EN ISO 10426-4-2004 en Petroleum and natural gas industries - Cements and materials for well cementing - Part 4 Preparation and testing of foamed cement slurries at atmospheric pre.pdf

《EN ISO 10426-4-2004 en Petroleum and natural gas industries - Cements and materials for well cementing - Part 4 Preparation and testing of foamed cement slurries at atmospheric pre.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10426-4-2004 en Petroleum and natural gas industries - Cements and materials for well cementing - Part 4 Preparation and testing of foamed cement slurries at atmospheric pre.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISO 10426-4:2004 Petroleum and natural gas industries Cements and materials for well cementing Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004) The European Standard EN ISO 10426-4:2004:2004 has the status of a British Standa

2、rd ICS 75.020; 91.100.10 BS EN ISO 10426-4:2004 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 4 April 2005 BSI 4 April 2005 ISBN 0 580 45745 1 National foreword This British Standard is the official English language version of EN ISO 10426-

3、4:2004. It is identical with ISO 10426-4:2004. The UK participation in its preparation was entrusted by Technical Committee PSE/17, Materials and equipment for petroleum, petrochemical and natural gas industries, to Subcommittee PSE/17/-/3, Drilling and completion fluids and well cements, which has

4、the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section

5、entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compl

6、iance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related

7、 international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, a blank page, the ISO title page, pages ii to v, a blank page, pages 1 to 13 and a back cover. The BSI copyright notice displa

8、yed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO104264 December2004 ICS91.100.10;75.020 Englishversion PetroleumandnaturalgasindustriesCementsandmaterials forwellcementingP

9、art4:Preparationandtestingoffoamed cementslurriesatatmosphericpressure(ISO104264:2004) IndustrieduptroleetdugaznaturelCimentset matriauxpourlacimentationdespuitsPartie4: Prparationetessaisenconditionsambiantesdeslaitiers decimentmousse(ISO104264:2004) ErdlundErdgasindustrieZementeundMaterialenfr die

10、ZementationvonTiefbohrungenTeil4:Vorbereitung undPrfungvonSchaumzementbrhenunter atmosphrischenBedingungen(ISO104264:2004) ThisEuropeanStandardwasapprovedbyCENon21December2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardth

11、estatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nsl

12、ation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithu

13、ania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyforman

14、dbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO104264:2004:Eblank Reference number ISO 10426-4:2004(E) ISO 2004INTERNATIONAL STANDARD ISO 10426-4 First edition 2004-03-01 Petroleum and natural gas industries Cements and materials for well cementing Part 4: Preparation and testing of

15、 foamed cement slurries at atmospheric pressure Industrie du ptrole et du gaz naturel Ciments et matriaux pour la cimentation des puits Partie 4: Prparation et essais en conditions ambiantes des laitiers de ciment mousse ENISO104264:2004IS-62401 O4:(4002E) DPlcsid Fremia ihTs PDF file may ctnoian em

16、debt dedyfepcaes. In ccaocnadrw eith Aebods licensilop gnic,y this file mairp eb ynted iv roweb detu slahl ton ide ebtlnu deess the typefaces whice era hml era deddebicsnede to i dnanstlaled t noeh computfrep reormign tide ehtin.g In wodlnidaot gnhis file, trapise atpecc tiereht nser ehnopsiiblity f

17、o not infriigngn Aebods licensilop gnic.y ehT ISO tneClar Secrteiraat caceptl on siibality in this .aera Ai ebods a tredamafo kr Aebod SystemI sncotaropr.de teDails fo teh softwacudorp erts sut deo crtaee this PDF file cna f ebi dnuon tlareneG eh Info leratit evo the file; tP ehDc-Frtaeion maraptere

18、w setpo erimizde for irpnti.gn Evyre caer neeb sah taken to sneeru that the file is suitlbae fosu re yb ISO memdob rebeis. In tlnu ehikletneve y ttah lborp aem leratit gno it is f,dnuo plsaee inform ttneC ehlar Secrteiraat ta the serddaig sleb nevwo. ISO 4002 All irthgs erse.devr lnUeto sswrehise sp

19、ecified, on trap fo this lbupictaion maeb y cudorperro de tuilizi den yna form ro na ybm ynae,s lecetrinoc ro mecinahcal, inclidung tohpcoiypodna gn micrfoilm, wittuoh repmissii non writign from ietI rehSa Ot tsserdda eh ebolw or ISOs memreb i ydobn the cnuotrfo y ttseuqer ehe.r ISO cirypothg fofice

20、 saCe tsopale 65 eneG 1121-HC 02 av leT. 4 + 10 947 22 1 11 xaF0 947 22 14 + 9 74 E-mail coirypthgiso.o gr We bwww.is.o gro Pulbisdehi n Switlrez dnaii ISO 4002 Allr ithgsr esedevrENISO104264:2004IS-62401 O4:(4002E) I SO 4002 All irthgs ersedevr iiiContents Page Foreword iv Introduction v 1 Scope 1

21、2 Normative references . 1 3 Sampling 1 4 Slurry calculations 1 5 Apparatus. 5 6 Preparation of base cement slurry 5 7 Preparation of foamed cement slurry at atmospheric pressure 6 8 Example calculations for the preparation of foamed cement slurry at atmospheric pressure . 7 9 Atmospheric testing of

22、 foamed cement slurries . 9 10 Determination of other properties of base unfoamed cement slurry 12 Bibliography . 13 ENISO104264:2004IS-62401 O4:(4002E) iv I SO 4002 All irthgs ersedevrForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards b

23、odies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizati

24、ons, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the

25、 ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of t

26、he member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10426-4 was prepared by Technical Committee ISO/TC 67, Materials

