EN ISO 10472-3-2008 en Safety requirements for industrial laundry machinery - Part 3 Washing tunnel lines including component machines《工业洗衣机安全要求 第3部分 管道式洗涤(联合)机及相关机械》.pdf

《EN ISO 10472-3-2008 en Safety requirements for industrial laundry machinery - Part 3 Washing tunnel lines including component machines《工业洗衣机安全要求 第3部分 管道式洗涤(联合)机及相关机械》.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10472-3-2008 en Safety requirements for industrial laundry machinery - Part 3 Washing tunnel lines including component machines《工业洗衣机安全要求 第3部分 管道式洗涤(联合)机及相关机械》.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO10472-3:2008ICS 97.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSafety requirementsfor industrial laundrymachineryPart 3: Washing tunnel linesincluding component machines (ISO10472-3:1997)This British Standardwas published under theauthority of th

2、e StandardsPolicy and StrategyCommittee on 31 May2009. BSI 2009ISBN 978 0 580 63654 7Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 10472-3:2008National forewordThis British Standard is the UK implementation of EN ISO10472-3:2008. It is identical to ISO 10472-3:1997. It superse

3、des BS ENISO 10472-3:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/33, Textile machinery.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the nec

4、essary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 10472-3October 2008ICS 97.060 Supersedes EN ISO 10472-3:1997 English VersionSafety r

5、equirements for industrial laundry machinery - Part 3:Washing tunnel lines including component machines (ISO10472-3:1997)Exigences de scurit pour les machines de blanchisserieindustrielle - Partie 3: Trains de lavage incluant lesmachines composantes (ISO 10472-3:1997)Sicherheitsanforderungen fr indu

6、strielleWschereimaschinen - Teil 3: Durchlaufwaschanlageneinschlielich Einzelmaschinen (ISO 10472-3:1997)This European Standard was approved by CEN on 12 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStan

7、dard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French,

8、 German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech

9、 Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN D

10、E NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 10472-3:2008: EBS EN ISO 10472-3:2008EN ISO 10472-3:2008 (E) 3 Foreword The

11、text of ISO 10472-3:1997 has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10472-3:2008 by Technical Committee CEN/TC 214 “Texti

12、le machinery and accessories” the secretariat of which is held by SNV. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the late

13、st by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10427-3:1997. This document has b

14、een prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/

15、CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lu

16、xembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10472-3:1997 has been approved by CEN as a EN ISO 10472-3:2008 without any modification. BS EN ISO 10472-3:2008EN ISO 10472-3:200

17、8 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide a means of conforming

18、 to Essential Requirements of the New Approach Directive Machinery 98/37/EC, amended by 98/79/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the nor

19、mative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements (except 1.7.4. (f) of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to

20、 the product(s) falling within the scope of this standard. BS EN ISO 10472-3:2008EN ISO 10472-3:2008 (E) 5 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CE

21、N by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive Machinery 2006/42/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implem

22、ented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements (except 1.4.2.1 2, 1.7.3, 1.7.4.2 t) and u) of that Directi

23、ve and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 10472-3:2008ISO ISO 10472-3:1997(E)iiiForewordISO (the International Organization for Standardization) is a worldwide federa

24、tion of national standardsbodies (ISO member bodies). The work of preparing International Standards is normally carried out throughISO technical committees. Each member body interested in a subject for which a technical committee hasbeen established has the right to be represented on that committee.

25、 International organizations,governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaboratesclosely with the International Electrotechnical Commission (IEC) on all matters of electrotechnicalstandardization.Draft International Standards adopted by the technical c

26、ommittees are circulated to the member bodies forvoting. Publication as an International Standard requires approval by at least 75 % of the member bodiescasting a vote.International Standard ISO 10472-3 was prepared by Technical Committee ISO/TC 72, Textile machinery andmachinery for dry-cleaning an

27、d industrial laundering, Subcommittee SC 5, Industrial laundry anddry-cleaning machinery.ISO 10472 consists of the following parts, under the general title Safety requirements for industrial laundrymachinery: Part 1: Common requirements Part 2: Washing machines and washer-extractors Part 3: Washing

28、tunnel lines including component machines Part 4: Air dryers Part 5: Flatwork ironers, feeders and folders Part 6: Ironing and fusing pressesBS EN ISO 10472-3:2008ISO 10472-3:1997(E) ISOivIntroductionThis part of ISO 10472 is intended to instruct the designer of industrial laundry machinery in a sys

29、tematicmanner, focusing on his particular type of machine, regarding the relevant essential safety requirements,and to suggest possible state-of-the-art safety solutions.The extent to which hazards are covered is indicated in the scope of this part of ISO 10472. In addition,machinery should comply a

30、s appropriate with ISO/TR 12100-1 and ISO/TR 12100-2 for hazards which are notspecifically referred to in this part of ISO 10472.All examples given in this part of ISO 10472 represent the state of the art. Equivalent solutions areacceptable, provided they attain at least the same safety level.The de

31、signer is presumed to have taken into account all the provisions of ISO 10472-1 before consideringthis part of ISO 10472.BS EN ISO 10472-3:2008INTERNATIONAL STANDARD ISO ISO 10472-3:1997(E)1Safety requirements for industrial laundry machinery Part 3:Washing tunnel lines including component machines1

