EN ISO 12402-2-2006 en Personal flotation devices - Part 2 Lifejackets performance level 275 - Safety requirements (Incorporates Amendment A1 2010)《人员漂浮装置 第2部分 性能等级275救生背心 安全要求 包含修.pdf

《EN ISO 12402-2-2006 en Personal flotation devices - Part 2 Lifejackets performance level 275 - Safety requirements (Incorporates Amendment A1 2010)《人员漂浮装置 第2部分 性能等级275救生背心 安全要求 包含修.pdf》由会员分享，可在线阅读，更多相关《EN ISO 12402-2-2006 en Personal flotation devices - Part 2 Lifejackets performance level 275 - Safety requirements (Incorporates Amendment A1 2010)《人员漂浮装置 第2部分 性能等级275救生背心 安全要求 包含修.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN ISO 12402-2:2006Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirementsICS 13.340.70g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60

2、g3g38g50g51g60g53g44g42g43g55g3g47g36g58+A1:20 01National forewordThis British Standard is the UK implementation of EN ISO 12402-2:2006+A1:2010. It is identical to ISO 12402-2:2006, incorporating amendment 1:2010. It supersedes BS EN ISO 12402-2:2006 which is withdrawn.The start and finish of text i

3、ntroduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO text carry the number of the ISO amendment. For example, text altered by ISO amendment 1 is indicated by !“.The UK participation in its preparation was entrusted by Technical Committee PH/3, Protective

4、 clothing, to Subcommittee PH/3/6, Buoyancy garments.A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compli

5、ance with a British Standard cannot confer immunity from legal obligations.BS EN ISO 12402-2:2006+A1:2010This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2006 BSI 2010Amendments/corrigenda issued since publicationDate Comments 31 A

6、ugust 2010 Implementation of ISO amendment 1:2010 with CEN endorsement A1:2010ISBN 978 0 580 71253 1EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12402-2:2006ICS 13.340.70 English Version Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requirements (ISO 12

7、402-2:2006 quipements individuels de flottabilit - Partie 2: Gilets de sauvetage, niveau de performance 275 - Exigences de scurit (ISO 12402-2:2006Persnliche Auftriebsmittel - Teil 2: Rettungswesten, Stufe 275 - Sicherheitstechnische Anforderungen (ISO 12402-2:2006 This European Standard was approve

8、d by CEN on 6 August 2006. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national sta

9、ndards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified t

10、o the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,

11、Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any

12、 form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12402-2:2006 : E+A1June 2010+A1:2010)+A1:2010) +A1:2010)+A1:2010Foreword This document (EN ISO 12402-2:2006) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection

13、and lifejackets“, the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 188 “Small craft“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2007, and confl

14、icting national standards shall be withdrawn at the latest by March 2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), se

15、e informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, F

16、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword to amendment A1 This document (EN ISO 12402-2:2006/A1:2010) has been prepared by

17、 Technical Committee ISO/TC 188 “Small craft“ in collaboration with Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets” the secretariat of which is held by DIN. This Amendment to the European Standard EN ISO 12402-2:2006/Amd 1:2010 shall be given th

18、e status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be

19、 the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Di

20、rective. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulga

21、ria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice

22、The text of ISO 12402-2:2006/Amd 1:2010 has been approved by CEN as a EN ISO 12402-2:2006/A1:2010 without any modification. BS EN ISO 12402-2:2006+A1:2010EN ISO 12402-2:2006+A1:2010 (E)iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 1 4 Cla

23、ssification. 3 4.1 Classes 3 4.2 Performance levels. 4 5 Requirements 4 5.1 General. 4 5.2 Combination of lifejackets and accessories 5 5.3 Types of buoyancy . 6 5.4 Conspicuousness. 7 5.5 Strength . 7 5.6 Performance 8 5.7 Multi-chamber buoyancy systems 9 6 Marking 9 6.1 General. 9 6.2 Information

24、on the lifejacket 9 7 Information supplied by the manufacturer 11 8 Consumer information at point of sale. 11 8.1 General. 11 8.2 Plain text version 11 8.3 Data list 14 8.4 Pictograms 15 8.5 Colour-code. 15 Bibliography . 16 Annex ZA (informative) Relationship between this standard and the Essential

25、 Requirements of EU Directive 89/686/EEC 17 BS EN ISO 12402-2:2006+A1:2010EN ISO 12402-2:2006+A1:2010 (E)iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is n

26、ormally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part i

27、n the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prep

28、are International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that s

29、ome of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 12402-2 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 162, Protective clothing including hand a

30、nd arm protection and lifejackets, in collaboration with Technical Committee ISO/TC 188, Small craft, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). ISO 12402 consists of the following parts, under the general title Personal flotation devices: Part

