EN ISO 15186-1-2003 en Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1 Laboratory measurements《声学 声强度法测量建筑物中和建筑构件隔音.pdf

《EN ISO 15186-1-2003 en Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1 Laboratory measurements《声学 声强度法测量建筑物中和建筑构件隔音.pdf》由会员分享，可在线阅读，更多相关《EN ISO 15186-1-2003 en Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 1 Laboratory measurements《声学 声强度法测量建筑物中和建筑构件隔音.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 15186-1:2003 Incorporating Amendment No. 1 to BS ISO 15186-1:2000 (renumbers the BS ISO as BS EN ISO 15186-1:2003) Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements The European Standard EN

2、 ISO 15186-1:2003 has the status of a British Standard ICS 91.120.20 BS EN ISO 15186-1:2003 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 15 January 2001 BSI 13 October 2003 ISBN 0 580 34694 3 National foreword This British Standard is the

3、official English language version of EN ISO 15186-1:2003. It is identical with ISO 15186-1:2000. The UK participation in its preparation was entrusted by Technical Committee EH/1, Acoustics, to Subcommittee EH/1/6, Building acoustics, which has the responsibility to: A list of organizations represen

4、ted on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”

5、, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer

6、 immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate

7、 them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii to iv, pages 1 to 14, the Annex ZA page and a back cover. The BSI copyright notice displayed in this document indicates when t

8、he document was last issued. Amendments issued since publication Amd. No. Date Comments 14637 13 October 2003 Implementation of the European StandardEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO151861 July2003 ICS91.120.20 Englishversion AcousticsMeasurementofsoundinsulationinbuildingsandof b

9、uildingelementsusingsoundintensityPart1:Laboratory measurements(ISO151861:2000) AcoustiqueMesurageparintensitdelisolation acoustiquedesimmeublesetdeslmentsdeconstruction Partie1:Mesuragesenlaboratoire(ISO151861:2000) AkustikBestimmungderSchalldmmunginGebuden undvonBauteilenausSchallintensittsmessung

10、enTeil1: MessungenimPrfstand(ISO151861:2000) ThisEuropeanStandardwasapprovedbyCENon2July2003. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalrefer

11、encesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementC

12、entrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Hungary,Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,SwitzerlandandUn ited Kingdom. EUROPEANCOMMITTE

13、EFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2003CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO151861:2003EINESO51681:1002(3E) 2 Foreword ThetextofISO151861:2000hasbe

14、enpreparedbyTechnicalCommitteeISO/TC43 “Acoustics”oftheInternationalOrganizationforStandardization(ISO)andhasbeentakenover asENISO151861:2003byTechnicalCommitteeCEN/TC126“Acousticpropertiesofbuilding productsandofbuildings“,thesecretariatofwhichisheldbyAFNOR. ThisEuropeanStandardshallbegiventhestatu

15、sofanationalstandard,eitherbypublicationof anidenticaltextorbyendorsement,atthelatestbyJanuary2004,andconflictingnational standardsshallbewithdrawnatthelatestbyJanuary2004. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsof thefollowingcountriesareboundtoimplementthisEu

16、ropeanStandard:Austria,Belgium,Czech Republic,Denmark,Finland,France,Germany,Greece,Hungary,Iceland,Ireland,Italy, Luxembourg,Malta,Netherlands,Norway,Portugal,Slovakia,Spain,Sweden,Switzerlandand theUnitedKingdom. Endorsementnotice ThetextofISO151861:2000hasbeenapprovedbyCENasENISO151861:2003withou

17、tany modifications. NOTENormativereferencestoInternationalStandardsarelistedinAnnexZA(normative). ENISO151861:2003Reference number ISO 15186-1:2000(E) OSI 0002 INTERNATIONAL STANDARD ISO 15186-1 First edition 2000-03-01 Acoustics Measurement of sound insulation in buildings and of building elements

18、using sound intensity Part 1: Laboratory measurements Acoustique Mesurage par intensit de lisolation acoustique des immeubles et des lments de construction Partie 1: Mesurages en laboratoire ENISO151861:2003ii ENISO151861:2003ISO -681511:(0002E) ISO 0002 All irhgts seredevr iii Contents Page Forewor

19、d.iv 1 Scope 1 2 Normative references 1 3 Terms and definitions .1 4 Instrumentation4 5 Test arrangement.5 6 Test procedure.6 7 Expression of results 9 8 Test report 9 Annex A (informative) Estimated precision of the method.11 Annex B (informative) Adaption term K c .12 Bibliography14 ENISO151861:20

20、03ISO -681511:(0002E) iv ISO 0002 All irhgts seredevr Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.

21、Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internat

22、ional Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies

23、for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 15186 may be the subject of patent rights. ISO shall not be held responsible for identifyin

24、g any or all such patent rights. International Standard ISO 15186-1 was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics. ISO 15186 consists of the following parts, under the general title Acoustics Measurement of sound insulation in buildings and of buildi

25、ng elements using sound intensity: Part 1: Laboratory measurements Part 2: Field measurements Part 3: Laboratory measurements at low frequencies Annexes A and B of this part of ISO 15186 are for information only. ENISO151861:2003INTENRATIONAL TSANDADR ISO -681511:(0002E) ISO 0002 All irhgts seredevr

26、 1 Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements 1 Scope This part of ISO 15186 specifies a sound intensity method to determine the sound reduction index and the element- normalized level difference of building e