32、 ScopeThis part of ISO 10472 covers, together with ISO 10472-1, most significant hazards associated with washingtunnel lines including component machines such as: continuous tunnel washing machines; squeeze presses or centrifugal extraction machines; transfer conveyor systems; automatic transfer tum

33、blers; loading or unloading system interfaces; access platform and ladders.This part of ISO 10472 does not cover particular hazards for continuous stand-alone washing lines forendless towels.This part of ISO 10472 does not cover the hazards caused by processing work which may create anexplosive or f

34、lammable atmosphere inside the machine.This part of ISO 10472 complements the basic requirements laid down in ISO/TR 12100-1 andISO/TR 12100-2. It also gives guidance to the designer on assessing the risks associated with the hazards(see EN 1050) and on selecting measures for attaining the required

35、safety level.This part of ISO 10472 does not apply to ancillary equipment, e. g. chemical store and supply pumps, steamvalves and supply pipework, vent systems, work feed systems and discharge systems and ducting to theatmosphere.2 Normative referencesThe following standards contain provisions which

36、, through reference in this text, constitute provisions ofthis part of ISO 10472. At the time of publication, the editions indicated were valid. All standards are subjectto revision, and parties to agreement based on this part of ISO 10472 are encouraged to investigate thepossibility of applying the

37、 most recent editions of the standards indicated below. Members of IEC and ISOmaintain registers of currently valid International Standards.ISO 6182-1:1993, Fire protection Automatic sprinkler systems Part 1: Requirements and test methodsfor sprinklers.ISO 10472-1:1997, Safety requirements for indus

38、trial laundry machinery Part 1: Common requirements.ISO/TR 12100-1:1992, Safety of machinery Basic concepts, general principles for design Part 1: Basicterminology, methodology.BS EN ISO 10472-3:2008ISO 10472-3:1997(E) ISO2ISO/TR 12100-2:1992, Safety of machinery Basic concepts, general principles f

39、or design Part 2:Technical principles and specifications.ISO 13849-1:1), Safety of machinery Safety-related parts of control systems Part 1: General principlesfor design.ISO 13852:1996, Safety of machinery Safety distances to prevent danger zones being reached by theupper limbs.ISO 14119:1), Safety

40、of machinery Interlocking devices associated with guards Principles for designand selection.EN 616:1), Continuous handling equipment and systems Common safety requirements for design,manufacturing, erection and commissioning stages.EN 620:1), Continuous handling equipment and systems Equipment for m

41、echanical handling both unitloads and bulk materials Special safety requirements for design, manufacturing, erection andcommissioning stages.EN 746-2:1997, Industrial thermoprocessing equipment Part 2: Safety requirements for combustion andfuel handling systems.EN 953:1997, Safety of machinery Gener

42、al requirements for the design and construction of guards (fixed,movable).EN 1037:1995, Safety of machinery Prevention of unexpected start-up.EN 1050:1996, Safety of machinery Risk assessment.EN 1760-1:1997, Safety of machinery Pressure sensitive protective devices Part 1: General principlesfor the

43、design and testing of pressure sensing mats and floors.EN 1760-2:1), Safety of machinery Pressure sensitive protective devices Part 2: General principles forthe design and testing of pressure sensitive edges and pressure sensitive bars.EN 50100-1:1), Safety of machinery Electro-sensitive protective

44、devices Part 1: General requirementsand tests.EN 60204-1:1992, Safety of machinery Electrical equipment of machines Part 1: General requirements.IEC 204-1:1992, modified3 DefinitionsFor the purposes of this part of ISO 10472, the following definitions apply:3.1washing tunnel lineComplete integrated

45、system of linked machines for the washing, moisture extraction and drying ordisentangling of discrete batches of textile fabric, including all necessary equipment for supply of water,steam, gas, electricity and chemicals.3.2continuous tunnel washing machineMachine designed to wash items in successiv

46、e loads as a continuous process.NOTE This machine may consist of one cage rotating around a longitudinal axis and subdivided into separatecompartments, or several cages or several machines linked by means of a transfer system.1)To be published.BS EN ISO 10472-3:2008ISO ISO 10472-3:1997(E)33.3squeeze

47、 pressMachine for the mechanical extraction of moisture from textile fabrics by the application of pressure.NOTE It is designed to receive loads of textile material automatically from a tunnel washing machine and to removemoisture by applying pressure (e. g. by a flexible membrane). Such a machine m

48、ay be arranged with one or twopressure stations where the pressure may be applied hydraulically, mechanically or pneumatically.3.4centrifugal extraction machineMachine containing a perforated cage to and from which successive loads are transferred and within whichthe loads are subjected to a centrif

49、ugal force due to the rotation of the cage for the purpose of extractingmoisture.3.5transfer conveyor systemHandling equipment for conveying loads from moisture extraction machines to tumble dryers to provideautomatically controlled storage and handling between washing and drying processes.3.6automatic transfer tumble dryerMachine for moisture extraction from a load of damp textile material by tumbling in a rotating cage in anatmosphere of hot air.NOTE It may be designed on the p