EN ISO 21029-2-2015 en Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 2 Operational requirements《低温容器 容量在1000升以内的移动式真空绝缘容器 第二部.pdf

《EN ISO 21029-2-2015 en Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 2 Operational requirements《低温容器 容量在1000升以内的移动式真空绝缘容器 第二部.pdf》由会员分享，可在线阅读，更多相关《EN ISO 21029-2-2015 en Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 2 Operational requirements《低温容器 容量在1000升以内的移动式真空绝缘容器 第二部.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 21029-2:2015Cryogenic vessels Transportable vacuuminsulated vessels of not morethan 1 000 litres volumePart 2: Operational requirementsBS EN ISO 21029-2:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO21029-2:2015. It s

2、upersedes BS EN 1251-3:2000 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PVE/18, Cryogenic vessels.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the n

3、ecessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 78167 4ICS 23.020.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard w

4、as published under the authority of theStandards Policy and Strategy Committee on 30 September 2015.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 21029-2 September 2015 ICS 23.020.40 Supersedes EN 1251-3:2000English Version Cryogenic ve

5、ssels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015) Rcipients cryogniques - Rcipients transportables, isols, sous vide, dun volume nexcdant pas 1 000 litres - Partie 2: Exigences de fonctionnement (ISO 21029-2:2015

6、) Kryo-Behlter - Ortsbewegliche vakuumisolierte Behlter mit einem Fassungsraum von nicht mehr als 1 000 Liter - Teil 2: Betriebsanforderungen (ISO 21029-2:2015) This European Standard was approved by CEN on 23 April 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations whic

7、h stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This Eur

8、opean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members a

9、re the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, R

10、omania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and

11、by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 21029-2:2015 EBS EN ISO 21029-2:2015EN ISO 21029-2:2015 (E) 3 European foreword This document (EN ISO 21029-2:2015) has been prepared by Technical Committee ISO/TC 220 “Cryogenic vessels” in collaboration with Technical Commit

12、tee CEN/TC 268 “Cryogenic vessels and specific hydrogen technologies applications” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2016, and confli

13、cting national standards shall be withdrawn at the latest by March 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document

14、 supersedes EN 1251-3:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this

15、European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

16、 Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 21029-2:2015 has been approved by CEN as EN ISO 21029-2:2015 without any modification. BS EN ISO 21029-2:2015ISO 21029-2:2015(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms

17、 and definitions . 14 Preliminaries before putting into service 24.1 General . 24.2 Marking and labelling . 24.2.1 Marking 24.2.2 Labelling 24.3 Handover documents 35 Personnel training 36 Safety requirements . 36.1 General . 36.2 Safety considerations 46.3 Safety distances 47 Putting into service 5

18、8 Location . 59 Transport . 610 Filling 610.1 General . 610.2 Prefill checks . 610.3 Preparations 710.4 After fill checks . 811 Product withdrawal . 812 Change of service 813 Taking out of service 814 Maintenance and repair 915 Periodic inspection .1016 Additional requirements for flammable gases 10

19、16.1 General safety requirements 1016.1.1 General. 1016.1.2 Electrical equipment .1116.1.3 Earthing system .1116.2 Putting into service 1116.3 Location 1116.4 Transport 1216.5 Filling 1216.6 Change of service . 1216.7 Taking out service . 1216.8 Maintenance and repair . 1217 Emergency equipment and

20、procedures 12Annex A (informative) Safety distances14Bibliography .15 ISO 2015 All rights reserved iiiContents PageBS EN ISO 21029-2:2015ISO 21029-2:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The

21、 work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-gove

22、rnmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in

23、 the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the po

24、ssibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list

25、 of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well a

26、s information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 220, Cryogenic vessels.This second edition cancels and replaces the first edition (ISO 21

27、029-2:2004), which has been technically revised.ISO 21029 consists of the following parts, under the general title Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 l volume: Part 1: Design, fabrication, inspection and tests Part 2: Operational requirementsiv ISO 2015 A

28、ll rights reservedBS EN ISO 21029-2:2015ISO 21029-2:2015(E)IntroductionElements of this part of ISO 21029 support the requirements of the UN Recommendations on the Transport of Dangerous Goods and other international, national, or local requirements.Some requirements of this International Standard m

29、ay be covered by local regulations, e.g. safety distances, occupational safety and health.Where there is a conflict between the requirements of this International Standard and any applicable local regulation, the local regulation always takes precedence. ISO 2015 All rights reserved vBS EN ISO 21029

30、-2:2015BS EN ISO 21029-2:2015Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 2: Operational requirements1 ScopeThis part of ISO 21029 specifies operational requirements for transportable vacuum insulated cryogenic vessels of not more than 1 000 l vo