27、lements. The method can be used as an alternative to ISO 140-3 and ISO 140-10 respectively. One important use is when the traditional ISO 140-3 method fails because of high flanking transmission. The reproducibility of this intensity method is estimated to be equal to or better than that of ISO 140-

28、3. NOTE Some information about the accuracy with which this part of ISO 15186 can reproduce the sound reduction index measured according to ISO 140-3 is given in annex A. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute pro

29、visions of this part of ISO 15186. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 15186 are encouraged to investigate the possibility of applying the most recent edition of the normativ

30、e documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 140-1, Acoustics Measurement of sound insulation in buildings and of building elements Part

31、 1: Requirements for laboratoy test facilities with suppressed flanking transmission. ISO 140-3, Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements. ISO 140-10, Acoustics Measurement of sou

32、nd insulation in buildings and of building elements Part 10: Laboratory measurement of airborne sound insulation of small building elements. ISO 9614-1:1993, Acoustics Determination of sound power levels of noise sources using sound intensity Measurement at discrete points. IEC 60942, Sound calibrat

33、ors. IEC 61043, Electroacoustics Instruments for the measurement of sound intensity Measurement with pairs of pressure sensing microphones. 3 Terms and definitions For the purposes of this part of ISO 15186, the following terms and definitions apply. ENISO151861:2003ISO -681511:(0002E) 2 ISO 0002 Al

34、l irhgts seredevr 3.1 average sound pressure level in a source room L p1 ten times the logarithm to the base 10 of the ratio of the space and time average of the sound pressure squared to the square of the reference sound pressure, the space average being taken over the entire room with the exceptio

35、n of those parts where the direct radiation of a sound source or the near field of the boundaries (wall, window, etc.) is of significant influence NOTE 1 This quantity is given in decibels. NOTE 2 For a complete definition, see ISO 140-3. 3.2 sound reduction index R ten times the logarithm to the ba

36、se 10 of the ratio of the sound power W 1 incident on the test specimen to the sound power W 2 transmitted through the specimen R W W F H G I K J 10 1 2 lg dB (1) NOTE The expression “sound transmission loss“ is also in use. 3.3 sound intensity I time-averaged rate of flow of sound energy per unit a

37、rea oriented normal to the local particle velocity; this is a vectorial quantity which is equal to I T pt ut t T z 1 0 () ()d (2) where p(t) is the instantaneous sound pressure at a point, in pascals; ut ( ) is the instantaneous particle velocity at the same point, in metres per second; T is the ave

38、raging time, in seconds NOTE Sound intensity is measured in watts per square metre. 3.4 normal sound intensity I n component of the sound intensity in the direction normal to a measurement surface defined by the unit normal vector n: IIn n (3) where n is the unit normal vector directed out of the vo

39、lume enclosed by the measurement surface 3.5 normal sound intensity level L In ten times the logarithm to the base 10 of the ratio of the unsigned value of the normal sound intensity to the reference intensity I 0 ,a sg i ve nby : ENISO151861:2003ISO -681511:(0002E) ISO 0002 All irhgts seredevr 3 L

40、I I In n 0 dB 10 lg (4) where I 0 12 10 W/m 2 3.6 surface pressure-intensity indicator F p difference between the sound pressure level, L p , and the normal sound intensity level, L In , on the measurement surface, both being time and surface averaged: FLL pI p I n (5) NOTE This notation is in accor

41、dance with ISO 9614-2. In ISO 9614-1 the notation F 2 is used. 3.7 pressure-residual intensity index pI0 difference between the indicated sound pressure level, L p , and the indicated sound intensity level, L I , when the intensity probe is placed and oriented in a sound field such that the sound in

42、tensity is zero NOTE 1 It is expressed in decibels. NOTE 2 Details for determining pI0 are given in IEC 61043: pI p I LL 0 di (6) 3.8 intensity sound reduction index R I for one source room and one receiving room, which also may be the exterior, this is the index evaluated from equation (1), assumin

43、g that the sound field in the source room is diffuse: RL L S S Ip I F H G I K J L N M O Q P 1 61 0 n m lg dB (7) where L p1 is the average sound pressure level in the source room; L In is the average sound intensity level over the measurement surface in the receiving room; S m is the total area of t

44、he measurement surface(s); S is the area of the test specimen under test. NOTE The weighted intensity sound reduction index, R I,w , is calculated according to ISO 717-1 by replacing R with R I . 3.9 intensity element normalized level difference D I,n,e difference given by: DLL S A N IpI , lg lg( )

45、ne n m 0 dB F H G I K J F H G I K J 1 61 01 0 ( 8 ) ENISO151861:2003ISO -681511:(0002E) 4 ISO 0002 All irhgts seredevr where L p1 is the average sound pressure level in the source room; L In is the average sound intensity level over the measurement surface in the receiving room; N is the number of s

46、mall building element units installed within the measurement surface; S m is the total area of the measurement surface(s); A 0 =10m 2 . NOTE The weighted intensity element normalized level difference, D I,n,e,w , is calculated according to ISO 717-1 by replacing D n,e with D I,n,e . 3.10 modified in

47、tensity sound reduction index R I,M index given by: RRK II ,M c (9) where the values of the adaption term K c are given in annex B NOTE 1 In theory the sound reduction index determined using the traditional measurement method (ISO 140-3) is overestimated due to the fact that the sound power radiated into the receiving room is underestimated. To account for this fact, if the aim of the intensity measurements is to simulate measurements according to ISO 140-3, the intensity sound reduction index should be modified as above. NOTE