31、1: Lifejackets for seagoing ships Safety requirements Part 2: Lifejackets, performance level 275 Safety requirements Part 3: Lifejackets, performance level 150 Safety requirements Part 4: Lifejackets, performance level 100 Safety requirements Part 5: Buoyancy aids (level 50) Safety requirements Part

32、 6: Special purpose lifejackets and buoyancy aids Safety requirements and additional test methods Part 7: Materials and components Safety requirements and test methods Part 8: Accessories Safety requirements and test methods Part 9: Test methods Part 10: Selection and application of personal flotati

33、on devices and other relevant devices BS EN ISO 12402-2:2006+A1:2010EN ISO 12402-2:2006+A1:2010 (E)vIntroduction ISO 12402 has been prepared to give guidance on the design and application of personal flotation devices (hereafter referred to as PFDs) for persons engaged in activities, whether in rela

34、tion to their work or their leisure, in or near water. PFDs manufactured, selected, and maintained to this standard should give a reasonable assurance of safety from drowning to a person who is immersed in water. Requirements for lifejackets on large, commercial seagoing ships are regulated by the I

35、nternational Maritime Organization (IMO) under the International Convention for the Safety of Life at Sea (SOLAS). ISO 12402-1 addresses lifejackets for seagoing ships. ISO 12402 allows for the buoyancy of a PFD to be provided by a wide variety of materials or designs, some of which may require prep

36、aration before entering the water (e.g. inflation of chambers by gas from a cylinder or blown in orally). However, PFDs can be divided into the following two main classes: those which provide face up in-water support to the user regardless of physical conditions (lifejackets), and those which requir

37、e the user to make swimming and other postural movements to position the user with the face out of the water (buoyancy aids). Within these main two classes there are a number of levels of support, types of buoyancy, activation methods for inflatable devices, and auxiliary items (such as location aid

38、s), all of which will affect the users probability of survival. Within the different types of buoyancy allowed, inflatable PFDs either provide full buoyancy without any user intervention other than arming (i.e. PFDs inflated by a fully automatic method) or require the user to initiate the inflation.

39、 Hybrid PFDs always provide some buoyancy but rely on the same methods as inflatable PFDs to achieve full buoyancy. With inherently buoyant PFDs, the user only needs to put the PFD on to achieve the performance of its class. PFDs that do not require intervention (automatically operating PFDs) are su

40、ited to activities where persons are likely to enter the water unexpectedly; whereas PFDs requiring intervention (e.g. manually inflated PFDs) are only suitable for use if the user believes there will be sufficient time to produce full buoyancy, or help is close at hand. In every circumstance, the u

41、ser should ensure that the operation of the PFD is suited to the specific application. The conformity of a PFD to this part of ISO 12402 does not imply that it is suitable for all circumstances. The relative amount of required inspection and maintenance is another factor of paramount importance in t

42、he choice and application of specific PFDs. ISO 12402 is intended to serve as a guide to manufacturers, purchasers, and users of such safety equipment in ensuring that the equipment provides an effective standard of performance in use. Equally essential is the need for the designer to encourage the

43、wearing of the equipment by making it comfortable and attractive for continuous wear on or near water, rather than for it to be stored in a locker for emergency use. Throwable devices and flotation cushions are not covered by this part of ISO 12402. The primary function of a PFD is to support the us

44、er in reasonable safety in the water. Within the two classes, alternative attributes make some PFDs better suited to some circumstances than others or make them easier to use and care for than others. Important alternatives allowed by ISO 12402 are the following: to provide higher levels of support

45、(levels 100, 150, or 275) that generally float the user with greater water clearance, enabling the users efforts to be expended in recovery rather than avoiding waves; or to provide lighter or less bulky PFDs (levels 50 or 100); to provide the kinds of flotation (inherently buoyant foam, hybrid, and

46、 inflatable) that will accommodate the sometimes conflicting needs of reliability and durability, in-water performance, and continuous wear; BS EN ISO 12402-2:2006+A1:2010EN ISO 12402-2:2006+A1:2010 (E)vi to provide automatically operating (inherently buoyant or automatically inflated) PFDs that flo

47、at users without any intervention on their part, except in initially donning the PFD (and regular inspection and rearming of inflatable types), or to provide user control of the inflatable PFDs buoyancy by manual and oral operation; and to assist in detection (location aids) and recovery of the user

48、. PFDs provide various degrees of buoyancy in garments that are light in weight and only as bulky and restrictive as needed for their intended use. They will need to be secure when worn, in order to provide positive support in the water and to allow the user to swim or actively assist herself/himsel

49、f or others. The PFD selected shall ensure that the user is supported with the mouth and nose clear of the water under the expected conditions of use and the users ability to assist. Under certain conditions (such as rough water and waves), the use of watertight and multilayer clothing, which provide (intentionally or otherwise) additional buoyancy, or the use of equipment with additional weight (such as tool belts) will likely alter the performance of the PFD. Users, owners and employers need to ensure that this is taken