EN ISO TR 20172-2009 en Welding - Grouping systems for materials - European materials《焊接 材料分组系统 欧洲材料》.pdf

《EN ISO TR 20172-2009 en Welding - Grouping systems for materials - European materials《焊接 材料分组系统 欧洲材料》.pdf》由会员分享，可在线阅读，更多相关《EN ISO TR 20172-2009 en Welding - Grouping systems for materials - European materials《焊接 材料分组系统 欧洲材料》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、PD CEN ISO/TR20172:2009ICS 25.160.20NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWPUBLISHED DOCUMENTWelding Groupingsystems for materials European materials(ISO/TR 20172:2009)This Published Documentwas published under theauthority of the StandardsPolicy and StrategyCommittee

2、on 31 July 2009 BSI 2009ISBN 978 0 580 52957 3Amendments/corrigenda issued since publicationDate CommentsPD CEN ISO/TR 20172:2009National forewordThis Published Document is the UK implementation of CEN ISO/TR 20172:2009. It is identical to ISO/TR 20172:2009. It supersedesPD CEN ISO/TR 20172:2006 whi

3、ch is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee WEE/36, Qualification of welding personnel and weldingprocedures.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include a

4、ll the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.TECHNICAL REPORTRAPPORT TECHNIQUETECHNISCHER BERICHTCEN ISO/TR 20172June 2009ICS 25.160.20 Supersedes CEN ISO/TR 20172:2006 Engl

5、ish VersionWelding - Grouping systems for materials - European materials(ISO 20172:2009)Soudage - Systmes de groupement des matriaux -Matriaux europens (ISO 20172:2009)Schweien - Werkstoffgruppeneinteilung - EuropischeWerkstoffe (ISO 20172:2009)This Technical Report was approved by CEN on 30 May 200

6、9. It has been drawn up by the Technical Committee CEN/TC 121.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, N

7、orway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form an

8、d by any means reservedworldwide for CEN national Members.Ref. No. CEN ISO/TR 20172:2009: EPD CEN ISO/TR 20172:2009CEN ISO/TR 20172:2009 (E) 3 Foreword This document (CEN ISO/TR 20172:2009) has been prepared by Technical Committee CEN/TC 121 “Welding“, the secretariat of which is held by DIN, in col

9、laboration with Technical Committee ISO/TC 44 “Welding and allied processes“. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This doc

10、ument supersedes CEN ISO/TR 20172:2006. PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) ISO 2009 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 International grouping system for European materials 2 2.1 Types of steel in accordance with the grouping system of ISO/TR 15608

11、:2005, Table 1 . 2 2.2 Types of aluminium and aluminium alloy in accordance with the grouping system of ISO/TR 15608:2005, Table 2 . 21 2.3 Types of copper and copper alloy in accordance with the grouping system of ISO/TR 15608:2005, Table 3 . 23 2.4 Types of cast iron in accordance with the groupin

12、g system of ISO/TR 15608:2005, Table 7 25 2.5 Types of cast iron in accordance with the grouping system of ISO/TR 15608:2005, Table 7, additional . 27 Bibliography . 29 PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) iv ISO 2009 All rights reservedForeword ISO (the International Organization for Standa

13、rdization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right t

14、o be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Sta

15、ndards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an In

16、ternational Standard requires approval by at least 75 % of the member bodies casting a vote. In exceptional circumstances, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art“, for example), it may de

17、cide by a simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely informative in nature and does not have to be reviewed until the data it provides are considered to be no longer valid or useful. Attention is drawn to the possibility that some

18、of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/TR 20172 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 121, Welding, in collaboration with Technica

19、l Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Unification of requirements in the field of metal welding, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). This second edition cancels and replaces the first edition (ISO/TR 201

20、72:2006), which has been technically revised. PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) ISO 2009 All rights reserved vIntroduction This Technical Report reflects the situation in November 2007. Changes in European material standards will be taken into account in the next revision of this Technica

21、l Report. Lists of former designations can be found in the relevant European materials standards. For the materials not listed in this Technical Report, ISO/TR 20173:2005 and ISO/TR 20174:2005 are applicable. PD CEN ISO/TR 20172:2009PD CEN ISO/TR 20172:2009TECHNICAL REPORT ISO/TR 20172:2009(E) ISO 2

22、009 All rights reserved 1Welding Grouping systems for materials European materials 1 Scope This Technical Report establishes a European grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608. It is also applicable for other purposes such

23、 as heat treatment, forming and non-destructive testing. This Technical Report covers grouping systems for the following standardized materials: a) steel; b) aluminium and its alloys; c) copper and its alloys; d) cast irons. In case of dispute, for example where variations in properties such as thic