27、, equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 3, Drilling and completion fluids, and well cements. ISO 10426 consists of the following parts, under the general title Petroleum and natural gas industries Cements and materials for well cem

28、enting: Part 1: Specification Part 2: Testing of well cements Part 3: Testing of deepwater well cement formulations Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure E

29、NISO104264:2004IS-62401 O4:(4002E) I SO 4002 All irthgs ersedevr vIntroduction Users of this part of ISO 10426 should be aware that further or differing requirements may be needed for individual applications. This part of ISO 10426 is not intended to inhibit a vendor from offering, or the purchaser

30、from accepting, alternative equipment or engineering solutions for the individual application. This may be particularly applicable where there is innovative or developing technology. Where an alternative is offered, the vendor should identify any variations from this International Standard and provi

31、de details. Cements or cement blends used for foamed cement slurry preparation at atmospheric pressure should be fit for purpose. Such cements could include well cements of ISO Classes, high alumina cement, or other speciality cements. The cements and blending materials should conform to appropriate

32、 standards. Where International Standards do not exist, conformance with other appropriate standards should be made. In this part of ISO 10426, where practical, U.S. Customary units are included in brackets for information. ENISO104264:2004blank 4002:462401OSINEINTENRATIONAL TSANDADR IS-62401 O4:(40

33、02E)I SO 4002 All irthgs ersedevr 1Petroleum and natural gas industries Cements and materials for well cementing Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure 1 Scope This part of ISO 10426 defines the methods for the generation and testing of foamed cement slurri

34、es and their corresponding unfoamed base cement slurries at atmospheric pressure. 2 Normative references The following normative document is indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the ref

35、erenced document (including any amendments) applies. ISO 10426-2:2003, Petroleum and natural gas industries Cements and materials for well cementing Part 2: Testing of well cements 3 Sampling 3.1 General Samples of the cement material or cement blend, solid and liquid additives, and water used for m

36、ixing are required to test a foamed cement slurry in accordance with this part of ISO 10426. Accordingly, the best available sampling technology should be employed to ensure the test materials match as closely as possible those found at the well site. 3.2 Method Applicable sampling techniques for th

37、e fluids and materials used in foamed cementing operations can be found in ISO 10426-2:2003, Clause 4. If required, the temperatures of the mix water, cement or cement blends, and liquid additives may be measured with a thermocouple or thermometer capable of measuring temperature with an accuracy of

38、 2 C ( 3,5 F). These temperatures should be recorded. Temperature- measuring devices shall be calibrated (in the case of a thermocouple) or checked for accuracy (in the case of a thermometer) annually. 4 Slurry calculations 4.1 Calculation of base cement slurry composition with and without surfactan

39、t(s) The final base cement slurry for preparing a foamed cement slurry contains surfactant(s), which cannot be added to the base cement slurry for initial mixing. This requires calculation of the relative mass percentage (mass fraction) of the surfactant(s) in the foamed cement slurry. This is done

40、by taking the total mass of the ENISO104264:2004ISO 10426-4:2004(E) 2 I SO 4002 All irthgs ersedevrsurfactant(s) and dividing by the total mass of the base cement slurry. (For these calculations, additives are considered those materials added to the cement that do not result in foaming the system.)

41、The mass fraction (percentage) of surfactant(s) can be calculated by: w s= m s /(m c+ m a+ m s+ m w ) 100 (1) where w sis the mass fraction of surfactant(s), expressed as a percent; m sis the mass of surfactant(s), expressed in grams; m cis the mass of cement, expressed in grams; m ais the mass of a

42、dditive(s), expressed in grams; m wis the mass of water, expressed in grams. If desired, the base cement slurry density without surfactant ( bwos ) can be calculated, in grams per cubic centimetre, by: caw bwos caw mmm VVV + = +(2) where m cis the mass of cement, expressed in grams; m ais the mass o

43、f additive(s), expressed in grams; m wis the mass of water, expressed in grams; V cis the absolute volume of cement, expressed in cubic centimetres; V ais the absolute volume of additive(s), expressed in cubic centimetres; V wis the volume of water, expressed in cubic centimetres. 4.2 Determination

44、of slurry volume and mass 4.2.1 Slurry volume 4.2.1.1 General Determine the volume of unfoamed base cement slurry to be used. The total volume of unfoamed base cement slurry shall include the volume of surfactant(s) to be added to the base cement slurry. The surfactant(s) is(are) added after the ini

45、tial mixing of the base cement slurry. The volume of unfoamed base cement slurry with surfactants to be placed in the blending container can be calculated by one of two methods (see 4.2.1.2 and 4.2.1.3). ENISO104264:2004ISO 10426-4:2004(E) I SO 4002 All irthgs ersedevr 34.2.1.2 Known gas content Whe

46、n it is desired to foam a slurry with a specific volume fraction of gas per volume of slurry (foam quality), the resultant density of the foamed cement slurry must be determined. This can be calculated by: g fs ufss 100 100 = (3) where fsis the density of the foamed cement slurry, expressed in kilog

47、rams per cubic metre (pounds-mass per gallon); gis the volume fraction of gas in the final foamed cement slurry, expressed as a percent; ufssis the density of the unfoamed base cement slurry with surfactant(s), expressed in kilograms per cubic metre (pounds-mass per gallon). 4.2.1.3 Known foamed cem

48、ent slurry density When the desired density of the foamed cement slurry is known or after calculating it with Equation (3), determine the mass, in grams, of cement slurry including surfactant(s) to be placed into the blending container to prepare the foamed cement slurry. The mass of unfoamed base cement slurry with surfactant(s) can be calculated by: ufss mc fs mV =(4) where m ufssis the mass of