EN ISO 10140-5-2010 en Acoustics - Laboratory measurement of sound insulation of building elements - Part 5 Requirements for test facilities and equipment (Incorporates Amendment A.pdf

《EN ISO 10140-5-2010 en Acoustics - Laboratory measurement of sound insulation of building elements - Part 5 Requirements for test facilities and equipment (Incorporates Amendment A.pdf》由会员分享，可在线阅读，更多相关《EN ISO 10140-5-2010 en Acoustics - Laboratory measurement of sound insulation of building elements - Part 5 Requirements for test facilities and equipment (Incorporates Amendment A.pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN ISO 10140-5:2010Acoustics Laboratory measurement of sound insulation of building elementsPart 5: Requirements for test facilities and equipmentBS EN ISO 10140-5:2010+A1:2014BS EN ISO 10140-5:2010+A1:2014 BRITISH STANDARDNational forewordThis British Standard is the UK

2、implementation of EN ISO 10140-5:2010+A1:2014. It supersedes BS EN ISO 10140-5:2010, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO text carry the number of the ISO amendment. For example, text alter

3、ed by ISO amendment 1 is indicated by .The UK participation in its preparation was entrusted by Technical Committee EH/1, Acoustics to Subcommittee, EH/1/6, Building acoustics.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does n

4、ot purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 78717 1ICS 91.120.20Compliance with a British Standard cannot confer immunity from legal

5、obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2011.Amendments/corrigenda issued since publicationDate Text affected30 June 2014 Implementation of ISO amendment 1:2014 with CEN endorsement A1:2014EUROPEAN STANDARD NOR

6、ME EUROPENNE EUROPISCHE NORM EN ISO 10140-5 September 2010 ICS 91.120.20 Supersedes EN 20140-10:1992, EN ISO 140-1:1997, EN ISO 140-11:2005, EN ISO 140-16:2006, EN ISO 140-3:1995, EN ISO 140-6:1998, EN ISO 140-8:1997English Version Acoustics - Laboratory measurement of sound insulation of building e

7、lements - Part 5: Requirements for test facilities and equipment (ISO 10140-5:2010) Acoustique - Mesurage en laboratoire de lisolation acoustique des lments de construction - Partie 5: Exigences relatives aux installations et appareillage dessai (ISO 10140-5:2010) Akustik - Messung der Schalldmmung

8、von Gebudeteilen im Prfstand - Teil 5: Anforderungen an Prfstnde und Prfeinrichtungen (ISO 10140-5:2010) This European Standard was approved by CEN on 14 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Sta

9、ndard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, Fren

10、ch, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia

11、, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZAT

12、ION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10140-5:2010: EEN ISO 10140-5:2010+A1May 2014BS EN ISO

13、10140-5:2010 EN ISO 10140-5:2010 (E) 3 Foreword This document (EN ISO 10140-5:2010) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNO

14、R. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of

15、 the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 140-16:2006, EN 20140-10:1992, EN ISO 140-11:2005, EN ISO 140-1:1997, EN ISO 140-3:1995, EN ISO 140-8:19

16、97, EN ISO 140-6:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hu

17、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10140-5:2010 has been approved by CEN as a EN ISO 10140-5:2010 without any m

18、odification. BS EN ISO 10140-5:2010+A1:2014EN ISO 10140-5:2010+A1:2014 (E)EN ISO 10140-5:2010/A1:2014 (E) 3 Foreword This document (EN ISO 10140-5:2010/A1:2014) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with the Technical Committee CEN/TC 126 “Acoustic propertie

19、s of building elements and of buildings” the secretariat of which is held by AFNOR. This Amendment to the European Standard EN ISO 10140-5:2010 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2014, and conflict

20、ing national standards shall be withdrawn at the latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to

21、 the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece

22、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10140-5:2010/Amd 1:2014 has been approved by CEN as EN ISO 10140

23、-5:2010/A1:2014 without any modification. Foreword to amendment A1BS EN ISO 10140-5:2010ISO 10140-5:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Normative references1 3 Laboratory test facilities for airborne sound insulation measurements .2 4 Laborator

24、y test facilities for impact sound insulation measurements8 5 Equipment 9 Annex A (normative) Estimation of the maximum measurable sound reduction index .10 Annex B (normative) Standard basic elements for measuring the improvement of airborne sound insulation by linings13 Annex C (normative) Standar

25、d floors for measuring the improvement of impact sound insulation by floor coverings .17 Annex D (normative) Qualification procedure for loudspeakers and loudspeaker positions 23 Annex E (normative) Standard tapping machine.27 Annex F (normative) Alternative impact sound sources 29 Annex G (normativ

26、e) Wooden mock-up floor for measuring the improvement of impact sound insulation by floor coverings .34 Bibliography35 BS EN ISO 10140-5:2010+A1:2014ISO 10140-5:2010+A1:2014 (E)Annex H (normative) Specification of heavy and intense rain with example of a tank with perforated base .35Annex I (informa

27、tive) Reference test specimens for rainfall sound measurements39Bibliography .41BS EN ISO 10140-5:2010ISO 10140-5:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The w

28、ork of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-govern

29、mental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The

30、 main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.