31、lume designed to operate above atmospheric pressure. Appropriate parts may be used as a guidance for a vessel design to operate open to the atmosphere.For cryogenic vessels designed for personal medical use, other requirements can apply.The scope includes putting into service, filling, withdrawal, t

32、ransport within the location, storage, maintenance, periodic inspection, and emergency procedures.For the transportation of these vessels by public road, rail, sea, and air, other additional requirements can apply; these are defined in specific regulations.Transportable cryogenic vessels of not more

33、 than 1 000 l volume are often partly equipped by the manufacturer, but can be installed or re-installed by another party, such as the operator or owner. For this reason, some of the scope of this part of ISO 21029, which includes putting into service, inspection, filling, maintenance, and emergency

34、 procedure, overlaps with ISO 21029-1.2 Normative referencesThe following referenced documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition

35、 of the referenced document (including any amendments) applies.ISO 21010, Cryogenic vessels Gas/materials compatibilityISO 23208, Cryogenic vessels Cleanliness for cryogenic service3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1putting into ser

36、viceoperation by which a vessel is prepared to be used, applying to either a new vessel being used for the first time or an existing vessel being returned to service3.2fillingoperation by which a transportable vessel undergoes a prefill check, filling with a cryogenic fluid and an after-fill check3.

37、3withdrawaloperation by which the product is taken from a vessel connected to the supply systemINTERNATIONAL STANDARD ISO 21029-2:2015(E) ISO 2015 All rights reserved 1BS EN ISO 21029-2:2015ISO 21029-2:2015(E)3.4outdoor locationlocation outside of any building or structure and not enclosed by more t

38、han two walls3.5underground locationarea or room whose ground or floor is, on all sides, significantly lower than the adjacent ground surfaces3.6safety distancedistance from a piece of equipment with inherent hazard being the minimum separation that will mitigate the effect of a likely foreseeable i

39、ncident and prevent a minor incident escalating into a larger incidentNote 1 to entry: The safety distance is determined in order to provide protection from foreseeable external impact (e.g. roadway, flare) or activities outside the control of the operation (e.g. plant or customer station boundary).

40、3.7vesseltransportable cryogenic vessel as defined in ISO 21029-13.8authorized personperson authorized by the applicable regulations3.9enterpriseany person or company that has a legal duty of care3.10fillerany enterprise that loads cryogenic fluids into a cryogenic vessel3.11ownerenterprise that leg

41、ally owns the cryogenic vessel3.12operatorany enterprise for filling, storage, transport, and withdrawal of cryogenic product4 Preliminaries before putting into service4.1 GeneralBefore putting into service, verification shall take place to ensure that the vessel is suitable for the intended service

42、 and that the marking, labelling, and handover documents are complete.4.2 Marking and labelling4.2.1 MarkingMarking shall be in accordance with the applicable design standard and/or regulations, e.g. ISO 21029-1.4.2.2 LabellingFor labelling, the following shall be affixed:a) flow sheet denoting oper

43、ation;2 ISO 2015 All rights reservedBS EN ISO 21029-2:2015ISO 21029-2:2015(E)b) unshortened identification of the fluid that is being transported in accordance with the transport and substance regulations and its net mass in accordance with the documentation;c) danger labels in accordance with trans

44、port regulations;d) risk and safety phrases associated with the gas content;e) name and address of the fluid producer or supplier.All vessels shall include a product identification label visible from all directions (e.g. 360 wrap-around tape), which can be easily read from a distance of 2 m, and sec

45、urely affixed product labels at the inlet and outlet connections. Additionally, warning labels reading, “Never use adapters or try to change gas connections on the vessel when trying to attach a product distribution connection” shall be affixed at outlet connections.4.3 Handover documentsIn addition

46、 to the manufacturers documentation where necessary, the cryogenic vessel shall be accompanied by vessel specific documents and instructions for all the following items: operations; auxiliary equipment; inspection records.These documents shall be retained by the owner of the vessel.The operator shal

47、l have appropriate instructions available. Such instructions may be attached to the vessel in a permanent manner.5 Personnel trainingOnly persons trained for the specific task shall be allowed to put into service, fill, handle, operate, or maintain the vessel and its accessories.The training program

48、me shall include the following: normal procedures; product and hazard identification; safe operating limits; emergency procedures; physical and chemical properties of the vessels contents and their effects on the human body; personnel protective equipment (e.g. safety boots/goggles/gloves).Training

49、shall be repeated as necessary to ensure that personnel remain competent. A training record shall be maintained which details the information that the personnel have received.6 Safety requirements6.1 GeneralMarking and labelling shall not be removed or defaced.Appropriate warning signs, regarding product hazards and personnel protective equipment requirements, shall be displayed. ISO 2015 All rights reserved 3BS EN ISO 21029-2:2015ISO 21029-2:2015(E)Parts under pressure shall be disconnected, only, if they have been previously de