24、kness and yield strength occur, ISO/TR 15608 applies. PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) 2 ISO 2009 All rights reserved2 International grouping system for European materials 2.1 Types of steel in accordance with the grouping system of ISO/TR 15608:2005, Table 1 See Table 1. Table 1 Steel m

25、aterials, classification according to the grouping of material Designation Name Number Group Standard(s) 10CrMo5-5 1.7338 5.1 EN 10216-2 10CrMo9-10 1.7380 5.2 EN 10028-2, EN 10216-2, EN 10273 11CrMo9-10 1.7383 5.2 EN 10028-2, EN 10216-2, EN 10222-2, EN 10273 11MnNi5-3 1.6212 9.1 EN 10028-4, EN 10216

26、-4 12Ni14 1.5637 9.2 EN 10028-4, EN 10216-4, EN 10222-3 12Ni19 1.5680 9.2 EN 10028-4 13CrMo4-5 1.7335 5.1 EN 10028-2, EN 10216-2, EN 10222-2, EN 10273 13MnNi6-3 1.6217 9.1 EN 10028-4, EN 10216-4, EN 10222-3 14MoV6-3 1.7715 6.1 EN 10216-2, EN 10222-2 15MnCrMoNiV5-3 1.6920 4.1 EN 10222-2 15MnMoV4-5 1.

27、5402 1.2 EN 10222-2 15NiCuMoNb5-64 1.6368 4.2 EN 10216-2 15NiMn6 1.6228 9.1 EN 10028-4, EN 10222-3 16MnCr5 1.7131 1.4 EN 10132-2 16Mo3 1.5415 1.1 EN 10222-2, EN 10216-2, EN 10217-2, EN 10217-5, EN 10273, EN 10028-2 17Cr3 1.7016 1.4 EN 10132-18MnMoNi5-5 1.6308 4.1 EN 10222-2 20CrMoV13-5-5 1.7779 6.3

28、EN 10216-2 20Mn5 1.1133 1.4 EN 10250-20MnB5 1.535 3.2 EN 10083-3 20MnNb6 1.0471 1.2 EN 10216-2 20NiCrMo2-2 1.6523 4.1 EN 10297-1 20NiCrMoS2-2 1.6526 4.1 EN 10297-1 24CrMo13-6 1.8516 5.2 EN 10085 25CrMo4 1.7218 5.1 EN 10083-3, EN 10132-2, EN 10216-2, EN 10297-1 25CrMoS4 1.7213 5.1 EN 10083-3, EN 1027

29、7-5 25Mn4 1.1177 1.3 EN 10132-2 PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) ISO 2009 All rights reserved 3Table 1 (continued) Designation Name Number Group Standard(s) 26CrMo4-2 1.7219 5.1 EN 10216-4 27MnCrB5-2 1.7182 11.1 EN 10083-3 28Mn6 1.1170 1.4 EN 10083-2, EN 10250-2 30CrMo4 1.7216 5.1 EN 102

30、97-1 30MnB5 1.5531 11.1 EN 10083-3 30NiCrMo16-6 1.6747 9.2 EN 10083-3 31CrMo12 1.8515 5.2 EN 10085 31CrMoV9 1.8519 6.2 EN 10085 32CrAlMo7-10 1.8505 5.1 EN 10085 33CrMoV12-9 1.8522 6.2 EN 10085 34Cr4 1.7033 5.2 EN 10083-3 34CrAlMo5-10 1.8507 5.1 EN 10085 34CrAlNi7-10 1.8550 5.1 EN 10085 34CrMo4 1.722

31、0 5.1 EN 10083-3, EN 10132-2, EN 10297-1 34CrMoS4 1.7226 11.2 EN 10083-3 34CrNiMo6 1.6582 4.2 EN 10277-5 34CrS4 1.7037 5.1 EN 10083-3 35NiCr6 1.5815 9.1 EN 10083-36NiCrMo16 1.6773 9.2 EN 10083-3 37Cr4 1.7034 5.1 EN 10083-37CrS4 1.7038 5.1 EN 10083-3 38Cr2 1.7003 5.1 EN 10083-38Mn6 1.1127 11.2 EN 102

32、97-1 39MnCrB6-2 1.7189 5.1 EN 10083-3 39NiCrMo3 1.6510 9.2 EN 10083-3 40CrMoV13-9 1.8523 6.2 EN 10085 41Cr4 1.7035 11.2 EN 10083-3 41CrAlMo7-10 1.8509 5.1 EN 10085 41CrS4 1.703 11.2 EN 10083-3 42CrMo4 1.7225 5.1 EN 10083-3, EN 10132-2, EN 10297-1 42CrMoS4 1.7227 5.1 EN 10083-3, EN 10277-5 46Cr2 1.70