31、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10140-5 was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building ac

32、oustics. This first edition of ISO 10140-5, together with ISO 10140-1, ISO 10140-2, ISO 10140-3 and ISO 10140-4, cancels and replaces ISO 140-1:1997, ISO 140-3:1995, ISO 140-6:1998, ISO 140-8:1997, ISO 140-10:1991, ISO 140-11:2005 and ISO 140-16:2006, which have been technically revised. It also inc

33、orporates the Amendments ISO 140-1:1997/Amd.1:2004 and ISO 140-3:1995/Amd.1:2004. ISO 10140 consists of the following parts, under the general title Acoustics Laboratory measurement of sound insulation of building elements: Part 1: Application rules for specific products Part 2: Measurement of airbo

34、rne sound insulation Part 3: Measurement of impact sound insulation Part 4: Measurement procedures and requirements Part 5: Requirements for test facilities and equipment BS EN ISO 10140-5:2010+A1:2014ISO 10140-5:2010+A1:2014 (E)BS EN ISO 10140-5:2010ISO 10140-5:2010(E) ISO 2010 All rights reserved

35、vIntroduction ISO 10140 (all parts) concerns laboratory measurement of the sound insulation of building elements (see Table 1). ISO 10140-1 specifies the application rules for specific elements and products, including specific requirements for preparation, mounting, operating and test conditions. IS

36、O 10140-2 and ISO 10140-3 contain the general procedures for airborne and impact sound insulation measurements, respectively, and refer to ISO 10140-4 and this part of ISO 10140 where appropriate. For elements and products without a specific application rule described in ISO 10140-1, it is possible

37、to apply ISO 10140-2 and ISO 10140-3. ISO 10140-4 contains basic measurement techniques and processes. This part of ISO 10140 contains requirements for test facilities and equipment. For the structure of ISO 10140 (all parts), see Table 1. ISO 10140 (all parts) was created to improve the layout for

38、laboratory measurements, ensure consistency and simplify future changes and additions regarding mounting conditions of test elements in laboratory and field measurements. It is intended for ISO 10140 (all parts) to present a well-written and arranged format for laboratory measurements. It is intende

39、d to update ISO 10140-1 with application rules for other products. It is also intended to incorporate ISO 140-18 into ISO 10140 (all parts). BS EN ISO 10140-5:2010+A1:2014ISO 10140-5:2010+A1:2014 (E)Text deletedBS EN ISO 10140-5:2010ISO 10140-5:2010(E) vi ISO 2010 All rights reservedTable 1 Structur

40、e and contents of ISO 10140 (all parts) Relevant part of ISO 10140 Main purpose, contents and use Detailed content ISO 10140-1 It indicates the appropriate test procedure for elements and products. For certain types of element/product, it can contain additional and more specific instructions about q

41、uantities and test element size and about preparation, mounting and operating conditions. Where no specific details are included, the general guidelines are according to ISO 10140-2 and ISO 10140-3. Appropriate references to ISO 10140-2 and ISO 10140-3 and product-related, specific and additional in

42、structions on: specific quantities measured; size of test element; boundary and mounting conditions; conditioning, testing and operating conditions; additional specifics for test report. ISO 10140-2 It gives a complete procedure for airborne sound insulation measurements according to ISO 10140-4 and

43、 ISO 10140-5. For products without specific application rules, it is sufficiently complete and general for the execution of measurements. However, for products with specific application rules, measurements are carried out according to ISO 10140-1, if available. Definitions of main quantities measure

44、d General mounting and boundary conditions General measurement procedure Data processing Test report (general points) ISO 10140-3 It gives a complete procedure for impact sound insulation measurements according to ISO 10140-4 and ISO 10140-5. For products without specific application rules, it is su

45、fficiently complete and general for the execution of measurements. However, for products with specific application rules, measurements are carried out according to ISO 10140-1, if available. Definitions of main quantities measured General mounting and boundary conditions General measurement procedur

46、e Data processing Test report (general points) ISO 10140-4 It gives all the basic measurement techniques and processes for measurement according to ISO 10140-2 and ISO 10140-3 or facility qualifications according to ISO 10140-5. Much of the content is implemented in software. Definitions Frequency r

47、ange Microphone positions SPL measurements Averaging, space and time Correction for background noise Reverberation time measurements Loss factor measurements Low-frequency measurements Radiated sound power by velocity measurement ISO 10140-5 It specifies all information needed to design, construct a

48、nd qualify the laboratory facility, its additional accessories and measurement equipment (hardware). Test facilities, design criteria: volumes, dimensions; flanking transmission; laboratory loss factor; maximum achievable sound reduction index; reverberation time; influence of lack of diffusivity in

49、 the laboratory. Test openings: standard openings for walls and floors; other openings (windows, doors, small technical elements); filler walls in general. Requirements for equipment: loudspeakers, number, positions; tapping machine and other impact sources; measurement equipment. Reference constructions: basic elements for airborne and impact insulation improvement; corresponding reference performance curves. BS EN ISO 10140-5:2010+A1:2014ISO 10140-5:2010+A1:2