour lextensio

6、n de la dure de vie des conduites (ISO/TS 12747:2011) Erdl- und Erdgasindustrie - Rohrleitungstransportsysteme - Empfehlungen fr die Verlngerung der Lebensdauer von Rohrleitungen (ISO/TS 12747:2011) This Technical Specification (CEN/TS) was approved by CEN on 24 September 2013 for provisional applic

7、ation. The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard. CEN members are required to announce the existen

8、ce of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into a

9、n EN is reached. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherland

10、s, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights o

11、f exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. CEN ISO/TS 12747:2013: EPD CEN ISO/TS 12747:2013ISO/TS 12747:2011(E) ISO 2011 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Normative references1 3 Terms and definitions .3

12、4 Abbreviated terms.5 5 Life extension overview5 5.1 General .5 5.2 Assessment process.6 5.3 Assessment requirements .6 5.4 Limitations on life extension8 5.5 Pipeline system availability9 6 Data compilation9 6.1 General .9 6.2 Data.9 7 Technical integrity of the pipeline system12 7.1 General .12 7.

13、2 PIMS review12 7.3 Remediation requirements .13 8 Future threat identification.13 8.1 General .13 8.2 Generic threats 13 8.3 Threats specific to offshore pipeline systems .14 8.4 Threats specific to onshore pipeline systems .14 9 Life extension assessment.14 9.1 Risk assessment .14 9.2 Pipeline sys

14、tem design review 16 9.3 Assessment of remnant life .17 9.4 Integrity management during extended life20 9.5 Regulatory requirements20 9.6 Update of systems and procedures 20 10 Life extension report.21 Bibliography22 PD CEN ISO/TS 12747:2013ISO/TS 12747:2011(E) iv ISO 2011 All rights reservedForewor

15、d ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technica

16、l committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of ele

17、ctrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to th

18、e member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. In other circumstances, particularly when there is an urgent market requirement for such documents, a technical committee may decide to publish other types of

19、normative document: an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in an ISO working group and is accepted for publication if it is approved by more than 50 % of the members of the parent committee casting a vote; an ISO Technical Specification (I

20、SO/TS) represents an agreement between the members of a technical committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting a vote. An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a further three

21、years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an International Standard or be withdrawn. Attention is drawn to the possibility that some of th

22、e elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/TS 12747 was prepared by Technical Committee ISO/TC 67, Materials, equipment and offshore structures for petroleum, petrochemical and natural gas indu

23、stries, Subcommittee SC 2, Pipeline transportation systems. PD CEN ISO/TS 12747:2013ISO/TS 12747:2011(E) ISO 2011 All rights reserved vIntroduction Within ISO/TC 67/SC 2 there has been a series of discussions concerning both the needs and level of prescription required to address pipeline life exten

24、sion issues. These have highlighted that operators are applying differing approaches, which leads to inefficient use of both operator and authority resources; the assessment and upgrading of existing facilities have been based on probabilistic or reliability-based methods; the level of detail delive

25、red varies. The purpose of this Technical Specification is to address the above concerns by providing a consistent approach to pipeline life extension assessment that can be applied by operators (or parties acting on their behalf) across the industry. This Technical Specification is concerned with t

26、he proof of technical integrity of the pipeline system for the justification of extended operation. Integrity management is not covered in detail. However, the interface between a PIMS and the life extension process is considered because a PIMS, where present, forms an integral part of the integrity

27、 assessment of the pipeline system; a PIMS of some form is required for operation in extended life. Factors affecting the future operability of the system but not the technical integrity, such as the loss of a control umbilical, are flagged as requiring assessment but are not addressed in full in th

28、is Technical Specification. Whilst this Technical Specification is aimed primarily at the pipeline operators, it can also be of interest to other stakeholders such as regulators approving the life extension application; members of the public affected by the life extension application, such as landow

29、ners and developers. In light of this, an overview of the life extension process and the key principles involved is given in Clause 5. The remainder of the document is intended to provide detailed guidance to those performing the life extension assessments. All guidance is provided for use in conjun

30、ction with sound engineering practice and judgment. This Technical Specification is not intended for use as a design code. PD CEN ISO/TS 12747:2013PD CEN ISO/TS 12747:2013TECHNICAL SPECIFICATION ISO/TS 12747:2011(E) ISO 2011 All rights reserved 1Petroleum and natural gas industries Pipeline transpor

31、tation systems Recommended practice for pipeline life extension 1 Scope This Technical Specification gives guidance to follow, as a minimum, in order to assess the feasibility of extending the service life of a pipeline system, as defined in ISO 13623, beyond its specified design life. Pump stations