33、06 5.1 EN 10083-3 50CrMo4 1.7228 5.1 EN 10083-51CrV4 1.8159 6.1 EN 10083-3 8MoB5-4 1.5450 1.3 EN 10216-2 PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) 4 ISO 2009 All rights reservedTable 1 (continued) Designation Name Number Group Standard(s) C10 1.0301 1.1 EN 10277-2 C10E 1.1121 1.1 EN 10132-2, EN 1

34、0297-1 C15 1.040 1.1 EN 10277-2 C15E 1.1141 1.1 EN 10132-2, EN 10297-1 C15R 1.1114 1.1 EN 10297-1 C16 1.0407 1.1 EN 10277-2 C22 1.0402 1.2 EN 10250-C22E 1.1151 1.1 EN 10132-2, EN 10083-2, EN 10297-1 C22R 1.1149 1.1 EN 10083-2 C25 1.0406 1.2 EN 10250-C25E 1.1158 1.2 EN 10250-2 C30 1.052 11.1 EN 10250

35、-C30E 1.1178 11.1 EN 10132-2 C35 1.0501 11.1 EN 10083-2, EN 10250-2, EN 10277-2 C35E 1.1181 11.1 EN 10083-2, EN 10250-2, EN 10297-1, EN 10132-2, EN 10277-5 C35R 1.1180 11.1 EN 10277-C35R 1.118 11.2 EN 10083-2 C40 1.0511 11.2 EN 10083-2, EN 10250-2, EN 10277-2 C40E 1.1186 11.2 EN 10083-2, EN 10132-2,

36、 EN 10277-5 C40R 1.1189 11.2 EN 10083-2, EN 10277-5 C45 1.0503 11.2 EN 10083-2, EN 10250-2, EN 10277-2 C45E 1.1191 11.2 EN 10083-2, EN 10250-2, EN 10297-1, EN 10132-2 C45R 1.1201 11.2 EN 10083-2, EN 10277-5 C50 1.0540 11.2 EN 10250-2, EN 10277-2 C50E 1.1206 11.2 EN 10132-2, EN 10277-5 C50E 1.120 11.

37、3 EN 10083-2 C50R 1.1241 11.2 EN 10083-2, EN 10277-5 C55 1.0535 11.3 EN 10250-2, EN 10083-2 C55E 1.1203 11.3 EN 10083-2, EN 10250-2, EN 10132-2 C55R 1.1209 11.3 EN 10083-PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) ISO 2009 All rights reserved 5Table 1 (continued) Designation Name Number Group Stand

38、ard(s) C60 1.0601 11.3 EN 10083-2, EN 10277-2, EN 10250-2 C60E 1.1221 11.3 EN 10083-2, EN 10132-2, EN 10250-2, EN 10297-1, EN 10277-5 C60R 1.1223 11.3 EN 10083-2, EN 10277-5 E155 1.0033 1.1 EN 10296-1, EN 10305-2, EN 10305-3, EN 10305-6 E190 1.0031 1.1 EN 10296-1, EN 10305-3 E195 1.0034 1.1 EN 10296

39、-1, EN 10305-3, EN 10305-6, EN 10305-2 E215 1.0212 1.1 EN 10305-1, EN 10305-4 E220 1.0215 1.1 EN 10296-1, EN 10305-3, EN 10305-5 E235 1.0308 1.1 EN 10296-1, EN 10297-1, EN 10305-1, EN 10305-2, EN 10305-3, EN 10305-4, EN 10305-6 E260 1.0220 1.1 EN 10296-1, EN 10305-3 E260 1.0221 1.1 EN 10305-3 E275 1

40、.0225 1.1 EN 10296-1, EN 10297-1, EN 10305-2, EN 10305-3, EN 10305-5, EN 10305-6 E275K2 1.0456 1.1 EN 10296-1, EN 10297-1 E275M 1.8895 1.1 EN 10296-1 E295GC 1.0533 1.2 EN 10277-2 E315 1.0236 1.2 EN 10297-1 E320 1.0237 1.2 EN 10296-1, EN 10305-3, EN 10305-5 E335GC 1.0543 1.2 EN 10277-2 E355 1.0580 1.