32、, compressor stations, pressure-reduction stations and depots are not specifically addressed in this Technical Specification, as shown in Figure 1. This Technical Specification applies to rigid metallic pipelines. It is not applicable to the following: flexible pipelines; pipelines constructed from

33、other materials, such as glass reinforced plastics; umbilicals; topsides equipment; structures and structural components. This Technical Specification is limited to life extension, which is an example of a change to the original design. Other changes, such as MAOP up-ratings, are excluded. NOTE The

34、assessment methodology is applicable to other changes to the design at the discretion of the user. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the lates

35、t edition of the referenced document (including any amendments) applies. ISO 13623, Petroleum and natural gas industries Pipeline transportation systems PD CEN ISO/TS 12747:2013ISO/TS 12747:2011(E) 2 ISO 2011 All rights reservedKey pipeline systems covered by ISO/TS 12747 connection with other facil

36、ities pipeline not covered by ISO/TS 12747 station/plant area or offshore installation not covered by ISO/TS 12747 station/plant area covered by ISO/TS 12747 Figure 1 Extent of pipeline systems covered by this Technical Specification PD CEN ISO/TS 12747:2013ISO/TS 12747:2011(E) ISO 2011 All rights r

37、eserved 33 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 acceptance criteria specified indicators or measures employed in assessing the ability of a component, structure, or system to perform its intended function 3.2 anomaly discrepancy or d

38、eviation of an element of the pipeline system from the established rules and limits 3.3 design life period for which the design basis is planned to remain valid ISO 13623 3.4 failure event in which a component or system does not perform according to its operational requirements 3.5 flow assurance en

39、suring successful and economical flow of fluid through the pipeline system 3.6 high integrity pressure protection system mechanical overpressure protection system that rapidly isolates the pipeline if there is a risk of exceeding the maximum allowable operating pressure (MAOP) 3.7 life extension add

40、itional period of time beyond the original design or service life (but within the assessed remnant life) for which permission to continue operating a pipeline system is granted by the regulatory bodies NOTE Life extension is considered as a modification to the design basis. 3.8 location class geogra

41、phic area classified according to criteria based on population density and human activity ISO 13623 3.9 maximum allowable operating pressure maximum pressure at which the pipeline system, or parts thereof, is allowed to be operated Adapted from ISO 13623 3.10 operation activities involved with runni

42、ng and maintaining the pipeline system in accordance with the design premise 3.11 operator party ultimately responsible for the operation and integrity of the pipeline system PD CEN ISO/TS 12747:2013ISO/TS 12747:2011(E) 4 ISO 2011 All rights reserved3.12 pipeline integrity management system manageme

43、nt system designed to ensure the safe operation of a pipeline system in accordance with the design intent, by control of the physical condition of a pipeline, the operating conditions within the system and any changes made to the system 3.13 pipeline those facilities through which fluids are conveye

44、d, including pipe, pig traps, components and appurtenances, up to and including the isolating valves Adapted from ISO 13623 3.14 pipeline offshore pipeline laid in maritime waters and estuaries seaward of the ordinary high water mark ISO 13623 3.15 pipeline onshore pipeline laid on or in land, inclu

45、ding lines laid under inland water courses ISO 13623 3.16 pipeline system pipelines, stations, supervisory control and data acquisition system (SCADA), safety systems, corrosion protection systems, and any other equipment, facility or building used in the transportation of fluids ISO 13623 3.17 remn

46、ant life assessed period of time (irrespective of the defined design life) for which a pipeline system can be operated safely, based on time-dependent degradation mechanisms such as corrosion and fatigue 3.18 required life desired operational life of the pipeline, accounting for continued operation

47、beyond the original pipeline design life 3.19 risk qualitative or quantitative likelihood of an event occurring, considered in conjunction with the consequence of the event 3.20 risk management policies, procedures and practices involved in the identification, assessment, control and mitigation of r

48、isks 3.21 service life length of time over which the pipeline system is intended to operate 3.22 technical integrity ability of the pipeline system to function in accordance with the design basis PD CEN ISO/TS 12747:2013ISO/TS 12747:2011(E) ISO 2011 All rights reserved 53.23 threat any activity or c

49、ondition that can adversely affect the pipeline system if not adequately controlled 3.24 topsides structures and equipment placed on a supporting structure (fixed or floating) to provide some or all of a platforms functions 4 Abbreviated terms CP Cathodic protection ECA Engineering critical assessment ESD Emergency shut-down ESDV Emergency shut-down valve HIPPS High integrity pressure protection system ILI In-line inspection IP Intelligent pig MAOP Maximum allowable operating pressure PIMS