41、2 EN 10296-1, EN 10305-2, EN 10305-3, EN 10305-4, EN 10305-6, EN 10305-1, EN 10297-1 E355K2 1.0599 1.2 EN 10297-E355K2 1.0920 1.2 EN 10296-1 E355M 1.8896 1.2 EN 10296-E370 1.0261 1.3 EN 10296-1, EN 10305-3, EN 10305-5 E420 1.0575 1.3 EN 10305-3, EN 10305-5 E420J2 1.0920 1.3 EN 10297-1 E420M 1.8897 1

42、.3 EN 10296-PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) 6 ISO 2009 All rights reservedTable 1 (continued) Designation Name Number Group Standard(s) E460K2 1.8891 1.3 EN 10296-1, EN 10297-1 E460M 1.8898 1.3 EN 10296-1 E470 1.0536 1.3 EN 10297-E590K2 1.0644 1.3 EN 10297-1 E730K2 1.8893 1.3 EN 10297-G

43、12MoCrV5-2 1.7720 6.1 EN 10213 G17CrMo5-5 1.7357 5.1 EN 10213 G17CrMo9-10 1.7379 5.2 EN 10213 G17CrMoV5-10 1.7706 6.2 EN 10213 G17Mn5 1.1131 1.1 EN 10213 G17NiCrMo13-6 1.6781 9.2 EN 10213 G18Mo5 1.5422 1.2 EN 10213 G20Mn5 1.6220 1.2 EN 10213 G20Mo5 1.5419 3.1 EN 10213-2 G9Ni10 1.5636 9.1 EN 10213 G9

44、Ni14 1.5638 9.2 EN 10213 GP240GH 1.0619 1.1 EN 10213 GP240GR 1.0621 1.1 EN 10213 GP280GH 1.0625 1.2 EN 10213 GX15CrMo5 1.7365 5.3 EN 10213 GX23CrMoV12-1 1.4931 6.4 EN 10213 GX2CrNi19-11 1.4309 8.1 EN 10213 GX2CrNiMo19-11-2 1.4409 8.1 EN 10213 GX2CrNiMoCuN25-6-3-3 1.4517 10.2 EN 10213 GX2CrNiMoN22-5-

45、3 1.4470 10.1 EN 10213 GX2CrNiMoN26-7-4 1.4469 10.2 EN 10213 GX2NiCrMo28-20-2 1.4458 8.1 EN 10213 GX3CrNi13-4 1.6982 7.2 EN 10213 GX4CrNi13-4 1.4317 7.2 EN 10213 GX4CrNiMo16-5-1 1.4405 8.1 EN 10132-2 GX5CrNi19-10 1.4308 8.1 EN 10213 GX5CrNiMo19-11-2 1.4408 8.1 EN 10213 GX5CrNiMoNb19-11-2 1.4581 8.1

46、EN 10213 GX5CrNiNb19-11 1.4552 8.1 EN 10213 GX8CrNi12 1.4107 7.2 EN 10213 HC180B 1.0395 1.1 EN 10268 PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) ISO 2009 All rights reserved 7Table 1 (continued) Designation Name Number Group Standard(s) HC180P 1.0342 1.1 EN 10268 HC180Y 1.092 1.1 EN 10268 HC220B 1.

47、0396 1.1 EN 10268 HC220I 1.034 1.1 EN 10268 HC220P 1.0397 1.1 EN 10268 HC220Y 1.0925 1.1 EN 10268 HC260B 1.0400 1.1 EN 10268 HC260I 1.0349 1.1 EN 10268 HC260LA 1.0480 1.1 EN 10268 HC260P 1.0417 1.1 EN 10268 HC260Y 1.0928 1.1 EN 10268 HC300B 1.0444 1.2 EN 10268 HC300I 1.0447 1.2 EN 10268 HC300LA 1.04

48、89 1.2 EN 10268 HC300P 1.0448 1.2 EN 10268 HC340LA 1.054 1.2 EN 10268 HC380LA 1.0550 1.3 EN 10268 HC420LA 1.0556 1.3 EN 10268 L210GA 1.0319 1.1 EN 10208-1 L235 1.0252 1.1 EN 10224 L235GA 1.0458 1.1 EN 10208-1 L245GA 1.0459 1.1 EN 10208-L245MB 1.0418 1.1 EN 10208-2 L245NB 1.0457 1.1 EN 10208-L275 1.0

49、260 1.1 EN 10224 L290GA 1.0483 1.2 EN 10208-1 L290MB 1.0429 1.2 EN 10208-2 L290NB 1.0484 1.2 EN 10208-L355 1.0419 1.2 EN 10224 L360GA 1.049 1.2 EN 10208-1 L360MB 1.0578 1.2 EN 10208-2 L360NB 1.0582 1.2 EN 10208-L360QB 1.8948 1.2 EN 10208-2 L415MB 1.8973 2.1 EN 10208-L415NB 1.8972 1.3 EN 10208-2 L415QB 1.8947 3.1 EN 10208-PD CEN ISO/TR 20172:2009ISO/TR 20172:2009(E) 8 ISO 2009 All rights reservedTable 1 (continued) Designation Name Number Group Standard(s) L450MB 1.8975 2.1 EN 10208-2 L450QB 1.8952 3.1 EN 10208-L485MB 1.8977 2